Microbial fuel cells (MFCs) with interpolymer cation exchange membranes

Interpolymer cation exchange membranes have been prepared from the system polyethylene/poly(styrene-co-divinylbenzene) [PE/poly(St-co-DVB)] by their sulfonation with a solution of chlorosulfonic acid in 1,2-dichloroethane. The membranes have been characterized electrochemically in mediator-less microbial fuel cell (MFC). MFC has worked on Escherichia coli bacteria with ferrocyanide as an oxidizer. Real-time voltage and current measurement gave us reliable results. Consequently, it was found that the amount of DVB in the copolymer is the main factor that determines the electrical efficiency of the membrane.

[1]  Q. Nguyen,et al.  Properties of interpolymer PESS ion-exchange membranes in contact with solvents of different polarities , 1997 .

[2]  G. Poźniak,et al.  Tubular interpolymer ion-exchange membranes. Donnan dialysis through strong-base membranes , 1990 .

[3]  H. P. Bennetto,et al.  Microbial fuel-cells , 1993 .

[4]  F. C. Wilson,et al.  The morphology in nafion† perfluorinated membrane products, as determined by wide- and small-angle x-ray studies , 1981 .

[5]  Byung Hong Kim,et al.  A mediator-less microbial fuel cell using a metal reducing bacterium, Shewanella putrefaciens , 2002 .

[6]  D. Chin,et al.  A Hydrogen‐Bromine Cell for Energy Storage Applications , 1980 .

[7]  C. R. Martin,et al.  Investigations of the O sub 2 reduction reaction at the platinum/Nafion interface using a solid-state electrochemical cell. Technical report , 1991 .

[8]  G. Poźniak,et al.  Interpolymer anion exchange membranes, II. Properties of weak base membranes obtained by chemical and physical modification of the PE/poly(St‐co‐DVB) system , 1982 .

[9]  G. Poźniak,et al.  Interpolymer anion exchange membranes, I. Properties of weak base membranes based on polyethylene modified by styrene and divinylbenzene in the presence of diluents , 1980 .

[10]  G. Poźniak,et al.  Tubular interpolymer ion exchange membranes 1. Cation exchange membranes based on polyethylene modified with styrene-divinylbenzene copolymers , 1984 .

[11]  Stephen Stinson,et al.  Electrolytic cell membrane development surges , 1982 .

[12]  Stuart Wilkinson,et al.  “Gastrobots”—Benefits and Challenges of Microbial Fuel Cells in FoodPowered Robot Applications , 2000, Auton. Robots.

[13]  A. Włochowicz,et al.  On the structure of styrene‐divinyl benzene copolymers as obtained by small‐angle X‐ray scattering , 1988 .

[14]  Itamar Willner,et al.  Biofuel cell based on glucose oxidase and microperoxidase-11 monolayer-functionalized electrodes , 1998 .