Integration of EDM within a CIM Environment

Abstract This paper has as its focus the integration of Electrical Discharge Machining (EDM) within a Computer Integrated Manufacturing (CIM) environment. Clearly, the induction of EDM into advanced manufacturing system with high levels of computer integration and automated material handling has progressed at a much slower rate than the integration of conventional machining processes such as milling and turning. However, recent developments in communications, controls and CAD/CAM system for EDM have created the potential for bringing EDM into the mainstream of automated machining operations in modern manufacturing systems. Following a brief review of CIM, the paper shows that EDM is a very promising candidate for integration within a CIM environment because of its intrinsic process control and intelligence when compared to many traditional processing techniques. Examples of several rather complete experimental EDM/CIM systems set up within research facilities are described. Conclusions are drawn based upon the experiences gathered to date with these experimental systems.

[1]  Pieter Kesteloot,et al.  New CAD/CAM developments for an improved competitivity of European mouldmakers , 1989 .

[2]  Michael J. Shaw,et al.  Task Bidding and Distributed Planning in Flexible Manufacturing , 1985, CAIA.

[3]  N. A. Duffie,et al.  Synthesis of heterarchical manufacturing systems , 1990 .

[4]  B. Schumacher,et al.  Integration of Toolmaking into CAD/CAM Systems , 1984 .

[5]  Jean-Pierre Kruth,et al.  Steps Towards an Integrated CAD/CAM System for Mould Design and Manufacture: Anisotropic Shrinkage, Component Library and Link to NC Machining and EDM , 1986 .

[6]  Randall Steeb,et al.  Strategies of Cooperation in Distributed Problem Solving , 1983, IJCAI.

[7]  C. McLean,et al.  A proposed hierarchical control model for automated manufacturing systems , 1986 .

[8]  Bahram Ravani,et al.  Computer Aided Geometric Design of Line Constructs , 1991 .

[9]  Raymond Snoeys,et al.  Knowledge-Based System for Wire EDM , 1988 .

[10]  Taylan Altan.  Design and Manufacture of Dies and Molds , 1987 .

[11]  Neil A. Duffie,et al.  Fault-tolerant heterarchical control of heterogeneous manufacturing system entities , 1988 .

[12]  Karl G. Kempf,et al.  Complexity, Uncertainty, and Opportunistic Scheduling , 1985, Conference on Artificial Intelligence Applications.

[13]  J. Hatvany,et al.  Intelligence and cooperation in heterarchic manufacturing systems , 1985 .

[14]  Hiroyuki Yoshikawa,et al.  Intelligent CAD in Manufacturing , 1987 .

[15]  N. Duffie,et al.  CAD-Directed Inspection, Error Analysis and Manufacturing Process Compensation Using Tricubic Solid Databases , 1988 .

[16]  Walter Eversheim,et al.  Changes in the Role of Production Management in the CIM-Era , 1986 .

[17]  Raymond Snoeys,et al.  Current Trends in Non-Conventional Material Removal Processes , 1986 .

[18]  Jean-Pierre Kruth,et al.  A generalized post-processor and process-planner for five-axes wire EDM-machines , 1988 .