An investigation of the stepped thermography technique for defects evaluation in GFRP materials

Abstract The ability of thermography to detect defects in composite materials has been demonstrated and showed in various works and in many applications. In this regard, various NDT techniques are currently used for defect detection in composites such as Lock-in Thermography (LT), Pulsed (PT) Stepped Thermography (ST/SH), all of which have their own peculiarities and capabilities. A critical aspect concerns the overall lengthy time required for testing and analysis of thermographic data above all, for large structure where it is necessary a scanning approach. In this work, two algorithms based on the stepped thermography approach were investigated in quantitative way with the aim to optimizing the testing parameters and data analysis in terms of testing time and signal to noise ratio. In particular, several tests were carried out on a sample specimen with simulated defects and the well-established lock-in thermography technique has been used as comparison.

[1]  Riadh Al-Mahaidi,et al.  Investigation of the Parameters that Influence the Accuracy of Bond Defect Detection in CFRP Bonded Specimens Using IR Thermography , 2010 .

[2]  Steven M. Shepard,et al.  Advances in pulsed thermography , 2001, SPIE Defense + Commercial Sensing.

[3]  C. Garnier,et al.  The detection of aeronautical defects in situ on composite structures using Non Destructive Testing , 2011 .

[4]  Clemente Ibarra Castanedo,et al.  Quantitative subsurface defect evaluation by pulsed phase thermography: depth retrieval with the phase , 2005 .

[5]  Y. Çengel.  Introduction to thermodynamics and heat transfer , 1996 .

[6]  Giuseppe Pitarresi.  Thermal NDE of thick GRP panels by means of a Pulse Modulated Lock-In Thermography technique , 2010 .

[7]  Andrew Makeev,et al.  Measurement of voids in composites by X-ray Computed Tomography , 2013 .

[8]  Davide Palumbo,et al.  Study of damage evolution in composite materials based on the Thermoelastic Phase Analysis (TPA) method , 2017 .

[9]  P. Venegas,et al.  Feature extraction and analysis for automatic characterization of impact damage in carbon fiber composites using active thermography , 2013 .

[10]  Darryl P Almond,et al.  A new technique to detect defect size and depth in composite structures using digital shearography and unconstrained optimization , 2012 .

[11]  Anna Castellano,et al.  Some advancements in the ultrasonic evaluation of initial stress states by the analysis of the acoustoelastic effect , 2017 .

[12]  Davide Palumbo,et al.  Assessment of the effect of defects on mechanical properties of adhesive bonded joints by using non destructive methods , 2016 .

[13]  Nezih Mrad,et al.  Pulsed thermography for non-destructive evaluation and damage growth monitoring of bonded repairs , 2009 .

[14]  Davide Palumbo,et al.  A new rapid thermographic method to assess the fatigue limit in GFRP composites , 2016 .

[15]  D. Almond,et al.  A quantitative analysis of pulsed video thermography , 1991 .

[16]  Antonino Squillace,et al.  Non-destructive control of industrial materials by means of lock-in thermography , 2002 .

[17]  Phil E. Irving,et al.  Detection of impact damage in CFRP laminates by means of electrical potential techniques , 2007 .

[18]  Giuseppe Pitarresi,et al.  Lock-In Signal Post-Processing Techniques in Infra-Red Thermography for Materials Structural Evaluation , 2015 .

[19]  F. Taillade,et al.  Shearography and pulsed stimulated infrared thermography applied to a nondestructive evaluation of FRP strengthening systems bonded on concrete structures , 2011 .

[20]  S. Tuli,et al.  Theory of frequency modulated thermal wave imaging for nondestructive subsurface defect detection , 2006 .

[21]  Branko Klarin,et al.  Thermal imaging and Thermoelastic Stress Analysis of impact damage of composite materials , 2011 .

[22]  Daniel L. Balageas,et al.  Comparative Assessment of Thermal NDT Data Processing Techniques for Carbon Fiber Reinforced Polymers , 2017 .

[23]  A. Baker,et al.  Composite Materials for Aircraft Structures , 2004 .

[24]  Davide Palumbo,et al.  Damage Investigation in Composite Materials by Means of New Thermal Data Processing Procedures , 2016 .

[25]  V. P. Vavilov,et al.  Review of pulsed thermal NDT: Physical principles, theory and data processing , 2015 .

[26]  Xavier Maldague,et al.  Theory and Practice of Infrared Technology for Nondestructive Testing , 2001 .

[27]  T. S. Ramamurthy,et al.  Estimation of impact-induced damage in CFRP laminates through ultrasonic imaging , 1998 .

[28]  Aguinaldo Fraddosio,et al.  Ultrasonic goniometric immersion tests for the characterization of fatigue post-LVI damage induced anisotropy superimposed to the constitutive anisotropy of polymer composites , 2017 .

[29]  Kozo Saito,et al.  Infrared thermography for inspecting the adhesion integrity of plastic welded joints , 2006 .

[30]  Carosena Meola,et al.  Comparison between pulsed and modulated thermography in glass-epoxy laminates , 2002 .

[31]  Douglas C. Montgomery,et al.  Applied Statistics and Probability for Engineers, Third edition , 1994 .

[32]  Yunze He,et al.  Volume or inside heating thermography using electromagnetic excitation for advanced composite materials , 2017 .

[33]  Daniel L. Balageas,et al.  Common tools for quantitative time-resolved pulse and step-heating thermography – part I: theoretical basis , 2014 .

[34]  Yunze He,et al.  Optically and non-optically excited thermography for composites: A review , 2016 .

[35]  Sergio Oller,et al.  Impact damage identification in composite laminates using vibration testing , 2014 .