Use of two structurally similar small molecular acceptors enabling ternary organic solar cells with high efficiencies and fill factors

Ternary blends have shown great potential to increase the power conversion efficiency (PCE) of organic solar cells (OSCs). In this work, we studied a ternary OSC system with a donor polymer (PM6) and two structurally similar non-fullerene acceptors (named ITCPTC and MeIC). Although these two small molecular acceptors (SMAs) exhibit similar absorption spectra, they introduce a surprising synergistic effect on tuning the domain size and crystallinity of the OSC blend. More specifically, MeIC is a SMA with strong crystallinity, which results in excessive phase segregation and large domain size for the PM6:MeIC binary blend. By adding a structurally similar and less crystalline SMA (ITCPTC) into the binary blend, the domain size and morphology of the blend are much improved without sacrificing the electron mobility of the blend. As a result, the optimal blend ratio of PM6 : ITCPTC : MeIC (1 : 0.4 : 0.6) led to an impressive FF of 78.2% and PCE of 14.13%, which are the highest values reported for ternary non-fullerene OSCs reported to date.

[1]  Fujun Zhang,et al.  Ternary nonfullerene polymer solar cells with efficiency >13.7% by integrating the advantages of the materials and two binary cells , 2018 .

[2]  F. Liu,et al.  Optimized Fibril Network Morphology by Precise Side‐Chain Engineering to Achieve High‐Performance Bulk‐Heterojunction Organic Solar Cells , 2018, Advanced materials.

[3]  Yongsheng Chen,et al.  Nonfullerene Tandem Organic Solar Cells with High Performance of 14.11% , 2018, Advanced materials.

[4]  Stephen R. Forrest,et al.  High fabrication yield organic tandem photovoltaics combining vacuum- and solution-processed subcells with 15% efficiency , 2018 .

[5]  Fujun Zhang,et al.  Efficient ternary non-fullerene polymer solar cells with PCE of 11.92% and FF of 76.5% , 2018 .

[6]  Fei Huang,et al.  Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells. , 2018, Chemical reviews.

[7]  Fujun Zhang,et al.  Dithieno[3,2‐b:2′,3′‐d]pyrrol Fused Nonfullerene Acceptors Enabling Over 13% Efficiency for Organic Solar Cells , 2018, Advanced materials.

[8]  H. Ade,et al.  Multiple Cases of Efficient Nonfullerene Ternary Organic Solar Cells Enabled by an Effective Morphology Control Method , 2018 .

[9]  Fujun Zhang,et al.  High-efficiency and air stable fullerene-free ternary organic solar cells , 2018 .

[10]  C. McNeill,et al.  An Alkylated Indacenodithieno[3,2‐b]thiophene‐Based Nonfullerene Acceptor with High Crystallinity Exhibiting Single Junction Solar Cell Efficiencies Greater than 13% with Low Voltage Losses , 2018, Advanced materials.

[11]  F. Liu,et al.  Fine‐Tuning of Molecular Packing and Energy Level through Methyl Substitution Enabling Excellent Small Molecule Acceptors for Nonfullerene Polymer Solar Cells with Efficiency up to 12.54% , 2018, Advanced materials.

[12]  Yongfang Li,et al.  High‐Performance As‐Cast Nonfullerene Polymer Solar Cells with Thicker Active Layer and Large Area Exceeding 11% Power Conversion Efficiency , 2018, Advanced materials.

[13]  Ling Hong,et al.  Ternary Nonfullerene Polymer Solar Cells with 12.16% Efficiency by Introducing One Acceptor with Cascading Energy Level and Complementary Absorption , 2018, Advanced materials.

[14]  W. Choy,et al.  Highly Efficient Ternary‐Blend Polymer Solar Cells Enabled by a Nonfullerene Acceptor and Two Polymer Donors with a Broad Composition Tolerance , 2017, Advanced materials.

[15]  S. Forrest,et al.  High Efficiency Near-Infrared and Semitransparent Non-Fullerene Acceptor Organic Photovoltaic Cells. , 2017, Journal of the American Chemical Society.

[16]  Liming Ding,et al.  Ternary organic solar cells offer 14% power conversion efficiency. , 2017, Science bulletin.

[17]  Yongfang Li,et al.  High-performance nonfullerene polymer solar cells with open-circuit voltage over 1 V and energy loss as low as 0.54 eV , 2017 .

[18]  Yongfang Li,et al.  Side Chain Engineering on Medium Bandgap Copolymers to Suppress Triplet Formation for High‐Efficiency Polymer Solar Cells , 2017, Advanced materials.

[19]  Yongfang Li,et al.  Side-Chain Effects on Energy-Level Modulation and Device Performance of Organic Semiconductor Acceptors in Organic Solar Cells. , 2017, ACS applied materials & interfaces.

[20]  Fujun Zhang,et al.  Side Group Engineering of Small Molecular Acceptors for High‐Performance Fullerene‐Free Polymer Solar Cells: Thiophene Being Superior to Selenophene , 2017 .

[21]  Yongfang Li,et al.  High Efficiency Ternary Nonfullerene Polymer Solar Cells with Two Polymer Donors and an Organic Semiconductor Acceptor , 2017 .

[22]  H. Yao,et al.  Two Well‐Miscible Acceptors Work as One for Efficient Fullerene‐Free Organic Solar Cells , 2017, Advanced materials.

[23]  Jiang Huang,et al.  Achieving 12.8% Efficiency by Simultaneously Improving Open‐Circuit Voltage and Short‐Circuit Current Density in Tandem Organic Solar Cells , 2017, Advanced materials.

[24]  H. Yao,et al.  Fine-Tuned Photoactive and Interconnection Layers for Achieving over 13% Efficiency in a Fullerene-Free Tandem Organic Solar Cell. , 2017, Journal of the American Chemical Society.

[25]  Yun Zhang,et al.  Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells. , 2017, Journal of the American Chemical Society.

[26]  H. Yao,et al.  From Binary to Ternary: Improving the External Quantum Efficiency of Small‐Molecule Acceptor‐Based Polymer Solar Cells with a Minute Amount of Fullerene Sensitization , 2017 .

[27]  Joo-Hyun Kim,et al.  Efficient Nonfullerene Polymer Solar Cells Enabled by a Novel Wide Bandgap Small Molecular Acceptor , 2017, Advanced materials.

[28]  He Yan,et al.  A Wide-Bandgap Donor Polymer for Highly Efficient Non-fullerene Organic Solar Cells with a Small Voltage Loss. , 2017, Journal of the American Chemical Society.

[29]  M. Steigerwald,et al.  Long, Atomically Precise Donor-Acceptor Cove-Edge Nanoribbons as Electron Acceptors. , 2017, Journal of the American Chemical Society.

[30]  Fujun Zhang,et al.  Highly Efficient Parallel-Like Ternary Organic Solar Cells , 2017 .

[31]  A Novel Thiophene‐Fused Ending Group Enabling an Excellent Small Molecule Acceptor for High‐Performance Fullerene‐Free Polymer Solar Cells with 11.8% Efficiency , 2017, 1703.02896.

[32]  X. Zhan,et al.  Realizing Small Energy Loss of 0.55 eV, High Open‐Circuit Voltage >1 V and High Efficiency >10% in Fullerene‐Free Polymer Solar Cells via Energy Driver , 2017, Advanced materials.

[33]  Zhishan Bo,et al.  Exploiting Noncovalently Conformational Locking as a Design Strategy for High Performance Fused-Ring Electron Acceptor Used in Polymer Solar Cells. , 2017, Journal of the American Chemical Society.

[34]  Ke Gao,et al.  Solution-processed organic tandem solar cells with power conversion efficiencies >12% , 2016, Nature Photonics.

[35]  Q. Zhang,et al.  A New Nonfullerene Electron Acceptor with a Ladder Type Backbone for High‐Performance Organic Solar Cells , 2017, Advanced materials.

[36]  He Yan,et al.  An All‐Solution Processed Recombination Layer with Mild Post‐Treatment Enabling Efficient Homo‐Tandem Non‐fullerene Organic Solar Cells , 2017, Advanced materials.

[37]  Jianhui Hou,et al.  Ternary Polymer Solar Cells based on Two Acceptors and One Donor for Achieving 12.2% Efficiency , 2017, Advanced materials.

[38]  Jianqi Zhang,et al.  Fluorination-enabled optimal morphology leads to over 11% efficiency for inverted small-molecule organic solar cells , 2016, Nature Communications.

[39]  F. Liu,et al.  Ternary Organic Solar Cells Based on Two Compatible Nonfullerene Acceptors with Power Conversion Efficiency >10% , 2016, Advanced materials.

[40]  Chunfeng Zhang,et al.  11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor , 2016, Nature Communications.

[41]  Feng Liu,et al.  A Thieno[3,4-b]thiophene-Based Non-fullerene Electron Acceptor for High-Performance Bulk-Heterojunction Organic Solar Cells. , 2016, Journal of the American Chemical Society.

[42]  Yongfang Li,et al.  Side-Chain Isomerization on an n-type Organic Semiconductor ITIC Acceptor Makes 11.77% High Efficiency Polymer Solar Cells. , 2016, Journal of the American Chemical Society.

[43]  Yongfang Li,et al.  Non-fullerene polymer solar cells based on a selenophene-containing fused-ring acceptor with photovoltaic performance of 8.6% , 2016 .

[44]  Long Ye,et al.  Energy‐Level Modulation of Small‐Molecule Electron Acceptors to Achieve over 12% Efficiency in Polymer Solar Cells , 2016, Advanced materials.

[45]  Fujun Zhang,et al.  Alloy Acceptor: Superior Alternative to PCBM toward Efficient and Stable Organic Solar Cells , 2016, Advanced materials.

[46]  Yanming Sun,et al.  Ternary Organic Solar Cells Based on Two Highly Efficient Polymer Donors with Enhanced Power Conversion Efficiency , 2016 .

[47]  Yanming Sun,et al.  A Facile Planar Fused-Ring Electron Acceptor for As-Cast Polymer Solar Cells with 8.71% Efficiency. , 2016, Journal of the American Chemical Society.

[48]  Fujun Zhang,et al.  Versatile ternary organic solar cells: a critical review , 2016 .

[49]  H. Ade,et al.  Efficient organic solar cells processed from hydrocarbon solvents , 2016, Nature Energy.

[50]  Kilwon Cho,et al.  A Nonfullerene Small Molecule Acceptor with 3D Interlocking Geometry Enabling Efficient Organic Solar Cells , 2016, Advanced materials.

[51]  Itaru Osaka,et al.  High-efficiency polymer solar cells with small photon energy loss , 2015, Nature Communications.

[52]  B. Thompson,et al.  Structural Origins for Tunable Open‐Circuit Voltage in Ternary‐Blend Organic Solar Cells , 2015 .

[53]  Luping Yu,et al.  Recent Advances in Bulk Heterojunction Polymer Solar Cells. , 2015, Chemical reviews.

[54]  Wei You,et al.  Status and prospects for ternary organic photovoltaics , 2015, Nature Photonics.

[55]  Jianqi Zhang,et al.  Conjugated Polymer-Small Molecule Alloy Leads to High Efficient Ternary Organic Solar Cells. , 2015, Journal of the American Chemical Society.

[56]  Yuguang Ma,et al.  Photoconductive Cathode Interlayer for Highly Efficient Inverted Polymer Solar Cells. , 2015, Journal of the American Chemical Society.

[57]  Jianqi Zhang,et al.  Synergistic Effect of Polymer and Small Molecules for High‐Performance Ternary Organic Solar Cells , 2015, Advanced materials.

[58]  Daoben Zhu,et al.  An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells , 2015, Advanced materials.

[59]  Weiwei Li,et al.  Charge transfer state energy in ternary bulk-heterojunction polymer–fullerene solar cells , 2014 .

[60]  Tobin J Marks,et al.  Imide- and amide-functionalized polymer semiconductors. , 2014, Chemical reviews.

[61]  Yongfang Li,et al.  Efficient ternary blend polymer solar cells with indene-C60 bisadduct as an electron-cascade acceptor , 2014 .

[62]  Christoph J. Brabec,et al.  IR sensitization of an indene-C60 bisadduct (ICBA) in ternary organic solar cells , 2013 .

[63]  Robert A. Street,et al.  Origin of the tunable open-circuit voltage in ternary blend bulk heterojunction organic solar cells. , 2013, Journal of the American Chemical Society.

[64]  A. Hexemer,et al.  Soft x-ray scattering facility at the Advanced Light Source with real-time data processing and analysis. , 2012, The Review of scientific instruments.

[65]  W. You,et al.  Parallel-like bulk heterojunction polymer solar cells. , 2012, Journal of the American Chemical Society.

[66]  Yang Yang,et al.  Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer , 2012, Nature Photonics.

[67]  N. Greenham,et al.  Ternary photovoltaic blends incorporating an all-conjugated donor-acceptor diblock copolymer. , 2011, Nano letters.

[68]  G. Itskos,et al.  Optical Properties of Organic Semiconductor Blends with Near‐Infrared Quantum‐Dot Sensitizers for Light Harvesting Applications , 2011 .

[69]  M. Abbas,et al.  Balanced charge carrier mobilities in bulk heterojunction organic solar cells , 2011 .

[70]  B. Thompson,et al.  Efficient ternary blend bulk heterojunction solar cells with tunable open-circuit voltage. , 2011, Journal of the American Chemical Society.

[71]  Alan J. Heeger,et al.  Recombination in polymer-fullerene bulk heterojunction solar cells , 2010 .

[72]  Takahiro Nogami,et al.  Improvement of the light-harvesting efficiency in polymer/fullerene bulk heterojunction solar cells by interfacial dye modification. , 2009, ACS applied materials & interfaces.

[73]  Valentin D. Mihailetchi,et al.  Origin of the light intensity dependence of the short-circuit current of polymer/fullerene solar cells , 2005 .