Three-dimensional surface reconstruction of tree canopy from lidar point clouds using a region-based level set method

In this article, a novel method is proposed for three-dimensional (3D) canopy surface reconstruction of trees using a region-based level set method. Both individual tree crowns and clusters of trees are first marked for further exploration. Multiple horizontal slices corresponding to different heights are obtained. The 3D structure of tree canopy is built using raw data from lidar point clouds. Also, new applications are proposed based on the new method for 3D forest reconstruction. The biomass parameters of the forest, including tree intersection area, tree equivalent crown radius, and canopy volume, can be calculated from stacking 2D slices of trees. Tree types are also identified and classified. The results indicate that this approach is effective for 3D surface reconstruction of forests including individual trees and clusters of trees, and that critical forest parameters (such as tree intersection area, tree position, and canopy volume) can be derived for the evaluation and measurement of biophysical parameters of forests.

[1]  Christopher J. Crosby,et al.  Illuminating Northern California's Active Faults , 2009 .

[2]  M. Maltamo,et al.  ADAPTIVE METHODS FOR INDIVIDUAL TREE DETECTION ON AIRBORNE LASER BASED CANOPY HEIGHT MODEL , 2004 .

[3]  Mikko Inkinen,et al.  A segmentation-based method to retrieve stem volume estimates from 3-D tree height models produced by laser scanners , 2001, IEEE Trans. Geosci. Remote. Sens..

[4]  T. J. Dean,et al.  Estimating individual tree leaf area in loblolly pine plantations using LiDAR-derived measurements of height and crown dimensions , 2005 .

[5]  S. Huang,et al.  Modeling crown volume of lodgepole pine based upon the uniform stress theory , 2007 .

[6]  Geoffrey J. Hay,et al.  Development of a pit filling algorithm for LiDAR canopy height models , 2009, Comput. Geosci..

[7]  Wolfgang Lucht,et al.  Global biomass mapping for an improved understanding of the CO2 balance—the Earth observation mission Carbon-3D , 2005 .

[8]  M. Flood,et al.  LiDAR remote sensing of forest structure , 2003 .

[9]  Alex C. Lee,et al.  A LiDAR-derived canopy density model for tree stem and crown mapping in Australian forests , 2007 .

[10]  E. Næsset,et al.  Single Tree Segmentation Using Airborne Laser Scanner Data in a Structurally Heterogeneous Spruce Forest , 2006 .

[11]  Beat Koch,et al.  Development of Filtering , Segmentation and Modelling Modules for Lidar and Multispectral Data as a Fundament of an Automatic Forest Inventory System , 2004 .

[12]  Åsa Persson,et al.  Identifying species of individual trees using airborne laser scanner , 2004 .

[13]  T. Dawson,et al.  Quantifying forest above ground carbon content using LiDAR remote sensing , 2004 .

[14]  J. Holmgren,et al.  Estimation of Tree Height and Stem Volume on Plots Using Airborne Laser Scanning , 2003, Forest Science.

[15]  Emilio Chuvieco,et al.  Estimation of leaf area index and covered ground from airborne laser scanner (Lidar) in two contrasting forests , 2004 .

[16]  Ernesto Bribiesca,et al.  An easy measure of compactness for 2D and 3D shapes , 2008, Pattern Recognit..

[17]  Matti Maltamo,et al.  Airborne discrete-return LIDAR data in the estimation of vertical canopy cover, angular canopy closure and leaf area index , 2011 .

[18]  Paul L. Rosin.  Measuring shape: ellipticity, rectangularity, and triangularity , 2000, Proceedings 15th International Conference on Pattern Recognition. ICPR-2000.

[19]  B. Koch,et al.  Detection of individual tree crowns in airborne lidar data , 2006 .

[20]  N. Coops,et al.  Canopy surface reconstruction from a LiDAR point cloud using Hough transform , 2010 .

[21]  Tony F. Chan,et al.  Active contours without edges , 2001, IEEE Trans. Image Process..

[22]  E. Næsset.  Determination of mean tree height of forest stands using airborne laser scanner data , 1997 .

[23]  Bernard Chazelle,et al.  Shape distributions , 2002, TOGS.

[24]  Muhammad Zulkarnain Abdul Rahman,et al.  Tree crown delineation from high resolution airborne LiDAR based on densities of high points , 2009 .

[25]  Åsa Persson,et al.  Detecting and measuring individual trees using an airborne laser scanner , 2002 .

[26]  K. Omasa,et al.  3D lidar imaging for detecting and understanding plant responses and canopy structure. , 2006, Journal of experimental botany.

[27]  S. Popescu,et al.  A voxel-based lidar method for estimating crown base height for deciduous and pine trees , 2008 .

[28]  W. Stuetzle,et al.  Capturing tree crown formation through implicit surface reconstruction using airborne lidar data , 2009 .

[29]  Pinliang Dong,et al.  Characterization of individual tree crowns using three-dimensional shape signatures derived from LiDAR data , 2009 .

[30]  Tomas Brandtberg.  Detection and analysis of individual leaf-off tree crowns in small footprint, high sampling density lidar data from the eastern deciduous forest in North America , 2003 .

[31]  R. Nelson.  Modeling forest canopy heights: The effects of canopy shape , 1997 .

[32]  Sylvie Durrieu,et al.  TREE CROWN DELINEATION FROM DIGITAL ELEVATION MODELS AND HIGH RESOLUTION IMAGERY , 2004 .

[33]  J. Reitberger,et al.  3D segmentation of single trees exploiting full waveform LIDAR data , 2009 .

[34]  Richard G. Oderwald,et al.  Technical note: Canopy height models and airborne lasers to estimate forest biomass: Two problems , 2000 .