Laser surface modification of PEEK

Abstract Polyether-ether-ketone (PEEK) is a synthetic thermoplastic polymer with excellent mechanical and chemical properties, which make it attractive for the field of reconstructive surgery. Nevertheless, this material has a poor interfacial biocompatibility due to its large chemical stability which induces poor adhesive bonding properties. The possibilities of enhancing the PEEK adhesive properties by laser treatments have been explored in the past. This paper presents a systematic approach to discern the role of laser irradiation wavelength on the surface modification of PEEK under three laser wavelengths (λ = 1064, 532, and 355 nm) with the aim to determine the most adequate processing conditions to increase the roughness and wettability, the main parameters affecting cell adhesion characteristics of implants. Overall results show that the ultraviolet (λ = 355 nm) laser radiation is the most suitable one to enhance surface wettability of PEEK.

[1]  B D Boyan,et al.  Effect of titanium surface roughness on proliferation, differentiation, and protein synthesis of human osteoblast-like cells (MG63). , 1995, Journal of biomedical materials research.

[2]  M Degrange,et al.  Correlation between substratum roughness and wettability, cell adhesion, and cell migration. , 1997, Journal of biomedical materials research.

[3]  Andreas Hartwig,et al.  Influence of CO2 laser radiation on the surface properties of poly(ether ether ketone) , 1997 .

[4]  Ming Zhou,et al.  Superhydrophobic surfaces prepared by microstructuring of silicon using a femtosecond laser. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[5]  P. Laurens,et al.  Enhancement of the adhesive bonding properties of PEEK by excimer laser treatment , 1998 .

[6]  S. Kurtz,et al.  PEEK biomaterials in trauma, orthopedic, and spinal implants. , 2007, Biomaterials.

[7]  M. Pascual,et al.  Laser cladding of bioactive glass coatings. , 2010, Acta biomaterialia.

[8]  Xiaolong Zhu,et al.  Effects of topography and composition of titanium surface oxides on osteoblast responses. , 2004, Biomaterials.

[9]  Lourdes Díaz-Rodríguez,et al.  Effect of roughness, wettability and morphology of engineered titanium surfaces on osteoblast-like cell adhesion , 2010 .

[10]  R. Advíncula,et al.  Osteoblast adhesion and matrix mineralization on sol-gel-derived titanium oxide. , 2006, Biomaterials.

[11]  R. M. Turner,et al.  Potential of polyetheretherketone (PEEK) and carbon-fibre-reinforced PEEK in medical applications , 1987 .

[12]  P. Laurens,et al.  Characterization of modifications of polymer surfaces after excimer laser treatments below the ablation threshold , 2000 .

[13]  Claude Martelet,et al.  Relationship between surface properties (roughness, wettability) of titanium and titanium alloys and cell behaviour , 2003 .

[14]  Alexander A. Serafetinides,et al.  Ultra-short pulsed laser ablation of polymers , 2001 .

[15]  Laser-induced surface modifications of poly(ether ether ketone) : influence of the excimer laser wavelength , 1999 .

[16]  P. Cheang,et al.  In vitro apatite formation and its growth kinetics on hydroxyapatite/polyetheretherketone biocomposites. , 2005, Biomaterials.