Materials from renewable resources: new properties and functions.
暂无分享,去创建一个
[1] T. Burgo,et al. Mechanochemical transduction and hygroelectricity in periodically stretched rubber , 2019, Polymer.
[2] T. Burgo,et al. Rubber Surface Change and Static Charging under Periodic Stress , 2018, Colloids and Interfaces.
[3] L. Qu,et al. Interface-mediated hygroelectric generator with an output voltage approaching 1.5 volts , 2018, Nature Communications.
[4] Michael D. Grissom,et al. Resonant frequency tuning of electroactive polymer membranes via an applied bias voltage , 2018, Smart Materials and Structures.
[5] F. Galembeck. From Aqueous Dispersions to Functional Materials: Capillarity and Electrostatic Adhesion. , 2018, Chemical record.
[6] Yibin Fu,et al. Localized necking of a dielectric membrane , 2018 .
[7] J. Leguy. Periodate oxidation of cellulose for internal plasticization and materials design , 2018 .
[8] A. Zarbin,et al. Highly Conducting, Sustainable, Nanographitic Rubber Composites , 2018, ACS omega.
[9] C. Deneke,et al. Predicting Ligand-Free Cell Attachment on Next-Generation Cellulose–Chitosan Hydrogels , 2018, ACS omega.
[10] T. Burgo,et al. Electricity on Rubber Surfaces: A New Energy Conversion Effect , 2017, ACS omega.
[11] F. Galembeck. Synergy in food, energy and advanced materials production from biomass , 2017 .
[12] T. Burgo,et al. Graphite exfoliation in cellulose solutions. , 2017, Nanoscale.
[13] Fernando Galembeck. EVOLUÇÃO E INOVAÇÃO NO SETOR QUÍMICO BRASILEIRO: UMA VISÃO DOS ÚLTIMOS QUARENTA ANOS , 2017 .
[14] Jun Zhou,et al. Water-evaporation-induced electricity with nanostructured carbon materials. , 2017, Nature nanotechnology.
[15] M. Gonçalves,et al. Polymorphic transformation morphology of isotactic poly(1-butene)/poly(propylene-co-1-butene-co-ethylene) blends , 2017, Journal of Polymer Research.
[16] Xiaoling Jin,et al. Random response of dielectric elastomer balloon to electrical or mechanical perturbation , 2017 .
[17] G. Pollack,et al. Where is water in the triboelectric series , 2016 .
[18] Lan Jiang,et al. Highly efficient moisture-enabled electricity generation from graphene oxide frameworks , 2016 .
[19] C. Deneke,et al. Surface modified cellulose scaffolds for tissue engineering , 2015, Cellulose.
[20] C. Deneke,et al. Adhesive and Reinforcing Properties of Soluble Cellulose: A Repulpable Adhesive for Wet and Dry Cellulosic Substrates. , 2015, ACS applied materials & interfaces.
[21] Fei Zhao,et al. Direct Power Generation from a Graphene Oxide Film under Moisture , 2015, Advanced materials.
[22] T. Burgo,et al. On the spontaneous electric-bipolar nature of aerosols formed by mechanical disruption of liquids , 2015 .
[23] F. Galembeck,et al. Morphology of latex and nanocomposite adsorbents prepared by freeze-casting , 2015 .
[24] Tongqing Lu,et al. Experimental investigation of the electromechanical phase transition in a dielectric elastomer tube , 2015 .
[25] Giovanni Berselli,et al. Design of a Dielectric Elastomer Cylindrical Actuator With Quasi-Constant Available Thrust: Modeling Procedure and Experimental Validation , 2014 .
[26] Fernando Galembeck,et al. Friction, tribochemistry and triboelectricity: recent progress and perspectives , 2014 .
[27] F. Galembeck,et al. Triboelectricity in insulating polymers: evidence for a mechanochemical mechanism. , 2014, Faraday discussions.
[28] Fernando Galembeck,et al. Multifunctional and environmentally friendly nanocomposites between natural rubber and graphene or graphene oxide , 2014 .
[29] T. Burgo,et al. Corona charging and potential decay on oxidized polyethylene surfaces , 2014 .
[30] Wanlin Guo,et al. Waving potential in graphene , 2014, Nature Communications.
[31] Wanlin Guo,et al. Generating electricity by moving a droplet of ionic liquid along graphene. , 2014, Nature nanotechnology.
[32] T. Burgo,et al. Friction coefficient dependence on electrostatic tribocharging , 2013, Scientific Reports.
[33] C. A. R. Costa,et al. Microscopia de sondas: uma caixa de ferramentas da nanotecnologia , 2013 .
[34] J. M. Soares,et al. Size selected synthesis of magnetite nanoparticles in chitosan matrix , 2013 .
[35] L. Kubota,et al. One-step synthesis of polymer core-shell particles with a carboxylated ruthenium complex: a potential tool for biomedical applications. , 2013, Journal of materials chemistry. B.
[36] Xueming Zhang,et al. Fabrication of Cellulose Film with Enhanced Mechanical Properties in Ionic Liquid 1-Allyl-3-methylimidaxolium Chloride (AmimCl) , 2013, Materials.
[37] G. Ruggeri,et al. Metal nanostructures with magnetic and biodegradable properties for medical applications , 2013 .
[38] A. Romano,et al. Cellulose dissolution in an alkali based solvent: influence of additives and pretreatments , 2013 .
[39] J. Bernardes,et al. Corona-treated polyethylene films are macroscopic charge bilayers. , 2013, Langmuir : the ACS journal of surfaces and colloids.
[40] R. F. Gouveia,et al. Acid-base site detection and mapping on solid surfaces by Kelvin force microscopy (KFM). , 2012, Analytical chemistry.
[41] T. Burgo,et al. Tribocharged Polymer Surfaces: Solvent Effect on Pattern Formation and Modification , 2012 .
[42] Kwangwon Kim,et al. Flexible cellular solid spokes of a non-pneumatic tire , 2012 .
[43] Fernando Galembeck,et al. Triboelectricity: macroscopic charge patterns formed by self-arraying ions on polymer surfaces. , 2012, Langmuir : the ACS journal of surfaces and colloids.
[44] F. Galembeck,et al. Electrostatic Interactions: An Effective Mechanism for Rubber Adhesion and Blending , 2012 .
[45] A. Romano,et al. Rationalizing cellulose (in)solubility: reviewing basic physicochemical aspects and role of hydrophobic interactions , 2012, Cellulose.
[46] L. Santos,et al. Water with Excess Electric Charge , 2011 .
[47] G. Karlström,et al. On the mechanism of dissolution of cellulose , 2010 .
[48] Fernando Galembeck,et al. Charge partitioning at gas-solid interfaces: humidity causes electricity buildup on metals. , 2010, Langmuir : the ACS journal of surfaces and colloids.
[49] E. Frollini,et al. Characterization of banana, sugarcane bagasse and sponge gourd fibers of Brazil , 2009 .
[50] Markus Pauly,et al. Cell-wall carbohydrates and their modification as a resource for biofuels. , 2008, The Plant journal : for cell and molecular biology.
[51] L. B. Schein,et al. Recent Progress and Continuing Puzzles in Electrostatics , 2007, Science.
[52] F. Galembeck,et al. Counterion Effect on the Morphological and Mechanical Properties of Polymer−Clay Nanocomposites Prepared in an Aqueous Medium , 2007 .
[53] Lay-Theng Lee,et al. Skim and cream natural rubber particles: colloidal properties, coalescence and film formation. , 2003, Journal of colloid and interface science.
[54] P. Struik,et al. Agronomy of fibre hemp (Cannabis sativa L.) in Europe. , 2000 .
[55] Thomas J. Pinnavaia,et al. Clay-Polymer Nanocomposites Formed from Acidic Derivatives of Montmorillonite and an Epoxy Resin , 1994 .
[56] P. Messersmith,et al. Polymer-layered silicate nanocomposites: in situ intercalative polymerization of .epsilon.-caprolactone in layered silicates , 1993 .
[57] P. E. Hurley. History of Natural Rubber , 1981 .
[58] C. Norman. A thought for food , 1975, Nature.
[59] Fernando Galembeck,et al. Perspectives for Biomass Production and Use in Brazil , 2017 .
[60] A. J. G. Zarbin. Nanocompósitos Multifuncionais de Látex de Borracha Natural e Nanoestruturas de Carbono , 2017 .
[61] C. Arndt,et al. Fueling the path to food security , 2016 .
[62] T. Burgo,et al. Electrified Water: Liquid, Vapor and Aerosol , 2015 .
[63] Y. An,et al. Bovine osteoblasts cultured on polyanionic collagen scaffolds: an ultrastructural and immunocytochemical study. , 2013, Journal of biomedical materials research. Part B, Applied biomaterials.
[64] F. Galembeck,et al. Nanostructures and Adhesion in Natural Rubber: New Era for a Classic , 2009 .
[65] Forest Products Statistics , 1958, Nature.