Microwave plasma and rapid thermal processing of indium-tin oxide thin films for enhancing their performance as transparent electrodes

Abstract. Indium-tin oxide (ITO) is widely used as a transparent electrode for optoelectronic devices given its large transparency and high conductivity. However, the particular properties of this material greatly depend on the overall fabrication process. We report on the effect of four different postfabrication processes on ITO thin films grown by electron beam evaporation. More specifically, the effect on the overall properties of the evaporated ITO thin films of microwave plasma annealing, rapid thermal processing, and the two processes combined were analyzed. In particular, the morphological, chemical, optical, and electrical properties of the annealed ITO thin films were studied. The experimental results show that the ITO thin films can be turned from opaque to transparent, and their conductivity can be improved by one order of magnitude depending on the particular postfabrication process.

[1]  Xiaoping Liu,et al.  Preparation and characteristics of indium tin oxide (ITO) thin films at low temperature by r.f. magnetron sputtering , 2006 .

[2]  Terry Alford,et al.  Characterization of the physical and electrical properties of Indium tin oxide on polyethylene napthalate , 2005 .

[3]  K. Fleischer,et al.  Quantifying the Performance of P-Type Transparent Conducting Oxides by Experimental Methods , 2017, Materials.

[4]  C. Koo,et al.  Low-temperature soluble InZnO thin film transistors by microwave annealing , 2011 .

[5]  Michael D. Abràmoff,et al.  Image processing with ImageJ , 2004 .

[6]  R. Uecker,et al.  Coloration and oxygen vacancies in wide band gap oxide semiconductors: Absorption at metallic nanoparticles induced by vacancy clustering—A case study on indium oxide , 2014 .

[7]  Masahiro Hirata,et al.  Influence of Preferred Orientation on the Electrical Conductivity of Fluorine-Doped Tin Oxide Films , 2014, Scientific Reports.

[8]  D. Raoufi,et al.  The effect of substrate temperature on the microstructural, electrical and optical properties of Sn-doped indium oxide thin films , 2015 .

[9]  Jooho Moon,et al.  Inkjet-printing of indium tin oxide (ITO) films for transparent conducting electrodes , 2011 .

[10]  J. M. Martínez-Duart,et al.  Optical constants of porous silicon films and multilayers determined by genetic algorithms , 2004 .

[11]  E. Rudnik,et al.  Hydrometallurgical methods of indium recovery from obsolete LCD and LED panels , 2016 .

[12]  F. Sanz,et al.  Study and improvement of aluminium doped ZnO thin films: Limits and advantages , 2013 .

[13]  Yao-Jen Lee,et al.  Low-Temperature Microwave Annealing Processes for Future IC Fabrication—A Review , 2014, IEEE Transactions on Electron Devices.

[14]  J. Tauc,et al.  Optical properties and electronic structure of amorphous Ge and Si , 1968 .

[15]  H. Nomura,et al.  Characteristics of indium tin oxide thin films prepared using electron beam evaporation , 2004 .

[16]  A. L. Patterson.  The Scherrer Formula for X-Ray Particle Size Determination , 1939 .

[17]  Tingting Tan,et al.  Annealing Effects on Structural, Optical Properties and Laser-Induced Damage Threshold of MgF2 Thin Films , 2017, Acta Metallurgica Sinica (English Letters).

[18]  Y. Jung,et al.  Influence of DC magnetron sputtering parameters on the properties of amorphous indium zinc oxide thin film , 2003 .

[19]  M. Zakria,et al.  Optical spectroscopic analysis of annealed Cd1−xZnxSe thin films deposited by close space sublimation technique , 2016 .

[20]  V. Bulović,et al.  Doped graphene electrodes for organic solar cells , 2010, Nanotechnology.

[21]  A. Zunger,et al.  Dopability, intrinsic conductivity, and nonstoichiometry of transparent conducting oxides. , 2007, Physical review letters.

[22]  C. Sanjeeviraja,et al.  Structural and optical properties of indium tin oxide (ITO) thin films with different compositions prepared by electron beam evaporation , 2010 .

[23]  J. Han,et al.  Preparation of ITO Thin Film by Using DC Magnetron Sputtering , 2008 .

[24]  J. Frenkel.  On the Electrical Resistance of Contacts between Solid Conductors , 1930 .

[25]  D. Das,et al.  Melting point of Sn as the optimal growth temperature in realizing the favored transparent conducting properties of In2O3:Sn films , 2018, Journal of Alloys and Compounds.

[26]  M. Higuchi,et al.  Synthesis of Metallo-Supramolecular Polymers with Bis-NNN-Tridentate Ligand for Electrochromic Devices , 2015 .

[27]  J. Venkatesan,et al.  Effect of Temperature on Isolation and Characterization of Hydroxyapatite from Tuna (Thunnus obesus) Bone , 2010, Materials.

[28]  K. Raju,et al.  Optical parameters induced by phase transformation in RF magnetron sputtered TiO2 nanostructured thin films , 2014 .

[29]  Mehdi Askari,et al.  Electrical and optical properties of ITO thin films prepared by DC magnetron sputtering for low-emitting coatings , 2014 .

[30]  A. Kabashin,et al.  Particle-free inkjet printing of nanostructured porous indium tin oxide thin films , 2013 .

[31]  Chongwu Zhou,et al.  Review of chemical vapor deposition of graphene and related applications. , 2013, Accounts of chemical research.

[32]  David-Wei Zhang,et al.  Understanding the microwave annealing of silicon , 2017 .

[33]  Paolo Bettotti,et al.  Hybrid Materials for Integrated Photonics , 2014 .

[34]  M. Ynsa,et al.  Microwave plasma annealing of sol-gel deposited tantalum oxide and zinc oxide films , 2018 .

[35]  Pulsed laser deposition of ITO/AZO transparent contact layers for GaN LED applications. , 2011, Optics express.

[36]  S. Jit,et al.  Effects of Annealing Temperature on the Structural, Optical, and Electrical Properties of ZnO Thin Films Grown on n-Si〈100〉 Substrates by the Sol–Gel Spin Coating Method , 2014, Acta Metallurgica Sinica (English Letters).

[37]  A. Shen,et al.  Fabrication of conducting polyaniline microspheres using droplet microfluidics , 2013 .

[38]  Alberto Piqué,et al.  Effect of film thickness on the properties of indium tin oxide thin films , 2000 .

[39]  A. Ashour,et al.  Physical properties of ZnO thin films deposited by spray pyrolysis technique , 2006 .

[40]  K. Kim,et al.  Preparation of ITO and IZO thin films by using Facing Target Sputtering (FTS) method , 2009 .