A 2-DOF active complaint gripper for robotic applications

Abstract This paper describes the construction, control and test results of a planar active compliant gripper. The compliance is provided by manipulating the part, held by the gripper fingers, in response to external forces exerted on the part during the process. The gripper consists of two parallel fingers, driven separately by DC motors, mounted on a translation stage perpendicular to their axis of motion. This configuration enables grasping an object and manipulating it in X-Y plane. The gripper is instrumented with force sensors capable of sensing the grasping force and the external forces exerted on the object. These force readings, in conjunction with a predetermined policy (dictated by the task to be performed) are used by a controller to manipulate the part. The gripper can be used for tasks such as insertion, edge following, task geometry tuning, etc. As an example, single peg/hole insertion experiments were conducted, and the results were compared with those obtained with a passive RCC.

[1]  Thomas C. Henderson,et al.  A servo-controlled robot gripper with multiple sensors and its logical specification , 1986, J. Field Robotics.

[2]  Ralph L. Hollis.  A planar XY robotic fine positioning device , 1985, Proceedings. 1985 IEEE International Conference on Robotics and Automation.

[3]  Yoram Koren,et al.  Cross-Coupled Biaxial Computer Control for Manufacturing Systems , 1980 .

[4]  Kensuke Hasegawa,et al.  A design approach to total sensory robot control , 1982 .

[5]  Daniel E. Whitney,et al.  Computer-controlled Assembly , 1978 .

[6]  John J. Craig,et al.  Hybrid position/force control of manipulators , 1981 .

[7]  Tamio Arai,et al.  The part mating forces that arise when using a worktable with compliance , 1981 .

[8]  Benjamin C. Kuo,et al.  Digital Control Systems , 1977 .

[9]  Richard Paul,et al.  Manipulator compliance based on joint torque control , 1980, 1980 19th IEEE Conference on Decision and Control including the Symposium on Adaptive Processes.

[10]  Daniel E. Whitney,et al.  Force Feedback Control of Manipulator Fine Motions , 1977 .

[11]  J. Salisbury,et al.  Active stiffness control of a manipulator in cartesian coordinates , 1980, 1980 19th IEEE Conference on Decision and Control including the Symposium on Adaptive Processes.

[12]  Daniel E. Whitney,et al.  Quasi-Static Assembly of Compliantly Supported Rigid Parts , 1982 .

[13]  C. Y. Ho.  Study of precision and calibration for IBM RS‐1 robot system , 1982 .

[14]  Gregory P. Starr,et al.  Edge-following with a PUMA 560 manipulator using VAL-II , 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

[15]  Gene F. Franklin,et al.  Digital control of dynamic systems , 1980 .