On the correlation between droplet volume and irradiation conditions in the laser forward transfer of liquids

The analysis of the morphology of droplets printed through laser-induced forward transfer (LIFT) of liquid films shows that: (i) the droplet volume is linearly related with the energy of the laser pulse that originated it, (ii) the liquid ejection process is activated by an energy density threshold F0, and (iii) the droplet volume can be correlated with a dimensional parameter of the laser beam through an oversimple model that states that the amount of printed liquid equals the liquid contained in the cylindrical portion of an irradiated film whose base corresponds to the cross-sectional area of the beam with energy density higher than F0. Although these issues seem to describe correctly the LIFT process, some problematic instances arise from them. Thus, the linear relation between droplet volume and laser pulse energy seems to be inconsistent with the existence of the threshold F0. On the other hand, the compatibility between the model and the aforementioned linear relation requires to be explained. Finally, the model is based on the idea that transfer takes place in a way analogous to the LIFT of solid films, but time-resolved imaging studies have demonstrated that liquid ejection follows a dynamics which seems quite unsuited with that idea. In this work previous results are re-analyzed and new experiments are performed in an attempt to clarify these questions. It is then shown that the inconsistencies pointed out are only apparent, and that the validity of the model is limited to irradiation conditions where the beam dimensions are significantly larger than the thickness of the liquid film. Furthermore, an explanation is provided for the dependence of the success and failure of the model on those irradiation conditions in terms of the diverse liquid ejection dynamics taking place.

[1]  U. Parlitz,et al.  Shock wave emission and cavitation bubble generation by picosecond and nanosecond optical breakdown in water , 1996 .

[2]  B. W. Siryj,et al.  Material transfer recording. , 1970, Applied optics.

[3]  Alberto Piqué,et al.  Laser Direct-Write Techniques for Printing of Complex Materials , 2007 .

[4]  Ludovic Rapp,et al.  Pulsed-laser printing of silver nanoparticles ink: control of morphological properties. , 2011, Optics express.

[5]  A. Vogel,et al.  Stress wave emission and cavitation bubble dynamics by nanosecond optical breakdown in a tissue phantom , 2006, Journal of Fluid Mechanics.

[6]  J. M. Fernández-Pradas,et al.  Printing biological solutions through laser-induced forward transfer , 2008 .

[7]  Juergen Koch,et al.  Time-resolved imaging of hydrogel printing via laser-induced forward transfer , 2011 .

[8]  M. Duocastella,et al.  Sessile droplet formation in the laser-induced forward transfer of liquids: A time-resolved imaging study , 2010 .

[9]  Alberto Piqué,et al.  Laser forward transfer of silver electrodes for organic thin-film transistors , 2009 .

[10]  Costas Fotakis,et al.  Patterning parameters for biomolecules microarrays constructed with nanosecond and femtosecond UV lasers , 2008 .

[11]  Boris N. Chichkov,et al.  Laser-induced jet formation and droplet ejection from thin metal films , 2012 .

[12]  Ron Weiss,et al.  Thick film laser induced forward transfer for deposition of thermally and mechanically sensitive materials , 2007 .

[13]  Claudia Unger,et al.  Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprinting , 2011, Biomedical engineering online.

[14]  Bradley R Ringeisen,et al.  Jet‐based methods to print living cells , 2006, Biotechnology journal.

[15]  J. M. Fernández-Pradas,et al.  Time-resolved imaging of the laser forward transfer of liquids , 2009 .

[16]  Pere Serra,et al.  Droplet printing through bubble contact in the laser forward transfer of liquids , 2011 .

[17]  Philippe Delaporte,et al.  Pulsed-laser printing of organic thin-film transistors , 2009 .

[18]  A Ranella,et al.  Quantification of the activity of biomolecules in microarrays obtained by direct laser transfer , 2008, Biomedical microdevices.

[19]  J. M. Fernández-Pradas,et al.  Jet formation in the laser forward transfer of liquids , 2008 .

[20]  P. Serra,et al.  Liquids microprinting through laser-induced forward transfer , 2009 .

[21]  J. M. Fernández-Pradas,et al.  Preparation of functional DNA microarrays through laser-induced forward transfer , 2004 .

[22]  Scott A. Mathews,et al.  Laser Direct-Write of Metallic Nanoparticle Inks , 2007 .

[23]  S. R. Otto,et al.  Bubble interactions near a free surface , 2004 .

[24]  E. Mazur,et al.  Dynamics of femtosecond laser-induced breakdown in water from femtoseconds to microseconds. , 2002, Optics express.

[25]  Alberto Piqué,et al.  Optimization of laser printing of nanoparticle suspensions for microelectronic applications , 2012 .

[26]  J. M. Fernández-Pradas,et al.  Study of the laser-induced forward transfer of liquids for laser bioprinting , 2007 .

[27]  F. J. Adrian,et al.  Metal deposition from a supported metal film using an excimer laser , 1986 .

[28]  Ioanna Zergioti,et al.  Liquid phase direct laser printing of polymers for chemical sensing applications , 2008 .

[29]  J. M. Fernández-Pradas,et al.  Laser-induced forward transfer of liquids: Study of the droplet ejection process , 2006 .

[30]  V. Dinca,et al.  Study of liquid deposition during laser printing of liquids , 2011 .

[31]  M. Colina,et al.  DNA deposition through laser induced forward transfer. , 2005, Biosensors & bioelectronics.

[32]  Zsolt Bor,et al.  Survival and proliferative ability of various living cell types after laser-induced forward transfer. , 2005, Tissue engineering.

[33]  Maria Dinescu,et al.  Liposome micropatterning based on laser-induced forward transfer , 2011 .