Genetic Algorithm Optimization of a High-Pressure Turbine Vane Pressure Side Film Cooling Array

[1]  George S. Dulikravich,et al.  Optimization of a Large Number of Coolant Passages Located Close to the Surface of a Turbine Blade , 2003 .

[2]  S. Nadarajah,et al.  Adjoint-Based Multidisciplinary Design Optimization of Cooled Gas Turbine Blades , 2011 .

[3]  Three-Dimensional Film-Cooled Vane CFD Simulations and Preliminary Comparison to Experiments , 2011 .

[4]  Kwang-Yong Kim,et al.  Shape Optimization of a Laidback Fan-Shaped Film-Cooling Hole to Enhance Cooling Performance , 2010 .

[5]  Petros Koumoutsakos,et al.  Evolution strategies for film cooling optimization , 2001 .

[6]  John P. Clark,et al.  Low-Heat-Load-Vane Profile Optimization, Part 1: Code Validation and Airfoil Redesign , 2008 .

[7]  John P. Clark,et al.  Design Optimization Methods for Improving HPT Vane Pressure Side Cooling Properties Using Genetic Algorithms and Efficient CFD , 2012 .

[8]  Aditi Chattopadhyay,et al.  Multidisciplinary Design Optimization Procedure for Improved Design of a Cooled Gas Turbine Blade , 2002 .

[9]  Karen A. Thole,et al.  Gas Turbine Film Cooling , 2006 .

[10]  Li He,et al.  Validation of the Immersed Mesh Block (IMB) Approach Against a Cooled Transonic Turbine Stage , 2012 .

[11]  Aditi Chattopadhyay,et al.  Application of design optimization to turbomachinery design , 2002 .

[12]  Richard J. Anthony,et al.  Flexible Non-Intrusive Heat Flux Instrumentation for the AFRL Research Turbine , 2011 .

[13]  Ch. Hirsch,et al.  Modelling of Film Cooling for Turbine Blade Design , 2008 .

[14]  K. Funazaki,et al.  APPLICATION OF GENETIC ALGORITHMS TO DESIGN OF AN INTERNAL TURBINE COOLING SYSTEM , 2003 .

[15]  Kwang-Yong Kim,et al.  Numerical Analysis of Film-Cooling Performance and Optimization for a Novel Shaped Film-Cooling Hole , 2012 .