Installation and commissioning of the silicon pore optics coating facility for the ATHENA mission

We present the latest progress on the industrial scale coating facility for the Advanced Telescope for High-ENergy Astrophysics (ATHENA) mission. The facility has been successfully commissioned and tested, completing an important milestone in preparation of the Silicon Pore Optics (SPO) production capability. We qualified the coating facility by depositing iridium and boron carbide thin films in different configurations under various process conditions including pre-coating in-system plasma cleaning. The thin films were characterized with X-Ray Reectometry (XRR) using laboratory X-ray sources Cu K-α at 8.048 keV and PTB's four-crystal monochromator beamline at the synchrotron radiation facility BESSY II in the energy range from 3.6 keV to 10.0 keV. Additional X-ray Photoelectron Spectroscopy (XPS) measurements were performed with Al K-α radiation to analyze the composition of the deposited thin films.

[1]  Finn Erland Christensen,et al.  Development and characterization of coatings on silicon pore optics substrates for the ATHENA Mission , 2012, Other Conferences.

[2]  K. Perez.  Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment , 2014 .

[3]  Niels J. Westergaard,et al.  Coating optimization for the ATHENA+ mission , 2013, Optics & Photonics - Optical Engineering + Applications.

[4]  Marcos Bavdaz,et al.  Performance and stability of mirror coatings for the ATHENA mission , 2018, Astronomical Telescopes + Instrumentation.

[5]  Finn E. Christensen,et al.  Preliminary coating design and coating developments for ATHENA , 2011, Optical Engineering + Applications.

[6]  Marcos Bavdaz,et al.  Silicon pore optics mirror module production and testing , 2018, Astronomical Telescopes + Instrumentation.

[7]  Michael Krumrey,et al.  High-accuracy detector calibration at the PTB four-crystal monochromator beamline , 2001 .

[8]  Finn Erland Christensen,et al.  LEXR: A low-energy X-ray reflectometer for characterization of ATHENA mirror coatings , 2019, Optics for EUV, X-Ray, and Gamma-Ray Astronomy IX.

[9]  Finn Erland Christensen,et al.  Industrialization of the mirror plate coatings for the ATHENA mission , 2017, Optical Engineering + Applications.

[10]  Finn E. Christensen,et al.  X-ray mirror development and testing for the ATHENA mission , 2016, Astronomical Telescopes + Instrumentation.

[11]  F. E. Christensen,et al.  Development and production of a multilayer-coated x-ray reflecting stack for the Athena mission , 2016, Astronomical Telescopes + Instrumentation.

[12]  Michael J. Brett,et al.  Titanium sputter deposition at low pressures and long throw distances , 1996 .

[13]  Carsten P. Jensen,et al.  Collimated Magnetron Sputter Deposition for Mirror Coatings , 2008 .

[14]  Marcos Bavdaz,et al.  Design, development, and performance of x-ray mirror coatings for the ATHENA mission , 2017, Optical Engineering + Applications.

[15]  Finn E. Christensen,et al.  Performance and time stability of Ir/SiC X-ray mirror coatings for ATHENA , 2019, Optics for EUV, X-Ray, and Gamma-Ray Astronomy IX.