Quantifying the Effect of Separator Thickness on Rate Performance in Lithium-Ion Batteries

In addition to improving parameters such as energy density and stability, it is important to maximise rate performance in lithium-ion batteries. While much work has focused on rate-limiting factors associated with the electrodes, much less attention has been paid to the effect of the separator on rate-performance. Here we perform a quantitative study on the effect of separator thickness on the rate-performance of a model system of NMC-based half cells. By fitting experimental capacity versus rate curves, we measured the characteristic time associated with charge/discharge as a function of separator thickness, finding a roughly linear increase for separator thicknesses below ~65 μm. This behaviour is consistent with a simple physical model which shows the separator thickness dependence to be dominated by electrolyte resistance effects. The predictions of the model match the data extremely well with no adjustable parameters.

[1]  S. Lanceros‐Méndez,et al.  Cellulose and its derivatives for lithium ion battery separators: A review on the processing methods and properties , 2020 .

[2]  J. Coleman,et al.  Quantifying the Dependence of Battery Rate Performance on Electrode Thickness , 2020, ACS Applied Energy Materials.

[3]  C. Jo,et al.  A Review of Functional Separators for Lithium Metal Battery Applications , 2020, Materials.

[4]  Yanguang Li,et al.  Liquid phase exfoliation of GeS nanosheets in ambient conditions for lithium ion battery applications , 2020, 2D Materials.

[5]  Ruiyuan Tian,et al.  Developing models to fit capacity–rate data in battery systems , 2019, Current Opinion in Electrochemistry.

[6]  J. Coleman,et al.  Quantifying the Effect of Electronic Conductivity on the Rate Performance of Nanocomposite Battery Electrodes , 2019, ACS Applied Energy Materials.

[7]  J. Coleman,et al.  Using Chronoamperometry to Rapidly Measure and Quantitatively Analyse Rate-Performance in Battery Electrodes , 2019, ECS Meeting Abstracts.

[8]  S. Lanceros‐Méndez,et al.  Recent advances on separator membranes for lithium-ion battery applications: From porous membranes to solid electrolytes , 2019, Energy Storage Materials.

[9]  J. Coleman,et al.  High areal capacity battery electrodes enabled by segregated nanotube networks , 2019, Nature Energy.

[10]  J. Coleman,et al.  Solvent exfoliation stabilizes TiS2 nanosheets against oxidation, facilitating lithium storage applications. , 2019, Nanoscale.

[11]  João Coelho,et al.  Quantifying the factors limiting rate performance in battery electrodes , 2018, Nature Communications.

[12]  V. Wood,et al.  Characterization and performance evaluation of lithium-ion battery separators , 2018, Nature Energy.

[13]  Andrew M. Colclasure,et al.  Resolving the discrepancy in tortuosity factor estimation for Li-Ion battery electrodes through micro-macro modeling and experiment , 2018 .

[14]  C. Heubner,et al.  Comparison of chronoamperometric response and rate-performance of porous insertion electrodes: Towards an accelerated rate capability test , 2018, Journal of Power Sources.

[15]  N. Koratkar,et al.  Ultrathin and Strong Electrospun Porous Fiber Separator , 2018, ACS Applied Energy Materials.

[16]  Marie Francine Lagadec,et al.  Topological and Network Analysis of Lithium Ion Battery Components: The Importance of Pore Space Connectivity for Cell Operation , 2018, 1806.00083.

[17]  K. Gering,et al.  A Study of the Physical Properties of Li-Ion Battery Electrolytes Containing Esters , 2018 .

[18]  K. Edström,et al.  Thickness difference induced pore structure variations in cellulosic separators for lithium-ion batteries , 2017, Cellulose.

[19]  W. Wall,et al.  Determination of Transport Parameters in Liquid Binary Lithium Ion Battery Electrolytes I. Diffusion Coefficient , 2017 .

[20]  Hee‐Tak Kim,et al.  Electro-Spun Poly(vinylidene fluoride) Nanofiber Web as Separator for Lithium Ion Batteries: Effect of Pore Structure and Thickness. , 2016, Journal of nanoscience and nanotechnology.

[21]  Senentxu Lanceros-Méndez,et al.  Modeling separator membranes physical characteristics for optimized lithium ion battery performance , 2015 .

[22]  Martin Ebner,et al.  Validity of the Bruggeman relation for porous electrodes , 2013 .

[23]  S. Lanceros‐Méndez,et al.  Battery separators based on vinylidene fluoride (VDF) polymers and copolymers for lithium ion battery applications , 2013 .

[24]  Craig B. Arnold,et al.  Ion transport restriction in mechanically strained separator membranes , 2013 .

[25]  Jeffrey W. Fergus,et al.  Recent developments in cathode materials for lithium ion batteries , 2010 .

[26]  K. Zaghib,et al.  Quantifying tortuosity in porous Li-ion battery materials , 2009 .

[27]  Sébastien Martinet,et al.  Macroporous poly(vinylidene fluoride) membrane as a separator for lithium-ion batteries with high charge rate capacity , 2009 .

[28]  Sébastien Martinet,et al.  Lithium-ion batteries with high charge rate capacity: Influence of the porous separator , 2007 .

[29]  M. Whittingham,et al.  Lithium batteries and cathode materials. , 2004, Chemical reviews.

[30]  Pankaj Arora,et al.  Battery separators. , 2004, Chemical reviews.

[31]  J. Paulsen,et al.  Numerical simulation of porous networks in relation to battery electrodes and separators , 2003 .

[32]  M. Doyle,et al.  Simulation and Optimization of the Dual Lithium Ion Insertion Cell , 1994 .

[33]  K. Abraham.  Directions in secondary lithium battery research and development , 1993 .