Singularity analysis of three-legged, six-DOF platform manipulators with URS legs

A special class of platform manipulators is the subject of this paper. These manipulators comprise two platforms connected by three legs, each being composed of one universal (U), one revolute (R) and one spherical (S) joints, which gives the manipulator six degrees of freedom. Hence, two actuators are required per leg. Under the assumption that the two R joints proximal to the fixed platform, and making up the U-joint, are actuated, we derive the differential kinematic relations between actuator joint rates and mobile-platform twist. This model comprises two Jacobian matrices, the forward- and inverse-kinematics Jacobians. These relations are then applied to the singularity analysis of the parallel manipulator developed at Singapore Institute of Manufacturing Technology and Nanyang Technological University.

[1]  Vijay Kumar,et al.  Instantaneous Kinematics of Parallel-Chain Robotic Mechanisms , 1992 .

[2]  Leila Notash,et al.  Forward displacement analysis and uncertainty configurations of parallel manipulators with a redundant branch , 1996 .

[3]  Curtis L. Collins,et al.  On the duality of twist/wrench distributions in serial and parallel chain robot manipulators , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[4]  Frank Chongwoo Park,et al.  Manipulability and singularity analysis of multiple robot systems: a geometric approach , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[5]  H. Lipkin,et al.  Characteristic tetrahedron of wrench singularities for parallel manipulators with three legs , 2002 .

[6]  Manfred Husty,et al.  Kinematik und Robotik , 1997 .

[7]  Jorge Angeles,et al.  Architecture singularities of platform manipulators , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[8]  Clément Gosselin,et al.  Singularity analysis of closed-loop kinematic chains , 1990, IEEE Trans. Robotics Autom..

[9]  Beno Benhabib,et al.  Singularity analysis of mechanisms and robots via a motion-space model of the instantaneous kinematics , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[10]  F. Park,et al.  Singularity Analysis of Closed Kinematic Chains , 1999 .

[11]  J. Angeles,et al.  Kinematic Isotropy and the Conditioning Index of Serial Robotic Manipulators , 1992 .

[12]  Jorge Angeles,et al.  On Twist and Wrench Generators and Annihilators , 1994 .

[13]  Michael T. Heath,et al.  Scientific Computing: An Introductory Survey , 1996 .

[14]  K. H. Hunt,et al.  Kinematic geometry of mechanisms , 1978 .

[15]  Guilin Yang,et al.  Design and kinematic analysis of modular reconfigurable parallel robots , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[16]  Wankyun Chung,et al.  Analytic singularity equation and analysis of six-DOF parallel manipulators using local structurization method , 1999, IEEE Trans. Robotics Autom..

[17]  Alain Jutard,et al.  Evaluation of exploration strategies in robotic assembly , 1994 .

[18]  Jean-Pierre Merlet,et al.  Parallel Robots , 2000 .

[19]  D. Kohli,et al.  Direct Differential Kinematics of Hybrid-Chain Manipulators Including Singularity and Stability Analyses , 1994 .

[20]  Jean-Pierre Merlet.  Singular Configurations of Parallel Manipulators and Grassmann Geometry , 1989, Int. J. Robotics Res..