Coupler dynamic performance analysis of heavy haul locomotives

In this paper, a train dynamic model was developed to study the dynamic performance of heavy haul locomotives, taking into account the use of different coupler and buffer systems under conditions of severe longitudinal coupler compressive forces. The model consists of four locomotives each having 38 independent degrees of freedom and one dummy freight vehicle connected to each other by couplers and buffers. Simulation results showed that the longitudinal coupler compressive forces withstood by large rotation angle couplers with coupler shoulders were larger than those withstood by small rotation angle couplers. The results obtained for the large rotation angle coupler model showed that it had higher safety curve negotiation speeds. Due to the smaller static impedance, it was found that large capacity elastic clay (or cement) buffers cannot satisfy the requirement of heavy haul locomotives during cycle braking in long heavy downgraded tracks; the use of friction clay buffers can solve this problem.

[1]  Federico Cheli,et al.  Numerical and experimental approach for the evaluation of severe longitudinal dynamics of heavy freight trains , 2007 .

[2]  Mohammad Durali,et al.  Nonlinear Analysis of Train Derailment in Severe Braking , 2003 .

[3]  Colin Cole,et al.  Heavy haul coal train dynamics simulation comparisons of the COALlink and Central Queensland systems , 2001 .

[4]  Colin Cole,et al.  Simulated comparisons of wagon coupler systems in heavy haul trains , 2006 .

[5]  Majid Pouranvari,et al.  Failure Analysis of Automatic Coupler SA-3 in Railway Carriages , 2007 .

[6]  Liu Ling.  Failure and Treatment Measure of HX_D2 Locomotive′s Big Capacity Buffer with Coupler , 2009 .

[7]  Li Rui-chun.  Research on High-speed Train and Raising Speed Train Vehicle Hook Buffer Mechanism , 2004 .

[8]  Luca Pugi,et al.  Modelling the longitudinal dynamics of long freight trains during the braking phase , 2006 .

[9]  Paul Curcio,et al.  Ore-car coupler performance at BHP-Billiton Iron Ore , 2004 .

[10]  Colin Cole,et al.  Simulation of curving at low speed under high traction for passive steering hauling locomotives , 2008 .

[11]  Zhao Xin.  Optimal Analysis of the Hysteretic Characteristic Curve for Draft Gear Based on Response Surface Method , 2007 .

[12]  Simon Iwnicki,et al.  Handbook of railway vehicle dynamics , 2006 .

[13]  Song Rong-rong.  Study on the Coupler Stability of Locomotive SS_(3B) Running on the Long Heavy Down Grade , 2010 .

[14]  V. E. Kahle.  Failure analysis of three reconditioned rail car couplers , 2006 .

[15]  Thomas Geike.  Understanding high coupler forces at metro vehicles , 2007 .