Damage tolerance of carbon/flax hybrid composites subjected to low velocity impact

Abstract Hybrid laminates produced using carbon (C) and flax (F) fibre epoxy prepregs were fabricated with two different stacking sequences based on the presence of flax fibre laminates as outer layers and carbon as inner layers (FCF) or vice versa (CFC). Pure flax and pure carbon fibre reinforced laminates were also fabricated as a reference. Experimental tests were performed, which included four-point bending, falling weight impact tests at energies ranging from 5 to 30 J with determination of the barely visible impact damage (BVID) and post-impact flexural tests. As a whole, CFC proved slightly superior to FCF as for flexural performance, although the presence of flax laminates on the outside guaranteed a higher impact damage tolerance, acting as hindrance to crack propagation in the laminate. Specimens impacted at 10 J were also subjected to tensile tests monitored by Digital Image Correlation (DIC) that allowed preliminary identification of peculiar failure modes of the hybrid laminates.

[1]  M. Staiger,et al.  Tailoring the vibration damping behaviour of flax fibre-reinforced epoxy composite laminates via polyol additions , 2014 .

[2]  V. Fiore,et al.  Mechanical behavior of carbon/flax hybrid composites for structural applications , 2012 .

[3]  John Morton,et al.  Geometrical effects in the low velocity impact response of CFRP , 1989 .

[4]  C. Santiuste,et al.  Residual flexural strength after low-velocity impact in glass/polyester composite beams , 2010 .

[5]  Liu Yubin,et al.  Impact Damage Modes and Residual Flexural Properties of Composites Beam , 2008 .

[6]  V. Fiore,et al.  Effect of areal weight and chemical treatment on the mechanical properties of bidirectional flax fabrics reinforced composites , 2010 .

[7]  Zhongyi Zhang,et al.  Development of flax/carbon fibre hybrid composites for enhanced properties. , 2013, Carbohydrate polymers.

[8]  Jose Maria Kenny,et al.  Impact and post-impact damage characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion , 2015 .

[9]  M. Misra,et al.  Biofibres, biodegradable polymers and biocomposites: An overview , 2000 .

[10]  F. Touchard,et al.  Numerical Determination and Experimental Validation of a Technological Specimen Representative of High-Pressure Hydrogen Storage Vessels , 2015, Mechanics of Composite Materials.

[11]  E. Collings,et al.  On the static and dynamic properties of flax and Cordenka epoxy composites , 2013 .

[12]  Giovanni Belingardi,et al.  Repeated impact response of hand lay-up and vacuum infusion thick glass reinforced laminates , 2008 .

[13]  Yentl Swolfs,et al.  Fibre hybridisation in polymer composites: a review , 2014 .

[14]  J. George,et al.  Mechanical properties of flax fibre reinforced epoxy composites , 1999 .

[15]  G. Belingardi,et al.  Low velocity impact tests of laminate glass-fiber-epoxy matrix composite material plates , 2002 .

[16]  M. D. Moura,et al.  Mode II fracture characterization of a hybrid cork/carbon-epoxy laminate , 2015 .

[17]  M. Jawaid,et al.  Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review , 2011 .

[18]  L. Lessard,et al.  Characterization of flax/epoxy prepregs before and after cure , 2013 .

[19]  C. Plummer,et al.  Damping of thermoset and thermoplastic flax fibre composites , 2014 .

[20]  Hiroyuki Hamada,et al.  Impact response of woven glass-fabric composites - I. Effect of fibre surface treatment , 1998 .

[21]  Sharad Shrivastava,et al.  A review on mechanical behavior of natural fiber based hybrid composites , 2012 .

[22]  W. Hall,et al.  A review of bast fibres and their composites. Part 1 – Fibres as reinforcements , 2010 .

[23]  Libo Yan,et al.  Flax fibre and its composites – A review , 2014 .

[24]  Serge Abrate,et al.  Delamination threshold loads for low velocity impact on composite laminates , 2000 .

[25]  S. Amico,et al.  Study of hybrid intralaminate curaua/glass composites , 2012 .

[26]  C. Santulli,et al.  Post-impact damage characterization of hybrid configurations of jute/glass polyester laminates using acoustic emission and IR thermography , 2009 .

[27]  Vincenzo Fiore,et al.  Effect of external basalt layers on durability behaviour of flax reinforced composites , 2016 .

[28]  M. D. de Moura,et al.  Residual Strength after Low Velocity Impact in Carbon-Epoxy Laminates , 2006 .

[29]  S. Abrate.  Impact on Laminated Composite Materials , 1991 .

[30]  Dahsin Liu,et al.  Impact-Induced Delamination—A View of Bending Stiffness Mismatching , 1988 .

[31]  M. Jawaid,et al.  Sisal/Carbon Fibre Reinforced Hybrid Composites: Tensile, Flexural and Chemical Resistance Properties , 2010 .

[32]  Zhongyi Zhang,et al.  Low velocity impact induced damage evaluation and its effect on the residual flexural properties of pultruded GRP composites , 2007 .

[33]  C. Santulli.  Impact properties of glass/plant fibre hybrid laminates , 2007 .

[34]  H. Hamada,et al.  Impact response of woven glass-fabric composites - II. Effect of temperature , 1998 .

[35]  K. John,et al.  Tensile Properties of Unsaturated Polyester-Based Sisal Fiber–Glass Fiber Hybrid Composites , 2004 .

[36]  C. Santulli,et al.  Effect of loading-unloading cycles on impact-damaged jute/glass hybrid laminates , 2009 .

[37]  Li Ma,et al.  Low-velocity impact and residual tensile strength analysis to carbon fiber composite laminates , 2010 .

[38]  S. Iannace,et al.  Effect of basalt fiber hybridization on the impact behavior under low impact velocity of glass/basalt woven fabric/epoxy resin composites , 2013 .

[39]  M. Maleque,et al.  Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications , 2014 .

[40]  B. Martorana,et al.  Effect of hybrid (micro- and nano-) fillers on impact response of GFRP composite , 2015 .

[41]  Rezak Ayad,et al.  Evaluation of the damping of hybrid carbon–flax reinforced composites , 2015 .

[42]  M. Mahinfalah,et al.  Low velocity impact of combination Kevlar/carbon fiber sandwich composites , 2005 .

[43]  G. Emms,et al.  The damping–modulus relationship in flax–carbon fibre hybrid composites , 2016 .