Effects of abnormal grain growth at longitudinal weld on the aging behavior and mechanical properties of 2196 Al Cu Li alloy profile

[1]  Guoqun Zhao,et al.  Abnormal grain growth of 2196 Al-Cu-Li alloy weld seams during extrusion and heat treatment , 2021 .

[2]  Yunlong Ma,et al.  Microstructure evolution and mechanical properties of Al-Cu-Li alloys with different rolling schedules and subsequent artificial ageing heat treatment , 2020 .

[3]  Z. Horita,et al.  Aging behavior of Al-Li-(Cu, Mg) alloys processed by different deformation methods , 2020 .

[4]  Guoqun Zhao,et al.  Effects of heat treatment on the microstructure and mechanical properties of extruded 2196 Al-Cu-Li alloy , 2020, Materials & Design.

[5]  M. Zhan,et al.  Age hardening behaviors of spun 2219 aluminum alloy component , 2020 .

[6]  Guoqun Zhao,et al.  Effects of extrusion parameters and post-heat treatments on microstructures and mechanical properties of extrusion weld seams in 2195 Al-Li alloy profiles , 2020 .

[7]  Xin Eric Wang,et al.  Quantitative analysis of the influences of pre-treatments on the microstructure evolution and mechanical properties during artificial ageing of an Al–Cu–Li–Mg–Ag alloy , 2020 .

[8]  Yunlong Ma,et al.  Strength and structure variation of 2195 Al-Li alloy caused by different deformation processes of hot extrusion and cold-rolling , 2020 .

[9]  Kegao Liu,et al.  Mechanical property and characterization of 7A04-T6 aluminum alloys bonded by friction stir welding , 2020 .

[10]  I. Singh,et al.  Effect of post-weld heat treatment on mechanical properties and fatigue crack growth rate in welded AA-2024 , 2020, Materials Science and Engineering: A.

[11]  Yun-lai Deng,et al.  Effect of ageing treatments on the precipitation behavior and mechanical properties of Al–Cu–Li alloys , 2020, Materials Science and Engineering: A.

[12]  M. Yadava,et al.  Microstructure and tensile response of friction stir welded Al–Cu–Li (AA2198-T8) alloy , 2020 .

[13]  R. Kaibyshev,et al.  Effect of pre-strain path on suppression of abnormal grain growth in friction-stir welded 6061 aluminum alloy , 2019, Materials Science and Engineering: A.

[14]  Chunhui Liu,et al.  Pre-strain-dependent natural ageing and its effect on subsequent artificial ageing of an Al-Cu-Li alloy , 2019, Journal of Alloys and Compounds.

[15]  N. Nayan,et al.  Effect of cross-rolling on microstructure and texture evolution and tensile behavior of aluminium-copper-lithium (AA2195) alloy , 2019, Materials Science and Engineering: A.

[16]  F. Shen,et al.  Effect of aging time on the microstructure evolution and mechanical property in an Al-Cu-Li alloy sheet , 2019, Materials Science and Engineering: A.

[17]  J. Cho,et al.  The Correlation of Macrostructure, Microstructure, and Texture with Room Temperature Mechanical Properties of a Twinning‐Induced Plasticity Automotive Steel after Friction Stir Spot Welding/Processing , 2018, steel research international.

[18]  Guoqun Zhao,et al.  Microstructures and mechanical properties of spray deposited 2195 Al-Cu-Li alloy through thermo-mechanical processing , 2018, Materials Science and Engineering: A.

[19]  Fei Liu,et al.  Analysis of empirical relation between microstructure, texture evolution and fatigue properties of an Al-Cu-Li alloy during different pre-deformation processes , 2018 .

[20]  K. Marthinsen,et al.  Through thickness variations of deformation texture in round profile extrusions of 6063-type aluminium alloy: Experiments, FEM and crystal plasticity modelling , 2018 .

[21]  Z. Zheng,et al.  Influences of Friction Stir Welding and Post‐Weld Heat Treatment on Al–Cu–Li Alloy , 2018 .

[22]  Yong-bo Xu,et al.  Strengthening mechanisms, deformation behavior, and anisotropic mechanical properties of Al-Li alloys: A review , 2017, Journal of advanced research.

[23]  A. Deschamps,et al.  Influence of Mg, Ag and Zn minor solute additions on the precipitation kinetics and strengthening of an Al-Cu-Li alloy , 2017 .

[24]  Yufeng Sun,et al.  Effect of abnormal grain growth on microstructure and mechanical properties of friction stir welded SPCC steel plates , 2017 .

[25]  Guoqun Zhao,et al.  Analysis of longitudinal weld seam defects and investigation of solid-state bonding criteria in porthole die extrusion process of aluminum alloy profiles , 2016 .

[26]  N. Tariq,et al.  The synergistic effect of Li addition on microstructure, texture and mechanical properties of extruded Al–Mg–Si alloys , 2016 .

[27]  P. Prangnell,et al.  Quantification of the influence of increased pre-stretching on microstructure-strength relationships in the Al–Cu–Li alloy AA2195 , 2016 .

[28]  Guoqun Zhao,et al.  Investigation of interface evolution, microstructure and mechanical properties of solid-state bonding seams in hot extrusion process of aluminum alloy profiles , 2016 .

[29]  A. Deschamps,et al.  Microstructure distribution in an AA2050 T34 friction stir weld and its evolution during post-welding heat treatment , 2015 .

[30]  T. Noh,et al.  Atomic structure and growth mechanism of T1 precipitate in Al-Cu-Li-Mg-Ag alloy , 2015 .

[31]  T. Dorin,et al.  Impact of grain microstructure on the heterogeneity of precipitation strengthening in an Al–Li–Cu alloy , 2015 .

[32]  T. Dorin,et al.  Quantification and modelling of the microstructure/strength relationship by tailoring the morphological parameters of the T1 phase in an Al–Cu–Li alloy , 2014 .

[33]  C. Liu,et al.  Double-atomic-wall-based dynamic precipitates of the early-stage S-phase in AlCuMg alloys , 2012 .

[34]  R. Rioja,et al.  The Evolution of Al-Li Base Products for Aerospace and Space Applications , 2012, Metallurgical and Materials Transactions A.

[35]  P. Prangnell,et al.  A combined approach to microstructure mapping of an Al-Li AA2199 friction stir weld , 2011 .

[36]  W. Tayon,et al.  Heat treatment of a friction-stir-welded and spin-formed Al-Li alloy , 2011 .

[37]  R. Mishra,et al.  Abnormal grain growth in friction stir processed alloys , 2008 .

[38]  M. Starink,et al.  Precipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloys , 2005 .

[39]  K. S. Prasad,et al.  On the crystalline and quasi-crystalline phase compounds in an Al–Li–Cu–Mg base alloy , 2004 .

[40]  A. Gaber,et al.  Characterization of the precipitates in Al–Li(8090) alloy using thermal measurements and TEM examinations , 2002 .

[41]  A. Sachdev,et al.  Strengthening potential of the cubic σ precipitate in Al-Cu-Mg-Si alloys , 1994 .

[42]  E. Lee,et al.  Effect of T1 precipitate on the anisotropy of AlLi alloy 2090 , 1993 .

[43]  G. Tempus,et al.  Influence of extrusion process parameters and texture on mechanical properties of Al–Li extrusions , 1991 .

[44]  J. C. Huang,et al.  Addition rules and the contribution of δ' precipitates to strengthening of aged AlLiCu alloys , 1988 .

[45]  G. Tempus,et al.  INFLUENCE OF EXTRUSION PROCESS PARAMETERS ON THE MECHANICAL PROPERTIES OF Al-Li-EXTRUSIONS , 1987 .

[46]  P. Niskanen,et al.  Corrosion of aluminum alloys containing lithium , 1982 .

[47]  David B. Williams,et al.  The Precipitation of δ′ (Al3Li) in Dilute Aluminium–Lithium Alloys , 1975 .