This paper considers the problem of sensing and controlling torch position in the pulsed gas metal arc welding (P-GMAW) process. The attitude and positional control described is essential to the production of quality welds with a specified geometry. For constant current arc welding processes, as normally employed with P-GMAW, the arc voltage signal variations that occur as a function of changes in the contact-tube-to-work distance can be used to automatically control the welding system with respect to bead placement and proper sidewall fusion. However, the arc voltage signals are uncertain and noisy because of many inherent disturbances associated with the electrode tip, droplet formation, droplet detachment, and droplet transfer through the arc. To deal with the nonlinear time-varying process with its inherent stochastic disturbances associated with the metal transfer, the theory of fuzzy sets was used as a general framework to interpret the uncertain arc signals and provide logic for control. The fuzzy logic controller weld joint tracking system was implemented and tested with pulsed gas metal arc welds under a variety of conditions. The goal was to obtain quick and accurate response to tracking errors in the presence of disturbances. A series of experiments was conducted to evaluate the performance of the fuzzy logic controller. The experimental results show that the fuzzy logic controller was found to be suitable for these purposes and better than methods based on signal averaging and bipolar decision levels under these criteria.
[1]
L. Zadeh,et al.
Fuzzy sets and applications : selected papers
,
1987
.
[2]
P.J. King,et al.
The application of fuzzy control systems to industrial processes
,
1977,
Autom..
[3]
T. Ross.
Fuzzy Logic with Engineering Applications
,
1994
.
[4]
Bart Kosko,et al.
Fuzzy Engineering
,
1996
.
[5]
Sergei Ovchinnikov,et al.
Fuzzy sets and applications
,
1987
.
[6]
Lotfi A. Zadeh,et al.
Outline of a New Approach to the Analysis of Complex Systems and Decision Processes
,
1973,
IEEE Trans. Syst. Man Cybern..
[7]
Lotfi A. Zadeh,et al.
Fuzzy Sets
,
1996,
Inf. Control..
[8]
George E. Cook,et al.
Robotic Arc Welding: Research in Sensory Feedback Control
,
1983,
IEEE Transactions on Industrial Electronics.
[9]
S. Murakami,et al.
Weld-line tracking control of arc welding robot using fuzzy logic controller
,
1989
.
[10]
Russell C. Eberhart,et al.
Implementation of evolutionary fuzzy systems
,
1999,
IEEE Trans. Fuzzy Syst..
[11]
Alvin M. Strauss,et al.
Statistical process control application to weld process
,
1997
.
[12]
L. Zadeh.
Fuzzy sets as a basis for a theory of possibility
,
1999
.
[13]
Stephen Yurkovich,et al.
Fuzzy Control
,
1997
.
[14]
Hyungsuck Cho.
A fuzzy linguistic control approach to the control of weld pool size in gas metal arc welding processes
,
1991
.