Novel electroactive, silicate nanocomposites prepared to be used as actuators and artificial muscles

Reported herein is a newly developed nanocompositing technique that can provide an effective process tool to optimize the desirable properties of the base ionic polymer materials to be used as effective electroactive polymer (EAP) actuators and artificial muscles. We developed polymer nanocomposite (PNC) materials that incorporate clay-based layered silicates. The clay-based layered silicates were intercalated within the polymer matrix of perfluorosulfonate ionomer. A certain clay, Montmorillonite (MMT), was selected as an effective clay and was modified by a cationic surfactant in order to lower its surface energy significantly. This process gave rise to a favorable intercalation of Montmorillonite within the galleries. The obtained XRD patterns prove that the silicate layers are intercalated in a continuous polymer matrix. Such a polymer nanocomposite shows significantly improved structural and electrochemical behavior and, thus, can be successfully used as the effective base material of EAP actuators and artificial muscles.

[1]  K. Oguro,et al.  Bending of Polyelectrolyte Membrane–Platinum Composites by Electric Stimuli I. Response Characteristics to Various Waveforms , 1995 .

[2]  J. O. Simpson,et al.  Ionic polymer-metal composites (IPMCs) as biomimetic sensors, actuators and artificial muscles - a review , 1998 .

[3]  B. Theng.  The Chemistry of Clay-Organic Reactions , 2024 .

[4]  Mohsen Shahinpoor,et al.  Novel ionic polymer–metal composites equipped with physically loaded particulate electrodes as biomimetic sensors, actuators and artificial muscles , 2002 .

[5]  Robert B. Moore,et al.  Barriers to Flow in Semicrystalline Ionomers: A Procedure for Preparing Melt-Processed Perfluorosulfonate Ionomer Films and Membranes , 1992 .

[6]  J. E. Mark.  Ceramic‐reinforced polymers and polymer‐modified ceramics , 1996 .

[7]  Gérard Gebel,et al.  Structure and related properties of solution-cast perfluorosulfonated ionomer films , 1987 .

[8]  Donald J. Leo,et al.  Feedback control of the bending response of ionic polymer-metal composite actuators , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[9]  Mohsen Shahinpoor,et al.  Novel physically loaded and interlocked electrode developed for ionic polymer-metal composites (IPMCs) , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[10]  Kaushik Bhattacharya,et al.  Electromechanical Models for Optimal Design and Effective Behavior of Electroactive Polymers , 2004 .

[11]  K. Kim,et al.  The effect of surface-electrode resistance on the performance of ionic polymer-metal composite (IPMC) artificial muscles , 2000 .

[12]  K. Kim,et al.  Ionic polymer–metal composites: II. Manufacturing techniques , 2003 .

[13]  J. Bicerano,et al.  Polymeric Nanocomposites for Automotive Applications , 2000 .

[14]  K. Kim,et al.  A novel method of manufacturing three-dimensional ionic polymer–metal composites (IPMCs) biomimetic sensors, actuators and artificial muscles , 2002 .

[15]  K. Sadeghipour,et al.  Development of a novel electrochemically active membrane and 'smart' material based vibration sensor/damper , 1992 .

[16]  Mohsen Shahinpoor,et al.  Ionic polymer-metal composites as multifunctional materials , 2003 .

[17]  K. Kim,et al.  Ionic polymer-metal composites: I. Fundamentals , 2001 .

[18]  K. Oguro,et al.  Effect on bending behavior of counter cation species in perfluorinated sulfonate membrane–platinum composite , 1998 .

[19]  P. Dubois,et al.  Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials , 2000 .

[20]  R. E. Smallman,et al.  An assessment of high voltage electron microscopy (HVEM). An invited review , 1977 .

[21]  Jaedo Nam,et al.  Development of large-surface Nafion-metal composite actuator and its electrochemical characterization , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[22]  M. Radosavljevic,et al.  Carbon nanotube composites for thermal management , 2002, cond-mat/0205418.

[23]  Mohsen Shahinpoor,et al.  Mechanoelectric effects in ionic gels , 2000 .