Numerical analysis of a medium scale latent energy storage unit for district heating systems

The present paper describes the application of computational fluid-dynamics (CFD) to the design and characterization of a medium scale energy storage unit for district heating systems. The shell-and-tube LHTES unit contains a technical grade paraffin (RT100) as phase change material (PCM) and uses water as heat transfer fluid (HTF). The system has been designed to transfer heat from the district to the building heating networks. After an initial description of the LHTES unit and a wide literature overview on the subject, the paper discusses the need for thermal enhancement to improve the thermal conductivity of the PCM. A solution based on a paraffin-graphite composite with a 15% graphite volume fraction has been found to be well performing in this particular application. Several operating scenarios characterized by heat requests ranging between 130 kW and 400 kW have been explored and the main outputs presented as function of Re and St numbers. The timewise variations of other significant quantities such as liquid fraction, sensible and latent energy content, HFT outlet temperature and heat fluxes have been also presented and discussed. A final discussion on the possible system configurations shows that in comparison to traditional water storage systems for district heating, LHTES systems provide, depending on the chose alternative, higher energy storage densities.

[1]  D. Y. Goswami,et al.  Analysis of Transient Heat Transfer in a Thermal Energy Storage Module , 2010 .

[2]  Kamal Abdel Radi Ismail,et al.  Performance of a thermal storage system of the vertical tube type , 2000 .

[3]  S. D. Kim,et al.  Heat-transfer characteristics of a latent heat storage system using MgCl2 · 6H2O , 1992 .

[4]  Piia Lamberg,et al.  Approximate analytical model for two-phase solidification problem in a finned phase-change material storage , 2004 .

[5]  T. Astrup,et al.  Energy recovery from waste incineration: assessing the importance of district heating networks. , 2010, Waste management.

[6]  Jeyhoon M. Khodadadi,et al.  Nanoparticle-enhanced phase change materials (nepcm) with great potential for improved thermal energy storage , 2007 .

[7]  A. Campos-Celador,et al.  Development and comparative analysis of the modeling of an innovative finned-plate latent heat thermal energy storage system , 2013 .

[8]  Wen-Long Cheng,et al.  Numerical analysis of a novel household refrigerator with shape-stabilized PCM (phase change material) heat storage condensers , 2013 .

[9]  Amar M. Khudhair,et al.  A review on phase change energy storage: materials and applications , 2004 .

[10]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[11]  Vittorio Verda,et al.  Primary energy savings through thermal storage in district heating networks , 2011 .

[12]  Vaughan R Voller,et al.  ENTHALPY-POROSITY TECHNIQUE FOR MODELING CONVECTION-DIFFUSION PHASE CHANGE: APPLICATION TO THE MELTING OF A PURE METAL , 1988 .

[13]  Francis Agyenim,et al.  A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS) , 2010 .

[14]  Sunil Kumar Singal,et al.  Review of mathematical modeling on latent heat thermal energy storage systems using phase-change material , 2008 .

[15]  Brian Vad Mathiesen,et al.  The role of district heating in future renewable energy systems , 2010 .

[16]  Xavier Py,et al.  Storage composites for the optimisation of solar water heating systems , 2008 .

[17]  S. D. Pohekar,et al.  Performance enhancement in latent heat thermal storage system: A review , 2009 .

[18]  A. Hasan.  Phase change material energy storage system employing palmitic acid , 1994 .

[19]  A. Faghri,et al.  Performance characteristics of a thermal energy storage module - A transient PCM/forced convection conjugate analysis , 1991 .

[20]  M. Lacroix.  Numerical simulation of a shell-and-tube latent heat thermal energy storage unit , 1993 .

[21]  Haifeng Shi,et al.  Composite macrocapsule of phase change materials/expanded graphite for thermal energy storage , 2013 .

[22]  M. Dimaano,et al.  Performance investigation of the capric and lauric acid mixture as latent heat energy storage for a cooling system , 2002 .

[23]  Adriano Sciacovelli,et al.  Numerical Model for Storage Systems Based on Phase-Change Materials , 2011 .

[24]  Kamal Abdel Radi Ismail,et al.  Thermal performance of a pcm storage unit , 1999 .

[25]  A. Sari,et al.  Thermal Performance of a Eutectic Mixture of Lauric and Stearic Acids as PCM Encapsulated in the Annulus of Two Concentric Pipes , 2002 .

[26]  Wujun Zhang,et al.  Numerical simulation and parametric study on new type of high temperature latent heat thermal energy storage system , 2008 .

[27]  A. Sari,et al.  Thermal energy storage system using stearic acid as a phase change material , 2001 .

[28]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[29]  G. Ziskind,et al.  Melting in a vertical cylindrical tube: Numerical investigation and comparison with experiments , 2010 .

[30]  Hamid Ait Adine,et al.  Numerical analysis of the thermal behaviour of a shell-and-tube heat storage unit using phase change materials , 2009 .

[31]  Francis Agyenim,et al.  Heat transfer enhancement in medium temperature thermal energy storage system using a multitube heat transfer array , 2010 .

[32]  Mervyn Smyth,et al.  A comparison of heat transfer enhancement in a medium temperature thermal energy storage heat exchanger using fins , 2009 .

[33]  X. Py,et al.  Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage material , 2001 .

[34]  Anica Trp,et al.  An experimental and numerical investigation of heat transfer during technical grade paraffin melting and solidification in a shell-and-tube latent thermal energy storage unit , 2005 .

[35]  A. Abdel-azim.  Fundamentals of Heat and Mass Transfer , 2011 .

[36]  A. Sari.  Thermal characteristics of a eutectic mixture of myristic and palmitic acids as phase change material for heating applications , 2003 .