Solid-state Conducting Polymer Actuator based on Electrochemically-deposited Polypyrrole and Solid Polymer Electrolyte

Conducting polymer (CP) actuators undergo a volumetric change as their redox state is changed. The volumetric change is due to the movement of counter ions into the film during the electrical oxidation process. Liquid electrolytes are mostly used for the actuation of CP actuators, but that is an impediment for practical use of CP actuator. To overcome this problem, in this study solid polymer electrolyte (SPE) was introduced into the CP actuator instead of electrolyte solution. A polypyrrole (PPy)/SPE/PPy electroactive tri-layer actuator was prepared by the electrochemical polymerization of pyrrole and the actuation characteristics were studied. An all-solid actuator, consisting of two PPy films and a SPE based on polyurethane (PU), clearly showed a reversible displacement in an atmosphere when a voltage was applied.

[1]  C. R. Martin,et al.  Infrared investigations of pristine, doped and partially doped polypyrrole , 1992 .

[2]  J.J. Shea,et al.  Handbook of Conducting Polymers, 2nd Edition , 1999, IEEE Electrical Insulation Magazine.

[3]  G. Wallace,et al.  Development of polypyrrole-based electromechanical actuators , 2000 .

[4]  J. Roncali,et al.  Structural effect on the redox thermodynamics of poly(thiophenes) , 1990 .

[5]  Geoffrey M. Spinks,et al.  Conductive Electroactive Polymers: Intelligent Materials Systems , 1997 .

[6]  W. Smyrl,et al.  Quartz crystal microbalance analysis: Part I. Evidence of anion or cation insertion into electropolymerized conducting polymers , 1989 .

[7]  I. Yilgor,et al.  Comparison of hydrogen bonding in polydimethylsiloxane and polyether based urethane and urea copolymers , 2000 .

[8]  J. A. Logan,et al.  Electrochemistry of conducting polypyrrole films , 1981 .

[9]  A. MacDiarmid,et al.  Optical properties of polyaniline , 1993 .

[10]  R. Baughman.  Conducting polymer artificial muscles , 1996 .

[11]  R. Pethrick,et al.  Linear segmented polyurethane electrolytes—II. conductivity and related properties , 1989 .

[12]  D. Roylance,et al.  Influence of dopant ion and synthesis variables on mechanical properties of polypyrrole films , 1987 .

[13]  Stuart L. Cooper,et al.  Morphology and properties of segmented polyether polyurethaneureas , 1983 .

[14]  T. W. Smith,et al.  Properties of Segmented Polyether Poly(urethaneureas) Based of 2,4-Toluene Diisocyanate. 2. Infrared and Mechanical Studies , 1980 .

[15]  L. J. Lyons,et al.  Highly Conductive Siloxane Polymers , 2001 .

[16]  L. J. Lyons,et al.  Ion conductive characteristics of cross-linked network polysiloxane-based solid polymer electrolytes , 2004 .

[17]  K. Wynne,et al.  Poly(pyrrol-2-ylium tosylate), electrochemical synthesis and physical and mechanical properties , 1985 .

[18]  S. Qutubuddin,et al.  Electrochemically synthesized polypyrrole films: effects of polymerization potential and electrolyte type , 1995 .

[19]  M. Bown,et al.  Effect of polydimethylsiloxane macrodiol molecular weight on properties and morphology of polyurethane and polyurethaneurea , 2003 .

[20]  D. De Rossi,et al.  Performance and work capacity of a polypyrrole conducting polymer linear actuator , 1997 .

[21]  P. Jacobsson,et al.  Ionic interactions and transport in a low-molecular-weight model polymer electrolyte , 1998 .

[22]  G. Tourillon,et al.  Organic conducting polymers derived from substituted thiophenes as electrochromic material , 1983 .

[23]  T F Otero,et al.  Soft and wet conducting polymers for artificial muscles. , 1998, Advanced materials.