Bond behavior of polymer- and mineral-impregnated carbon fiber yarns towards concrete matrices at elevated temperature levels

[1]  V. Mechtcherine,et al.  Influence of elevated temperatures on the residual and quasi in-situ flexural strength of strain-hardening geopolymer composites (SHGC) reinforced with PVA and PE fibers , 2022, Construction and Building Materials.

[2]  V. Mechtcherine,et al.  Role of sizing agent on the microstructure morphology and mechanical properties of mineral-impregnated carbon-fiber (MCF) reinforcement made with geopolymers , 2021 .

[3]  D. Cardoso,et al.  Flexural behavior of carbon-textile-reinforced concrete I-section beams , 2021 .

[4]  V. Mechtcherine,et al.  Development and testing of fast curing, mineral-impregnated carbon fiber (MCF) reinforcements based on metakaolin-made geopolymers , 2020, Cement and Concrete Composites.

[5]  V. Mechtcherine,et al.  Tensile behavior of strain-hardening geopolymer composites (SHGC) under impact loading , 2020 .

[6]  Y. Al-Salloum,et al.  Bond strength between concrete substrate and metakaolin geopolymer repair mortars at ambient and elevated temperatures , 2020 .

[7]  B. Fiorio,et al.  Study of the pull-out test of multifilament yarns embedded in cementitious matrix , 2020 .

[8]  V. Mechtcherine,et al.  On the mechanical performance of K- and Na-based strain-hardening geopolymer composites (SHGC) reinforced with PVA fibers , 2020 .

[9]  V. Mechtcherine,et al.  Extrusion-Based Additive Manufacturing with Carbon Reinforced Concrete: Concept and Feasibility Study , 2020, Materials.

[10]  B. Middendorf,et al.  Geopolymers as an alternative to Portland cement: An overview , 2020 .

[11]  Rebecca Mansur de Castro Silva,et al.  Carbon textile reinforced concrete: materials and structural analysis , 2020 .

[12]  Viktor Mechtcherine,et al.  Mineral-impregnated carbon fiber composites as novel reinforcement for concrete construction: Material and automation perspectives , 2020 .

[13]  C. Dunant,et al.  Impact of temperature on expansive behavior of concrete with a highly reactive andesite due to the alkali–silica reaction , 2019, Cement and Concrete Research.

[14]  V. Mechtcherine,et al.  Mineral-impregnated carbon fibre reinforcement for high temperature resistance of thin-walled concrete structures , 2019, Cement and Concrete Composites.

[15]  T. Triantafillou,et al.  Strengthening of Concrete Structures with Textile Reinforced Mortars: State-of-the-Art Review , 2019, Journal of Composites for Construction.

[16]  P. H. Borges,et al.  Evaluation of Fiber–Matrix Bond in the Mechanical Behavior of Geopolymer Composites Reinforced with Natural Fibers , 2019, Advances in Civil Engineering Materials.

[17]  Manfred Curbach,et al.  Lightweight ceiling system made of carbon reinforced concrete , 2018 .

[18]  Thanasis Triantafillou,et al.  State-of-the-art on strengthening of masonry structures with textile reinforced mortar (TRM) , 2018, Construction and Building Materials.

[19]  Viktor Mechtcherine,et al.  Verbundverhalten mineralisch gebundener und polymergebundener Bewehrungsstrukturen aus Carbonfasern bei Temperaturen bis 500 °C , 2018, Beton- und Stahlbetonbau.

[20]  Manfred Curbach,et al.  Parking slabs made of carbon reinforced concrete , 2018 .

[21]  Eduardo Júlio,et al.  Influence of concrete strength and steel fibre geometry on the fibre/matrix interface , 2017 .

[22]  F. A. Silva,et al.  On The Mechanical Behavior of Metakaolin Based Geopolymers Under Elevated Temperatures , 2017 .

[23]  Alexander Scholzen,et al.  Structural behavior of a lightweight, textile-reinforced concrete barrel vault shell , 2017 .

[24]  B. P. Gautam,et al.  The effect of elevated conditioning temperature on the ASR expansion, cracking and properties of reactive Spratt aggregate concrete , 2017 .

[25]  R. T. Toledo Filho,et al.  A comparative study of hydration kinetics of different cements by thermogravimetry on calcined mass basis , 2017, Journal of Thermal Analysis and Calorimetry.

[26]  V. Mechtcherine,et al.  Micro- and nanoparticle mineral coating for enhanced properties of carbon multifilament yarn cement-based composites , 2017 .

[27]  N. Collier.  Transition and Decomposition Temperatures of Cement Phases – a Collection of Thermal Analysis Data , 2016 .

[28]  Jiyang Wang,et al.  The high-temperature resistance performance of TRC thin-plates with different cementitious materials: Experimental study , 2016 .

[29]  Gökhan Görhan,et al.  The effect of curing on the properties of metakaolin and fly ash-based geopolymer paste , 2016 .

[30]  Alva Peled,et al.  Effect of reinforcement with carbon fabrics impregnated with nanoparticles on the tensile behavior of cement-based composites , 2016 .

[31]  V. Corinaldesi,et al.  Mechanical properties of FRCM using carbon fabrics with different coating treatments , 2016 .

[32]  P. Chindaprasirt,et al.  High calcium fly ash geopolymer mortar containing Portland cement for use as repair material , 2015 .

[33]  Matteo Colombo,et al.  Bending behaviour of Textile Reinforced Concrete sandwich beams , 2015 .

[34]  Luke Bisby,et al.  Fire behaviour of FRP-strengthened reinforced concrete structural elements: A state-of-the-art review , 2015 .

[35]  Eric R. Giannini,et al.  Alkali-silica reaction: Current understanding of the reaction mechanisms and the knowledge gaps , 2015 .

[36]  Alexander Scholzen,et al.  Thin‐walled shell structures made of textile‐reinforced concrete , 2015 .

[37]  M. Motavalli,et al.  Structural Strengthening of Concrete with Fiber Reinforced Cementitious Matrix (FRCM) at Ambient and Elevated Temperature — Recent Investigations in Switzerland , 2014 .

[38]  Antonio Nanni,et al.  Out-of-Plane Behavior of URM Walls Strengthened with Fabric-Reinforced Cementitious Matrix Composite , 2014 .

[39]  Jay G. Sanjayan,et al.  Effect of different superplasticizers and activator combinations on workability and strength of fly ash based geopolymer , 2014 .

[40]  Viktor Mechtcherine,et al.  Effects of elevated temperatures on the interface properties of carbon textile-reinforced concrete , 2014 .

[41]  A. Nanni,et al.  URM Walls Strengthened with Fabric-Reinforced Cementitious Matrix Composite Subjected to Diagonal Compression , 2014 .

[42]  J. Dweck,et al.  Importance of quantitative thermogravimetry on initial cement mass basis to evaluate the hydration of cement pastes and mortars , 2013, Journal of Thermal Analysis and Calorimetry.

[43]  C. Cherif,et al.  Mechanical behaviour of carbon and glass filament yarns under high temperatures for composite applications , 2013 .

[44]  R. Cioffi,et al.  Use of geopolymers for composite external reinforcement of RC members , 2013 .

[45]  Antonio Nanni,et al.  A New Tool for Concrete and Masonry Repair , 2012 .

[46]  Michael D.A. Thomas,et al.  Alkali-silica reactions (ASR): literature review on parameters influencing laboratory performance testing , 2012 .

[47]  Y. Al-Salloum,et al.  EXPERIMENTAL AND NUMERICAL STUDY FOR THE SHEAR STRENGTHENING OF REINFORCED CONCRETE BEAMS USING TEXTILE-REINFORCED MORTAR , 2012 .

[48]  Angelo D'Ambrisi,et al.  Flexural Strengthening of RC Beams with Cement-Based Composites , 2011 .

[49]  P. Louda,et al.  New Generation of Geopolymer Composite for Fire-Resistance , 2011 .

[50]  F. Pacheco-Torgal,et al.  Concrete retrofitting using metakaolin geopolymer mortars and CFRP , 2011 .

[51]  M. Urbaniak.  A relationship between the glass transition temperature and the conversion degree in the curing reaction of the EPY ® epoxy system , 2011 .

[52]  Shigemitsu Hatanaka,et al.  High-Strength Geopolymer Using Fine High-Calcium Fly Ash , 2011 .

[53]  Xiao Yao,et al.  Potential application of geopolymers as protection coatings for marine concrete I. Basic properties , 2010 .

[54]  G. Marom,et al.  Bonding characteristics of multifilament polymer yarns and cement matrices , 2008 .

[55]  Shi-lang Xu,et al.  Bond properties and experimental methods of textile reinforced concrete , 2007 .

[56]  Tahir Gonen,et al.  The influence of mineral admixtures on the short and long-term performance of concrete , 2007 .

[57]  J. Deventer,et al.  Geopolymer technology: the current state of the art , 2007 .

[58]  Grant C. Lukey,et al.  Physical evolution of Na-geopolymer derived from metakaolin up to 1000 °C , 2007 .

[59]  J. Deventer,et al.  Thermal evolution of metakaolin geopolymers: Part 1 – Physical evolution , 2006 .

[60]  Mark F. Green,et al.  Response to fire of concrete structures that incorporate FRP , 2005 .

[61]  P. Duxson,et al.  Effect of Alkali Cations on Aluminum Incorporation in Geopolymeric Gels , 2005 .

[62]  A. Sherif,et al.  Exterior Cladding Panels As An Application Of Textile Reinforced Concrete , 2004, SP-224: Thin Reinforced Cement-Based Products and Construction Systems.

[63]  Josko Ozbolt,et al.  Bond Characteristics of Carbon, Alkali Resistant Glass, and Aramid Textiles in Mortar , 2004 .

[64]  J. Dweck,et al.  Study by thermogravimetry of the evolution of ettringite phase during type II Portland cement hydration , 2002 .

[65]  P. Balaguru,et al.  Comparative study of high temperature composites , 2001 .

[66]  S. Chand,et al.  Review Carbon fibers for composites , 2000 .

[67]  P. Balaguru,et al.  FIRE RESISTANT ALUMINOSILICATE COMPOSITES , 1997 .

[68]  Odd E. Gjørv,et al.  Effect of silica fume on pore structure and chloride diffusivity of low parosity cement pastes , 1991 .

[69]  W. Kriven,et al.  Mechanical behavior of K‐geopolymers reinforced with silane‐coated basalt fibers , 2020 .

[70]  J. Marques Filho,et al.  Comparison of the Silica Fume Content for High-Strength Concrete Production: Chemical Analysis of the Pozzolanic Reaction and Physical Behavior by Particle Packing , 2020 .

[71]  Norbert Will,et al.  Extremely Light and Slender Precast Pedestrian-Bridge Made Out of Textile-Reinforced Concrete (TRC) , 2018 .

[72]  G. Lancioni,et al.  Fabric-reinforced cementitious matrix behavior at high-temperature: Experimental and numerical results , 2017 .

[73]  Siddam Reddy Anilkumar Reddy,et al.  Effect of Silica Fume on Strength and Durability Parameters of Concrete , 2015 .

[74]  V. Mechtcherine,et al.  8 Modifying carbon roving-cement matrix bond by inorganic coating , 2015, HPFRCC-7..

[75]  A. Nanni,et al.  Durability of Fabric Reinforced Cementitious Matrix (FRCM) composites , 2014 .

[76]  M. Curbach,et al.  HIGH TEMPERATURE TESTS ON TEXTILE REINFORCED CONCRETE ( TRC ) STRAIN SPECIMENS , 2010 .

[77]  C. Kulas,et al.  TRC PEDESTRIAN BRIDGE – DESIGN , LOAD-BEARING BEHAVIOR AND PRODUCTION PROCESSES OF A SLENDER AND LIGHT-WEIGHT CONSTRUCTION , 2010 .

[78]  Josef Hegger,et al.  A Slender Pedestrian Bridge Made of Textile Reinforced Concrete , 2010 .

[79]  Petr Louda,et al.  Effect of curing temperature on flexural properties of silica-based geopolymer-carbon reinforced composite , 2009 .

[80]  H. Mutsuyoshi,et al.  Mechanical Properties of Newly Developed Heat-Resistant FRP Bars , 2008 .

[81]  M. Raupach,et al.  Epoxy-impregnated textiles in concrete Load bearing capacity and durability , 2006 .

[82]  C. Sauder,et al.  The tensile behavior of carbon fibers at high temperatures up to 2400 °C , 2004 .

[83]  H. Reinhardt,et al.  BOND BEHAVIOUR OF TEXTILE REINFORCEMENT IN REIN- FORCED AND PRESTRESSED CONCRETE , 2001 .

[84]  N. Carino,et al.  Mechanical properties of high-strength concrete at elevated temperatures , 2001 .