Reoxidation Behavior in Al Killed Steel during Casting
暂无分享,去创建一个
plant experiments using commercial 85 •~ 103 kg tundish. Experimental results were discussed by the coupled reaction model. Observed apparent rate constants of [sol.Al] decreased with increasing (CaO)/(SiO2) ratio in laboratory experiments and showed a good agreement with calculated ones. Flow rate of air leak at steady state was evaluated to be 3.0•~10-5 and 4.0•~ 10-4 m3/s inside and outside of immersion tube in commercial tundish, respectively and was estimated to have little influence on reoxidation. Mass transfer coefficient in metal was estimated to be 6.0•~ 10-5 m/s based on the tundish mixing model and the coupled reaction model. Observed [sol.Al] in tundish decreased with increasing (%FeO)+(%MnO) value in ladle slag and showed a good agreement with calculated one by considering reoxidation in ladle and air leak at unsteady state.
[1] K. Mori,et al. Oxidation Rate of Aluminum in Molten Iron by CaO-SiO2-Al2O3-FeO-MnO Slag , 1996 .
[2] Hiroyuki Tanaka,et al. Quantitative Analysis of Contamination of Liquid Steel in Tundish , 1993 .
[3] R. D. Pehlke,et al. Reduction rate of SiO2 in slag by carbon- saturated iron , 1993 .
[4] Fujii Tetsuya,et al. Removal of Inclusion from Molten Steel in Continuous Casting Tundish , 1992 .