Exergy assessment of single and dual pressure industrial ammonia synthesis units

In exothermic, equilibrium-limited processes such as ammonia synthesis, higher per-pass conversions are often achieved by withdrawing the enthalpy of reaction before the conversion has been completed. However, although inter-bed cooling may help controlling the bed feed temperatures and generates high pressure steam, it also shifts the reacting mixture away from equilibrium (i.e. by increasing the reacting driving force, -ΔG), thus increasing the process irreversibilities. In order to offset the unfavorable effects of the bed intercooling in the decreasing-volume reactive system as well as to reduce the power consumption, a catalytic once-through conversion section is introduced in a 1000 metric tNH3/day ammonia synthesis unit. Three unit configurations are analyzed: two are based on single pressure loops (SP150, SP200), whereas the other one (DP) operates at two incremental levels of pressure (83/200 bar). The dual pressure process aims to show the relevance of the Counteraction Principle for driving the system irreversibilities down. The plant-wide and main components' performance are also compared in terms of exergy efficiency, economic revenues and utilities consumption. As a result, the syngas compressor, ammonia converter, waste heat recovery and ammonia refrigeration systems are found to be responsible for about 80–86% of total irreversibilities in the ammonia loop, which varies from 23.8 MW for DP and 27.2 MW for SP150. A cryogenic purge gas treatment unit allows improving the loop performance in 9–13% if compared to non-hydrogen-recovery systems.

[1]  Zornitza Kirova-Yordanova,et al.  Exergy analysis of industrial ammonia synthesis , 2004 .

[2]  Ignacio E. Grossmann,et al.  A structural optimization approach in process synthesis. II: Heat recovery networks , 1983 .

[3]  J. Beattie,et al.  The Thermodynamic Treatment of Chemical Equilibria in Systems Composed of Real Gases. I. An Approximate Equation for the Mass Action Function Applied to the Existing Data on the Haber Equilibrium , 1930 .

[4]  Sigurd Skogestad,et al.  Computers and Chemical Engineering , 2008 .

[5]  Kj Krzysztof Ptasinski,et al.  Integration of a turbine expander with an exothermic reactor loop—Flow sheet development and application to ammonia production , 2003 .

[6]  Nassim Tahouni,et al.  Integration of a gas turbine with an ammonia process for improving energy efficiency , 2013 .

[7]  K. Denbigh.  The second-law efficiency of chemical processes☆ , 1956 .

[8]  Farzad Abdollahi-Demneh,et al.  Calculating exergy in flowsheeting simulators: A HYSYS implementation , 2011 .

[9]  K. Tamaru.  The History of the Development of Ammonia Synthesis , 1991 .

[10]  S. Kjelstrup,et al.  Minimum entropy production rate in plug flow reactors: An optimal control problem solved for SO2 oxidation , 2004 .

[11]  J. Paris,et al.  Integrated exergy load distribution method and pinch analysis , 1999 .

[12]  Christoph Weber,et al.  Energy efficiency improvements in ammonia production—perspectives and uncertainties , 2005 .

[13]  Huazhang Liu.  Ammonia Synthesis Catalysts: Innovation and Practice , 2013 .

[14]  Stanley I. Sandler,et al.  Modeling Vapor-Liquid Equilibria: Cubic Equations of State and their Mixing Rules , 1998 .

[15]  V. M. Brodyansky,et al.  The Efficiency of Industrial Processes: Exergy Analysis and Optimization , 1994 .

[16]  D. Dyson,et al.  Kinetic expression with diffusion correction for ammonia synthesis on industrial catalyst , 1968 .

[17]  Mamata Mukhopadhyay,et al.  Fundamentals of Cryogenic Engineering , 2010 .

[18]  Silvio de Oliveira,et al.  An exergy based approach to determine production cost and CO2 allocation for petroleum derived fuels , 2014 .

[19]  Silvio de Oliveira Junior,et al.  Modeling and optimization of an industrial ammonia synthesis unit: An exergy approach , 2017 .

[20]  秋鹿 研一,et al.  Ammonia : catalysis and manufacture , 1995 .

[21]  C. Jacobsen.  Novel class of ammonia synthesis catalysts , 2000 .

[22]  Y. Yampolskii.  Polymeric Gas Separation Membranes , 1993 .

[23]  Ignacio E. Grossmann,et al.  Simultaneous optimization models for heat integration—II. Heat exchanger network synthesis , 1990 .

[24]  J. Niemantsverdriet,et al.  Concepts of modern catalysis and kinetics , 2005 .

[25]  Ignacio E. Grossmann,et al.  A structural optimization approach in process synthesis. III: Total processing systems , 1983 .

[26]  J. Nørskov,et al.  Towards the computational design of solid catalysts. , 2009, Nature chemistry.

[28]  Silvio de Oliveira Junior,et al.  On the efficiency, exergy costs and CO2 emission cost allocation for an integrated syngas and ammonia production plant , 2016 .

[29]  Ignacio E. Grossmann,et al.  A structural optimization approach in process synthesis—I: Utility systems , 1983 .

[30]  T. Gundersen,et al.  A comparison of exergy efficiency definitions with focus on low temperature processes , 2012 .

[31]  Ignacio E. Grossmann,et al.  Simultaneous optimization models for heat integration. III, Process and heat exchanger network optimization , 1990 .

[32]  Marc A. Rosen,et al.  Comparative assessment of thermodynamic efficiencies and losses for natural gas-based production pro , 1996 .

[33]  François Maréchal,et al.  Thermo-environomic evaluation of the ammonia production , 2015 .

[34]  H. S. Fogler,et al.  Elements of Chemical Reaction Engineering , 1986 .

[35]  Ignacio E. Grossmann,et al.  Simultaneous optimization models for heat integration—I. Area and energy targeting and modeling of multi-stream exchangers , 1990 .

[36]  H. J. Van Der Kooi,et al.  Exergy analysis with a flowsheeting simulator-II. Application; synthesis gas production from natural gas , 1996 .

[37]  H. Blonk,et al.  LCI data for the calculation tool Feedprint for greenhouse gas emissions of feed production and utilization , 2012 .

[38]  Ernst Worrell,et al.  Energy savings in the nitrogen fertilizer industry in the Netherlands , 1994 .

[39]  G. W. Meindersma,et al.  Implementing membrane technology in the process industry : problems and opportunities , 1996 .

[40]  Chandra P. P. Singh,et al.  Simulation of Ammonia Synthesis Reactors , 1979 .

[41]  N. Lior,et al.  The theory and practice of energy saving in the chemical industry: some methods for reducing thermodynamic irreversibility in chemical technology processes , 2003 .

[42]  Robert U. Ayres,et al.  Accounting for growth: the role of physical work , 2005 .

[43]  Jan Szargut,et al.  Exergy Analysis of Thermal, Chemical, and Metallurgical Processes , 1988 .

[44]  M. H. Panjeshahi,et al.  Retrofit of ammonia plant for improving energy efficiency , 2008 .

[45]  Matthias Beller,et al.  Sustainable metal catalysis with iron: from rust to a rising star? , 2008, Angewandte Chemie.

[46]  K. Denbigh,et al.  The principles of chemical equilibrium : with applications in chemistry and chemical engineering , 1981 .

[47]  George Tsatsaronis,et al.  Comparison of different ammonia synthesis loop configurations with the aid of advanced exergy analysis , 2017 .

[48]  George Tsatsaronis,et al.  Thermoeconomic analysis and optimization of energy systems , 1993 .

[49]  Z. Kravanja,et al.  Heat integration of reactors—I. Criteria for the placement of reactors into process flowsheet , 1988 .

[50]  J. Paris,et al.  Exergy flows analysis in chemical reactors , 1998 .

[51]  M. Mudahar,et al.  Energy efficiency in nitrogen fertilizer production , 1985 .

[52]  Jakob de Swaan Arons,et al.  Denbigh revisited: Reducing lost work in chemical processes , 1995 .

[53]  Akira Murase,et al.  Optimal Thermal Design of an Autothermal Ammonia Synthesis Reactor , 1970 .

[54]  M. Appl.  Ammonia: Principles and Industrial Practice , 1999 .

[55]  Andre Peneloux,et al.  A consistent correction for Redlich-Kwong-Soave volumes , 1982 .