Challenges and opportunities in the recovery of gold from electronic waste

Rapid global technological development has led to the rising production of electronic waste that presents both challenges and opportunities in its recycling. In this review, we highlight the value of metal resources in the printed circuit boards (PCBs) commonly found in end-of-life electronics, the differences between primary (ore) mining applications and secondary (‘urban’) mining, and the variety of metallurgical separations, in particular those that have the potential to selectively and sustainably recover gold from waste PCBs.

[1]  I. O. Ogunniyi,et al.  Chemical composition and liberation characterization of printed circuit board comminution fines for beneficiation investigations. , 2009, Waste management.

[2]  Y. Ghorbani,et al.  The effect of seawater based media on copper dissolution from low-grade copper ore , 2015 .

[3]  Szabolcs Fogarasi,et al.  Technical and environmental assessment of gold recovery from secondary streams obtained in the processing of waste printed circuit boards , 2017 .

[4]  Run‐Wei Li,et al.  Recovery of gold from hydrometallurgical leaching solution of electronic waste via spontaneous reduction by polyaniline , 2017 .

[5]  Di Li,et al.  CORRIGENDUM: The work mechanism and sub-bandgap-voltage electroluminescence in inverted quantum dot light-emitting diodes , 2015, Scientific Reports.

[6]  M C Vats,et al.  Assessment of gold and silver in assorted mobile phone printed circuit boards (PCBs): Original article. , 2015, Waste management.

[7]  Peng Yang,et al.  Environmentally Benign, Rapid, and Selective Extraction of Gold from Ores and Waste Electronic Materials. , 2017, Angewandte Chemie.

[8]  Shafiq Alam,et al.  Recovery of gold and silver from spent mobile phones by means of acidothiourea leaching followed by adsorption using biosorbent prepared from persimmon tannin , 2013 .

[9]  H M Veit,et al.  Evaluation of gold and silver leaching from printed circuit board of cellphones. , 2014, Waste management.

[10]  R. A. Grant,et al.  Solvent extraction: the coordination chemistry behind extractive metallurgy. , 2014, Chemical Society reviews.

[11]  J. Gascón,et al.  Selective Gold Recovery and Catalysis in a Highly Flexible Methionine-Decorated Metal-Organic Framework. , 2016, Journal of the American Chemical Society.

[12]  Zhiru Hu,et al.  The development of unimolecular conjugated polymeric micelles for the highly selective detection and recovery of gold from electronic waste , 2019, New Journal of Chemistry.

[13]  C. Hagelüken,et al.  Recycling of gold from electronics: Cost-effective use through ‘Design for Recycling’ , 2010 .

[14]  S. Syed,et al.  Recovery of gold from secondary sources—A review , 2012 .

[15]  B. D. Pandey,et al.  Selective recovery of gold from waste mobile phone PCBs by hydrometallurgical process. , 2011, Journal of hazardous materials.

[16]  C. Yap,et al.  Electrogenerative gold recovery from cyanide solutions using a flow-through cell with activated reticulated vitreous carbon. , 2008, Chemosphere.

[17]  Ryan P. Lively,et al.  Seven chemical separations to change the world , 2016, Nature.

[18]  A. Velenturf,et al.  Making the business case for resource recovery. , 2019, The Science of the total environment.

[19]  J. F. Stoddart,et al.  Cation-Dependent Gold Recovery with α-Cyclodextrin Facilitated by Second-Sphere Coordination. , 2016, Journal of the American Chemical Society.

[20]  Euan D. Doidge,et al.  Evaluation of Simple Amides in the Selective Recovery of Gold from Secondary Sources by Solvent Extraction , 2019, ACS Sustainable Chemistry & Engineering.

[21]  T. Groenewald.  Potential applications of thiourea in the processing of gold , 1977 .

[22]  Shuliang Yang,et al.  Rapid, Selective Extraction of Trace Amounts of Gold from Complex Water Mixtures with a Metal-Organic Framework (MOF)/Polymer Composite. , 2018, Journal of the American Chemical Society.

[23]  Li Jing-ying,et al.  Thiourea leaching gold and silver from the printed circuit boards of waste mobile phones. , 2012, Waste management.

[24]  Christian Ekberg,et al.  Recovery of precious metals from electronic waste and spent catalysts: A review , 2019, Resources, Conservation and Recycling.

[25]  Jinhui Li,et al.  Current Status on Leaching Precious Metals from Waste Printed Circuit Boards , 2012 .

[26]  Jia Li,et al.  Recycle technology for recovering resources and products from waste printed circuit boards. , 2007, Environmental science & technology.

[27]  Lorenzo Fedrizzi,et al.  Gold recovery from waste electrical and electronic equipment by electrodeposition: A feasibility study , 2015 .

[28]  Sangwon Suh,et al.  Industrial Ecology: The role of manufactured capital in sustainability , 2015, Proceedings of the National Academy of Sciences.

[29]  E. Schelter,et al.  Sustainable Inorganic Chemistry: Metal Separations for Recycling. , 2019, Inorganic chemistry.

[30]  Zhenming Xu,et al.  Electrostatic separation for recovering metals and nonmetals from waste printed circuit board: problems and improvements. , 2008, Environmental science & technology.

[31]  Jie Guo,et al.  Recycling of waste printed circuit boards: a review of current technologies and treatment status in China. , 2009, Journal of hazardous materials.

[32]  B. Moyer,et al.  Challenges to achievement of metal sustainability in our high-tech society. , 2014, Chemical Society reviews.

[33]  Ersin Y Yazici,et al.  Extraction of metals from waste printed circuit boards (WPCBs) in H2SO4–CuSO4–NaCl solutions , 2013 .

[34]  M. Almeida,et al.  Gold recovery with ion exchange used resins , 2001 .

[35]  H. Narita,et al.  Extraction of gold(III) in hydrochloric acid solution using monoamide compounds , 2006 .

[36]  Yingying Qi,et al.  Leaching of Au, Ag, and Pd from waste printed circuit boards of mobile phone by iodide lixiviant after supercritical water pre-treatment. , 2015, Waste management.

[37]  Jan D. Miller,et al.  A REVIEW OF GOLD LEACHING IN ACID THIOUREA SOLUTIONS , 2006 .

[38]  M. Zhou,et al.  A novel approach to separation of waste printed circuit boards using dimethyl sulfoxide , 2013, International Journal of Environmental Science and Technology.

[39]  F. A. Perrot,et al.  Evaluation of submerged bio-oxidation concept for refractory gold ores , 2014 .

[40]  Kuen-Song Lin,et al.  Oxidation of printed circuit board wastes in supercritical water , 2000 .

[41]  M. Kemell,et al.  Pyridinethiol-Assisted Dissolution of Elemental Gold in Organic Solutions. , 2018, Angewandte Chemie.

[42]  P. C. V. Aswegen,et al.  The BIOX™ Process for the Treatment of Refractory Gold Concentrates , 2007 .

[43]  A. Chaturvedi,et al.  The carbon footprint of e-waste recycling - Indian scenarios , 2012, 2012 Electronics Goes Green 2012+.

[44]  Federica Cucchiella,et al.  Recycling of WEEEs: An economic assessment of present and future e-waste streams , 2015 .

[45]  Thomas E. Graedel,et al.  The omnivorous diet of modern technology , 2013 .

[46]  T. Kondrat'eva,et al.  A new concept of the biohydrometallurgical technology for gold recovery from refractory sulfide concentrates , 2016 .

[47]  B. D. Pandey,et al.  Bioleaching of gold and copper from waste mobile phone PCBs by using a cyanogenic bacterium , 2011 .

[48]  M. Bengtsson,et al.  Chemical hazards associated with treatment of waste electrical and electronic equipment. , 2011, Waste management.

[49]  M. Faramarzi,et al.  Metal solubilization from metal-containing solid materials by cyanogenic Chromobacterium violaceum. , 2004, Journal of biotechnology.

[50]  P. Pohl,et al.  The recovery of gold from the aqua regia leachate of electronic parts using a core–shell type anion exchange resin , 2017 .

[51]  Matti Haukka,et al.  Selective Recovery of Gold from Electronic Waste Using 3D-Printed Scavenger , 2017, ACS omega.

[52]  K. C. Sole,et al.  Outer-sphere coordination chemistry: amido-ammonium ligands as highly selective tetrachloridozinc(II)ate extractants. , 2012, Inorganic chemistry.

[53]  Y. Yun,et al.  Biosorbents for recovery of precious metals. , 2014, Bioresource technology.

[54]  Ruediger Kuehr,et al.  The Global E-waste Monitor 2017: Quantities, Flows and Resources , 2015 .

[55]  K. D. Naumov,et al.  Gold Electrowinning from Cyanide Solutions Using Three-Dimensional Cathodes , 2017, Metallurgist.

[56]  M. Goto,et al.  Recovery of gold ions from discarded mobile phone leachate by solvent extraction and polymer inclusion membrane (PIM) based separation using an amic acid extractant , 2019, Separation and Purification Technology.

[57]  van Niekerk,et al.  Recent Advances in the BIOX® Technology , 2009 .

[58]  Gayathri Natarajan,et al.  Engineered strains enhance gold biorecovery from electronic scrap , 2015 .

[59]  James E. Hoffmann,et al.  Recovering precious metals from electronic scrap , 1992 .

[60]  S. M. Mousavi,et al.  Enhancement of simultaneous gold and copper recovery from discarded mobile phone PCBs using Bacillus megaterium: RSM based optimization of effective factors and evaluation of their interactions. , 2016, Waste management.

[61]  E. Tanabe,et al.  Biosorption of gold from computer microprocessor leachate solutions using chitin. , 2015, Waste management.

[62]  Lifeng Zhang,et al.  Metallurgical recovery of metals from electronic waste: a review. , 2008, Journal of hazardous materials.

[63]  Jing Wei Wang,et al.  Investigation on Dissolution of Brominated Epoxy Resin Using Ionic Liquid [Bmim]Cl from Waste Printed Circuit Boards , 2015 .

[64]  D. Dreisinger,et al.  Solvent extraction of copper from chloride solution I: Extraction isotherms , 2013 .

[65]  Corale L. Brierley,et al.  Progress in bioleaching: part B: applications of microbial processes by the minerals industries , 2013, Applied Microbiology and Biotechnology.

[66]  Jinki Jeong,et al.  Thiosulfate leaching of gold from waste mobile phones. , 2010, Journal of hazardous materials.

[67]  P. Breuer,et al.  The importance of controlling oxygen addition during the thiosulfate leaching of gold ores , 2003 .

[68]  E. Mowafy,et al.  Extraction and separation of gold(III) from hydrochloric acid solutions using long chain structurally tailored monoamides , 2016 .

[69]  Helen R. Watling,et al.  The bioleaching of sulphide minerals with emphasis on copper sulphides — A review , 2006 .

[70]  Takehiko Kinoshita,et al.  Metal recovery from non-mounted printed wiring boards via hydrometallurgical processing , 2003 .

[71]  B. Choudhary,et al.  Surface functionalized biomass for adsorption and recovery of gold from electronic scrap and refinery wastewater , 2018 .

[72]  C. Mirkin,et al.  Selective isolation of gold facilitated by second-sphere coordination with α-cyclodextrin , 2013, Nature Communications.

[73]  P. P. Sheng,et al.  Recovery of gold from computer circuit board scrap using aqua regia , 2007, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[74]  Zhenming Xu,et al.  Recycling of non-metallic fractions from waste printed circuit boards: a review. , 2009, Journal of hazardous materials.

[75]  N. A. Roslan,et al.  The use of an electrogenerative process as a greener method for recovery of gold(III) from the E-waste , 2017 .

[76]  Eric Forssberg,et al.  Mechanical recycling of waste electric and electronic equipment: a review. , 2003, Journal of hazardous materials.

[77]  Kamalesh K. Singh,et al.  Liberation of metal clads of waste printed circuit boards by removal of halogenated epoxy resin substrate using dimethylacetamide. , 2017, Waste management.

[78]  Jinki Jeong,et al.  Enrichment of the metallic components from waste printed circuit boards by a mechanical separation process using a stamp mill. , 2009, Waste management.

[79]  Colorado Denver,et al.  INTRODUCTION TO EVALUATION, DESIGN AND OPERATION OF PRECIOUS METAL HEAP LEACHING PROJECTS , 1988 .

[80]  Szabolcs Fogarasi,et al.  Copper recovery and gold enrichment from waste printed circuit boards by mediated electrochemical oxidation. , 2014, Journal of hazardous materials.

[81]  Kamalesh K. Singh,et al.  Dissolution and separation of brominated epoxy resin of waste printed circuit boards by using di-methyl formamide , 2016 .

[82]  Hong Yong Sohn,et al.  A process for extracting precious metals from spent printed circuit boards and automobile catalysts , 2004 .

[83]  Helen R. Watling,et al.  Microbiological Advances in Biohydrometallurgy , 2016 .

[84]  Jae-chun Lee,et al.  A Novel Process for Extracting Precious Metals from Spent Mobile Phone PCBs and Automobile Catalysts , 2013 .

[85]  Marianne Bigum,et al.  Metal recovery from high-grade WEEE: a life cycle assessment. , 2012, Journal of hazardous materials.

[86]  Sushant B. Wath,et al.  Separation of WPCBs by dissolution of brominated epoxy resins using DMSO and NMP: A comparative study , 2015 .

[87]  M. Colledani,et al.  Advances in Recovering Noble Metals from Waste Printed Circuit Boards (WPCBs) , 2018, ACS Sustainable Chemistry & Engineering.

[88]  Euan D. Doidge,et al.  A Simple Primary Amide for the Selective Recovery of Gold from Secondary Resources. , 2016, Angewandte Chemie.

[89]  Elaine Y. L. Sum,et al.  The recovery of metals from electronic scrap , 1991 .

[90]  Jae-Min Yoo,et al.  Present status of the recycling of waste electrical and electronic equipment in Korea , 2007 .

[91]  D. Fray,et al.  Recovery of high purity precious metals from printed circuit boards. , 2009, Journal of hazardous materials.

[92]  Muammer Kaya,et al.  Recovery of metals and nonmetals from electronic waste by physical and chemical recycling processes. , 2016, Waste management.

[93]  Arda Işıldar,et al.  Two-step bioleaching of copper and gold from discarded printed circuit boards (PCB). , 2016, Waste management.

[94]  Euan D. Doidge,et al.  Anion Receptor Design: Exploiting Outer-Sphere Coordination Chemistry To Obtain High Selectivity for Chloridometalates over Chloride. , 2015, Inorganic chemistry.

[95]  Andrea Alzate,et al.  Recovery of gold from waste electrical and electronic equipment (WEEE) using ammonium persulfate. , 2016, Waste management.