Permanent magnet flux switching machines — Topologies, analysis and optimization

Permanent magnet flux switching machines have been attracting revived research interests for various applications over the last decades. Those machines not only inherit most merits from the conventional permanent magnet synchronous machines but also possess a simple passive and hence robust rotor. In this paper, a comprehensive overview on the evolution of new topologies for the permanent magnet flux switching (PMFS) rotary and linear machines is presented, and performance analysis and optimization of such machines are reviewed. Particular emphasis has been placed on practical techniques of torque/force pulsation analysis and reduction. The pros and cons of those PMFS machines are appraised so as to highlight the prospective applications.

[1]  Z. Q. Zhu,et al.  Saliency investigation of switched-flux PM brushless AC machine for saliency-tracking-based sensorless control , 2012, 2012 XXth International Conference on Electrical Machines.

[2]  Sang-Yong Jung,et al.  Reduction on Cogging Torque in Flux-Switching Permanent Magnet Machine by Teeth Notching Schemes , 2012, IEEE Transactions on Magnetics.

[3]  J. T. Chen,et al.  Optimization and Comparison of Novel E-Core and C-Core Linear Switched Flux PM Machines , 2011, IEEE Transactions on Magnetics.

[4]  E. A. Lomonova,et al.  Analytical modeling of flux-switching machines using variable global reluctance networks , 2012, 2012 XXth International Conference on Electrical Machines.

[5]  Chris Gerada,et al.  A comparative study of permanent magnet - synchronous and permanent magnet - flux switching machines for fault tolerant drive systems , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[6]  Z. Q. Zhu,et al.  Switched flux permanent magnet machines — Innovation continues , 2011, 2011 International Conference on Electrical Machines and Systems.

[7]  D. Howe,et al.  Influence of design parameters on output torque of flux-switching permanent magnet machines , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[8]  D. Howe,et al.  Eddy Current Loss in the Frame of a Flux-Switching Permanent Magnet Machine , 2006, IEEE Transactions on Magnetics.

[9]  Z. Q. Zhu,et al.  Novel Modular-Rotor Switched-Flux Permanent Magnet Machines , 2012, IEEE Transactions on Industry Applications.

[10]  Wei Hua,et al.  Post-fault operation of redundant flux-switching permanent-magnet motors using harmonic injected current , 2010, 2010 International Conference on Electrical Machines and Systems.

[11]  D. Howe,et al.  Optimal combination of stator and rotor pole numbers in flux-switching PM brushless AC machines , 2008, 2008 International Conference on Electrical Machines and Systems.

[12]  Jian-Xin Shen,et al.  A novel permanent magnet flux-switching linear motor , 2008 .

[13]  D. Howe,et al.  Stator and Rotor Pole Combinations for Multi-Tooth Flux-Switching Permanent-Magnet Brushless AC Machines , 2008, IEEE Transactions on Magnetics.

[14]  J.X. Shen,et al.  Novel Permanent Magnet Switching Flux Motors , 2006, Proceedings of the 41st International Universities Power Engineering Conference.

[15]  E. Sulaiman,et al.  Design improvement and performance analysis of 12Slot-10Pole permanent magnet flux switching machine with field excitation coils , 2011, 2011 5th International Power Engineering and Optimization Conference.

[16]  Chris Mi,et al.  A hybrid excitation flux-switching permanent magnet linear motor for urban rail transit , 2011, 2011 IEEE Vehicle Power and Propulsion Conference.

[17]  D. Howe,et al.  Analysis of electromagnetic performance of flux-switching permanent-magnet Machines by nonlinear adaptive lumped parameter magnetic circuit model , 2005, IEEE Transactions on Magnetics.

[18]  Z. Zhu,et al.  Winding Configurations and Optimal Stator and Rotor Pole Combination of Flux-Switching PM Brushless AC Machines , 2010, IEEE Transactions on Energy Conversion.

[19]  M. Gabsi,et al.  Fault diagnosis using vibration measurements of a Flux-Switching permanent magnet motor , 2010, 2010 IEEE International Symposium on Industrial Electronics.

[20]  J T Chen,et al.  A Novel E-Core Switched-Flux PM Brushless AC Machine , 2011, IEEE Transactions on Industry Applications.

[21]  Zhiquan Deng,et al.  A Parallel Hybrid Excitation Flux-Switching Generator DC Power System Based on Direct Torque Linear Control , 2012, IEEE Transactions on Energy Conversion.

[22]  Hongyun Jia,et al.  Stator-Flux-Oriented Fault-Tolerant Control of Flux-Switching Permanent-Magnet Motors , 2011, IEEE Transactions on Magnetics.

[23]  Z. Zhu,et al.  Influence of the Rotor Pole Number on Optimal Parameters in Flux-Switching PM Brushless AC Machines by the Lumped-Parameter Magnetic Circuit Model , 2010 .

[24]  Z.Q. Zhu,et al.  Flux-switching PM brushless machines with alternative stator and rotor pole combinations , 2008, 2008 International Conference on Electrical Machines and Systems.

[25]  Minqiang Hu,et al.  Study on a Long Primary Flux-Switching Permanent Magnet Linear Motor for Electromagnetic Launch Systems , 2012, IEEE Transactions on Plasma Science.

[26]  Z.Q. Zhu,et al.  Analysis and Optimization of Back EMF Waveform of a Flux-Switching Permanent Magnet Motor , 2008, IEEE Transactions on Energy Conversion.

[27]  Ronghai Qu,et al.  Optimal split ratio in Switched Flux Permanent Magnet machines , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[28]  E. Hoang,et al.  Thermal-electromagnetic analysis of a fault-tolerant dual-star flux-switching permanent magnet motor for critical applications , 2011 .

[29]  G. Jewell,et al.  Proximity Loss Study In High Speed Flux-Switching Permanent Magnet Machine , 2009, IEEE Transactions on Magnetics.

[30]  Hongyun Jia,et al.  Modeling of flux-switching permanent magnet motor drives using transient field-circuit co-simulation method , 2008, 2008 International Conference on Electrical Machines and Systems.

[31]  Chen Kun,et al.  Three-dimensional magnetic field analysis and expertiment research of flux-switching permanent magnet machine , 2011, Proceedings 2011 International Conference on Transportation, Mechanical, and Electrical Engineering (TMEE).

[32]  Wei Hua,et al.  Inductance characteristics of 3-phase flux-switching permanent magnet machine with doubly-salient structure , 2006, 2006 CES/IEEE 5th International Power Electronics and Motion Control Conference.

[33]  Weizhong Fei,et al.  A Novel Permanent-Magnet Flux Switching Machine With an Outer-Rotor Configuration for In-Wheel Light Traction Applications , 2012, IEEE Transactions on Industry Applications.

[34]  D. Howe,et al.  Comparative study of flux-switching and interior permanent magnet machines , 2007, 2007 International Conference on Electrical Machines and Systems (ICEMS).

[35]  D. Howe,et al.  Modeling of end-effect in flux-switching permanent magnet machines , 2007, 2007 International Conference on Electrical Machines and Systems (ICEMS).

[36]  E. Hoang,et al.  Improved output power capability of Hybrid Excited Flux-Switching DC-Alternators: Analysis and experiments , 2012, 2012 IEEE International Conference on Industrial Technology.

[37]  Nobuyuki Matsui,et al.  Parameter optimization study and performance analysis of 6S-8P permanent magnet flux switching machine with field excitation for high speed hybrid electric vehicles , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[38]  E. Hoang,et al.  A new structure of a switching flux synchronous polyphased machine with hybrid excitation , 2007, 2007 European Conference on Power Electronics and Applications.

[39]  E. Sulaiman,et al.  Preliminary studies on a new outer-rotor permanent magnet flux switching machine with hybrid excitation flux for direct drive EV applications , 2012, 2012 IEEE International Conference on Power and Energy (PECon).

[40]  E. A. Lomonova,et al.  Sensitivity analysis for phase inductances in Flux-Switching PM machines , 2012, 2012 XXth International Conference on Electrical Machines.

[41]  Xinghuo Yu,et al.  Theoretical Research on New Laminated Structure Flux Switching Permanent Magnet Machine for Novel Topologic Plug-In Hybrid Electrical Vehicle , 2012, IEEE Transactions on Magnetics.

[42]  Mohamed Gabsi,et al.  Double and single layers flux-switching permanent magnet motors: Fault tolerant model for critical applications , 2011, 2011 International Conference on Electrical Machines and Systems.

[43]  Wei Hua,et al.  Flux-regulation capability of hybrid-excited flux-switching machines , 2012, 2012 XXth International Conference on Electrical Machines.

[44]  N. Matsui,et al.  Design optimization of 12Slot-10Pole hybrid excitation flux switching synchronous machine with 0.4kg permanent magnet for hybrid electric vehicles , 2011, 8th International Conference on Power Electronics - ECCE Asia.

[45]  Chris Gerada,et al.  Novel fault tolerant design of flux switching machines , 2010 .

[46]  C. Pollock,et al.  A permanent magnet flux switching motor for low energy axial fans , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[47]  Geraint W. Jewell,et al.  Multiphase Flux-Switching Permanent-Magnet Brushless Machine for Aerospace Application , 2008, IEEE Transactions on Industry Applications.

[48]  M. Hasegawa,et al.  Comparative study of torque-speed characteristics of alternate switched-flux permanent magnet machine topologies , 2012 .

[49]  N. Matsui,et al.  High Power Density Design of 6-Slot–8-Pole Hybrid Excitation Flux Switching Machine for Hybrid Electric Vehicles , 2011, IEEE Transactions on Magnetics.

[50]  Jian-Xin Shen,et al.  Cogging torque suppression in a permanentmagnet flux-switching integrated-starter-generator , 2010 .

[51]  A. Gensior,et al.  Torque ripple reduction based on current control for a flux switching permanent magnet machine , 2012, International Symposium on Power Electronics Power Electronics, Electrical Drives, Automation and Motion.

[52]  Johannes J. H. Paulides,et al.  Modeling of Flux Switching Permanent Magnet Machines With Fourier Analysis , 2010, IEEE Transactions on Magnetics.

[53]  Xiping Liu,et al.  Design of a stator-separated axial flux-switching hybrid excitation synchronous machine , 2011 .

[54]  Z.Q. Zhu,et al.  Hybrid excited flux-switching permanent magnet machines , 2009, 2009 13th European Conference on Power Electronics and Applications.

[55]  Wei Xu,et al.  Research on fault diagnosis and tolerant operation of redundant flux-switching permanent-magnet motors , 2011, 2011 International Conference on Applied Superconductivity and Electromagnetic Devices.

[56]  Jianning Dong,et al.  Analysis of the Oversaturated Effect in Hybrid Excited Flux-Switching Machines , 2011, IEEE Transactions on Magnetics.

[57]  Hongyun Jia,et al.  Investigation and Implementation of Control Strategies for Flux-Switching Permanent Magnet Motor Drives , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[58]  Weizhong Fei,et al.  Permanent-Magnet Flux-Switching Integrated Starter Generator With Different Rotor Configurations for Cogging Torque and Torque Ripple Mitigations , 2011, IEEE Transactions on Industry Applications.

[59]  Hongyun Jia,et al.  Torque Ripple Suppression in Flux-Switching PM Motor by Harmonic Current Injection Based on Voltage Space-Vector Modulation , 2010, IEEE Transactions on Magnetics.

[60]  S. E. Rauch,et al.  Design Principles of Flux-Switch Alternators [includes discussion] , 1955, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems.

[61]  Bing Xia,et al.  A Modular Permanent-Magnet Flux-Switching Linear Machine With Fault-Tolerant Capability , 2009, IEEE Transactions on Magnetics.

[62]  Ming Cheng,et al.  Control and operation of fault-tolerant flux-switching permanent-magnet motor drive with second harmonic current injection , 2012 .

[63]  J.X. Shen,et al.  Comparative Study and Optimal Design of PM Switching Flux Motors , 2006, Proceedings of the 41st International Universities Power Engineering Conference.

[64]  Jian-Xin Shen,et al.  Design and analysis of a novel flux-switching permanent magnet integrated-starter-generator , 2008 .

[65]  Z. Zhu,et al.  Hybrid-Excited Flux-Switching Permanent-Magnet Machines With Iron Flux Bridges , 2010, IEEE Transactions on Magnetics.

[66]  Nobuyuki Matsui,et al.  A novel hybrid excitation flux switching synchronous machine for a high-speed hybrid electric vehicle applications , 2011, 2011 International Conference on Electrical Machines and Systems.

[67]  Jiabin Wang,et al.  Design Considerations for Tubular Flux-Switching Permanent Magnet Machines , 2008, IEEE Transactions on Magnetics.

[68]  L. Parsa,et al.  Double-sided flux-switching linear synchronous machine with yokeless translator , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[69]  Chris Gerada,et al.  A fault-tolerant control scheme for a dual flux-switching permanent magnet motor drive , 2011, 2011 International Conference on Electrical Machines and Systems.

[70]  Nobuyuki Matsui,et al.  Design of 12-slot 10-pole Permanant Magnet Flux-Switching Machine with hybrid excitation for hybrid electric vehicle , 2010 .

[71]  Minqiang Hu,et al.  A Novel Flux-Switching Permanent-Magnet Linear Generator for Wave Energy Extraction Application , 2011, IEEE Transactions on Magnetics.

[72]  Gan Zhang,et al.  A Novel Hybrid Excitation Flux-Switching Motor for Hybrid Vehicles , 2009, IEEE Transactions on Magnetics.

[73]  G. Jewell,et al.  Cogging Torque in Flux-Switching Permanent Magnet Machines , 2009, IEEE Transactions on Magnetics.

[74]  Z.Q. Zhu,et al.  Alternate Poles Wound Flux-Switching Permanent-Magnet Brushless AC Machines , 2010, IEEE Transactions on Industry Applications.

[75]  Hongyun Jia,et al.  Compensation of cogging torque for flux-switching permanent magnet motor based on current harmonics injection , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[76]  E. Sulaiman,et al.  Design studies on high torque and high power density hybrid excitation flux switching synchronous motor for HEV applications , 2012, 2012 IEEE International Power Engineering and Optimization Conference Melaka, Malaysia.

[77]  R. Deodhar,et al.  Comparison of losses and efficiency in alternate flux-switching permanent magnet machines , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[78]  M Gabsi,et al.  3-D thermal model of an hybrid excitation flux switching synchronous machine using a 2-D FE method software , 2010, SPEEDAM 2010.

[79]  J. T. Chen,et al.  Comparison of All- and Alternate-Poles-Wound Flux-Switching PM Machines Having Different Stator and Rotor Pole Numbers , 2010 .

[80]  D. Howe,et al.  Starting Torque of Single-Phase Flux-Switching Permanent Magnet Motors , 2006, INTERMAG 2006 - IEEE International Magnetics Conference.

[81]  Wei Xu,et al.  Electromagnetic design and performance evaluation on 75 kW axially laminated flux switching permanent magnet machine , 2011, 2011 International Conference on Electrical Machines and Systems.

[82]  Z. Q. Zhu,et al.  Optimization of linear flux switching permanent magnet motor , 2010, 2010 IEEE Vehicle Power and Propulsion Conference.

[83]  Wei Hua,et al.  Cogging torque reduction of flux-switching permanent magnet machines without skewing , 2008, 2008 International Conference on Electrical Machines and Systems.

[84]  Li Hao,et al.  Fault-Tolerant Performance of a Novel Flux-Switching Permanent Magnet Linear Machine Based on Harmonic Current Injection , 2011, IEEE Transactions on Magnetics.

[85]  L. Parsa,et al.  Thrust optimization of a five-phase fault-tolerant flux-switching linear synchronous motor , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.

[86]  E. Hoang,et al.  A new hybrid-excited flux-switching machine with excitation coils in stator slots , 2012, 2012 15th International Conference on Electrical Machines and Systems (ICEMS).

[87]  Xin Wang,et al.  Modeling of a Complementary and Modular Linear Flux-Switching Permanent Magnet Motor for Urban Rail Transit Applications , 2012, IEEE Transactions on Energy Conversion.

[88]  Z. Zhu,et al.  Advanced Flux-Switching Permanent Magnet Brushless Machines , 2010, IEEE Transactions on Magnetics.

[89]  Z. Zhu,et al.  A Novel Axial Field Flux-Switching Permanent Magnet Wind Power Generator , 2011, IEEE Transactions on Magnetics.

[90]  Zhiquan Deng,et al.  Comparison of Hybrid Excitation Topologies for Flux-Switching Machines , 2012, IEEE Transactions on Magnetics.

[91]  Li Hao,et al.  Reduction of Cogging Force in a Linear Flux-Switching Permanent-Magnet Brushless AC Machine for Direct-Drive Applications , 2011, IEEE Transactions on Magnetics.

[92]  Z.Q. Zhu,et al.  Design of Flux-Switching Permanent Magnet Machine Considering the Limitation of Inverter and Flux-Weakening Capability , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[93]  R. Deodhar,et al.  Comparison of flux weakening capability in alternative switched flux permanent magnet machines by mechanical adjusters , 2012, 2012 XXth International Conference on Electrical Machines.

[94]  Mingyao Lin,et al.  Analysis and optimization of EMF waveform of a novel axial field flux-switching permanent magnet machine , 2011, 2011 International Conference on Electrical Machines and Systems.

[95]  N. Bianchi,et al.  Performance comparison between switching-flux and IPM machine with rare earth and ferrite PMs , 2012, 2012 XXth International Conference on Electrical Machines.

[96]  Hongyun Jia,et al.  Back-EMF Harmonic Analysis and Fault-Tolerant Control of Flux-Switching Permanent-Magnet Machine With Redundancy , 2011, IEEE Transactions on Industrial Electronics.

[97]  E. Karaman,et al.  Multilayer-Winding Versus Switched-Flux Permanent-Magnet AC Machines for Gearless Applications in Clean-Energy Systems , 2012, IEEE Transactions on Industry Applications.

[98]  D. Howe,et al.  Analysis of a Novel Multi-Tooth Flux-Switching PM Brushless AC Machine for High Torque Direct-Drive Applications , 2008, IEEE Transactions on Magnetics.

[99]  J. Shen,et al.  A Method to Segregate Detent Force Components in Permanent-Magnet Flux-Switching Linear Machines , 2012, IEEE Transactions on Magnetics.

[100]  D. Howe,et al.  Analysis and reduction of magnet eddy current loss in flux-switching permanent magnet machines , 2008 .

[101]  Arne Nysveen,et al.  Investigation of a three-phase flux-switching permanent magnet machine for downhole applications , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[102]  Wei Xu,et al.  Cogging torque reduction for radially laminated flux-switching permanent magnet machine with 12/14 poles , 2011, IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society.

[103]  P.C.K. Luk,et al.  A novel outer-rotor permanent-magnet flux-switching machine for urban electric vehicle propulsion , 2009, 2009 3rd International Conference on Power Electronics Systems and Applications (PESA).

[104]  H. Polinder,et al.  Torque enhanced Flux-Switching PM machine for aerospace applications , 2012, 2012 XXth International Conference on Electrical Machines.

[105]  Ilhem Slama-Belkhodja,et al.  Five-Phase Flux Switching Machine: Optimal current waveforms in order to improve open phase operation , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.

[106]  Chen Wang,et al.  Operation principle and topology structures of axial flux-switching hybrid excitation synchronous machine , 2011, 2011 International Conference on Electrical Machines and Systems.

[107]  B. Mecrow,et al.  Permanent-Magnet Flux-Switching Synchronous Motor Employing a Segmental Rotor , 2012, IEEE Transactions on Industry Applications.

[108]  J. B. Wang,et al.  Mechanically adjusted variable-flux concept for switched-flux permanent-magnet machines , 2011, 2011 International Conference on Electrical Machines and Systems.

[109]  Hongyun Jia,et al.  A new stator-flux orientation strategy for flux-switching permanent motor drive based on voltage space-vector , 2008, 2008 International Conference on Electrical Machines and Systems.

[110]  Jian-Xin Shen,et al.  A New Method for Reduction of Detent Force in Permanent Magnet Flux-Switching Linear Motors , 2009, IEEE Transactions on Magnetics.

[111]  Kaiyuan Lu,et al.  Single-Phase Hybrid Switched Reluctance Motor for Low-Power Low-Cost Applications , 2011, IEEE Transactions on Magnetics.

[112]  Wei Hua,et al.  Electromagnetic performance analysis of hybrid-excited flux-switching machines for electrical vehicles by an improved magnetic network model , 2010, 2010 IEEE Vehicle Power and Propulsion Conference.

[113]  Chris Gerada,et al.  Fault tolerant winding technology comparison for Flux Switching Machine , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[114]  D. Howe,et al.  A dual-lumped parameter magnetic circuit model accounting for the cross-coupling effect, with particular reference to flux-switching permanent magnet machines , 2008 .

[115]  Ming Cheng,et al.  Quantitative Comparison of Flux-Switching Permanent-Magnet Motors With Interior Permanent Magnet Motor for EV, HEV, and PHEV Applications , 2012, IEEE Transactions on Magnetics.

[116]  Jianning Dong,et al.  Electromagnetic Performance Analysis of Hybrid-Excited Flux-Switching Machines by a Nonlinear Magnetic Network Model , 2011, IEEE Transactions on Magnetics.

[117]  Ziqiang Zhu,et al.  A Novel Hybrid-Excited Switched-Flux Brushless AC Machine for EV/HEV Applications , 2011, IEEE Transactions on Vehicular Technology.

[118]  D. Howe,et al.  Investigation of iron loss in flux-switching PM machines , 2008 .

[119]  Yu Wang,et al.  A Position Sensorless Method for Direct Torque Control With Space Vector Modulation of Hybrid Excitation Flux-Switching Generator , 2012, IEEE Transactions on Energy Conversion.

[120]  Xinghe Fu,et al.  Novel Dual-Rotor Axial Field Flux-Switching Permanent Magnet Machine , 2012, IEEE Transactions on Magnetics.

[121]  Minqiang Hu,et al.  Nonlinear Equivalent Magnetic Circuit Analysis for Linear Flux-Switching Permanent Magnet Machines , 2012, IEEE Transactions on Magnetics.

[122]  M. Sanada,et al.  Power characteristics of a permanent magnet flux switching generator for a low-speed wind turbine , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

[123]  Hongyun Jia,et al.  Comparative Study of Flux-Switching and Doubly-Salient PM Machines Particularly on Torque Capability , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[124]  Chris Gerada,et al.  Design Considerations for a Fault-Tolerant Flux-Switching Permanent-Magnet Machine , 2011, IEEE Transactions on Industrial Electronics.

[125]  Zhe Chen,et al.  Comparison of Stator-Mounted Permanent-Magnet Machines Based on a General Power Equation , 2009, IEEE Transactions on Energy Conversion.

[126]  Wei Hua,et al.  Analysis of flux-switching permanent-magnet machine by nonlinear magnetic network model with bypass-bridges , 2010, 2010 International Conference on Electrical Machines and Systems.

[127]  M. Gabsi,et al.  Design of a Flux-Switching Electrical Generator for Wind Turbine Systems , 2012, IEEE Transactions on Industry Applications.

[128]  Hongyun Jia,et al.  A redundant flux-switching permanent magnet motor drive for fault-tolerant applications , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[129]  Ming Cheng,et al.  Remedial Injected-Harmonic-Current Operation of Redundant Flux-Switching Permanent-Magnet Motor Drives , 2013, IEEE Transactions on Industrial Electronics.

[130]  M. Molinas,et al.  Design of an arch-shaped FSPM Generator for the Seaquest Concept , 2012, 2012 XXth International Conference on Electrical Machines.

[131]  Sami Hlioui,et al.  Experimental comparison of lamination material case of switching flux synchronous machine with hybrid excitation , 2009, 2009 13th European Conference on Power Electronics and Applications.

[132]  Z. Q. Zhu,et al.  Influence of end-effect and cross-coupling on torque-speed characteristics of switched flux permanent magnet machines , 2011, 8th International Conference on Power Electronics - ECCE Asia.

[133]  Mohamed Gabsi,et al.  Thermal–Electromagnetic Analysis for Driving Cycles of Embedded Flux-Switching Permanent-Magnet Motors , 2012, IEEE Transactions on Vehicular Technology.

[134]  Wei Hua,et al.  Overview of Stator-Permanent Magnet Brushless Machines , 2011, IEEE Transactions on Industrial Electronics.

[135]  Mingyao Lin,et al.  Static Characteristics Analysis and Experimental Study of a Novel Axial Field Flux-Switching Permanent Magnet Generator , 2012, IEEE Transactions on Magnetics.

[136]  Wei Xu,et al.  New Axial Laminated-Structure Flux-Switching Permanent Magnet Machine With 6/7 Poles , 2011, IEEE Transactions on Magnetics.

[137]  K. Hameyer,et al.  Sizing-designing procedure of the permanent magnet flux-switching machine based on a simplified analytical model , 2012, 2012 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM).

[138]  D. Howe,et al.  Optimization of multi-tooth flux-switching PM brushless ac machines , 2008, 2008 18th International Conference on Electrical Machines.

[139]  M. Hasegawa,et al.  Comparison of alternate mechanically adjusted variable flux switched flux permanent magnet machines , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[140]  Z. Q. Zhu,et al.  Individual and global optimization of switched flux permanent magnet motors , 2011, 2011 International Conference on Electrical Machines and Systems.

[141]  D. Howe,et al.  Three-Dimensional Lumped-Parameter Magnetic Circuit Analysis of Single-Phase Flux-Switching Permanent-Magnet Motor , 2008, IEEE Transactions on Industry Applications.

[142]  D. Howe,et al.  Novel linear flux-switching permanent magnet machines , 2008, 2008 International Conference on Electrical Machines and Systems.

[143]  Zhiquan Deng,et al.  A Multi-Tooth Fault-Tolerant Flux-Switching Permanent-Magnet Machine With Twisted-Rotor , 2012, IEEE Transactions on Magnetics.

[144]  Hongyun Jia,et al.  Remedial operation of a fault-tolerant flux-switching permanent magnet motor for electric vehicle applications , 2010, 2010 IEEE Vehicle Power and Propulsion Conference.

[145]  J.X. Shen,et al.  Sensorless control and initial position estimation of permanent magnet flux switching motor , 2007, 2007 International Conference on Electrical Machines and Systems (ICEMS).

[146]  Geraint W. Jewell,et al.  Comparison of flux switching and surface mounted permanent magnet generators for high-speed applications , 2011 .

[147]  Johannes J. H. Paulides,et al.  Analytical Hybrid Model for Flux Switching Permanent Magnet Machines , 2010, IEEE Transactions on Magnetics.

[148]  D. C. J. Krop,et al.  Analysis of a novel double sided flux switching linear motor topology , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[149]  Heyun Lin,et al.  Magnetic field analysis of a novel flux switching transverse flux permanent magnet wind generator with 3-D FEM , 2009, 2009 International Conference on Power Electronics and Drive Systems (PEDS).

[150]  J. T. Chen,et al.  Influence of Slot Opening on Optimal Stator and Rotor Pole Combination and Electromagnetic Performance of Switched-Flux PM Brushless AC Machines , 2011, IEEE Transactions on Industry Applications.

[151]  Jian-Xin Shen,et al.  Torque Analysis of Permanent-Magnet Flux Switching Machines With Rotor Step Skewing , 2012, IEEE Transactions on Magnetics.

[152]  Zhiquan Deng,et al.  Improved Stator Flux Estimation Method for Direct Torque Linear Control of Parallel Hybrid Excitation Switched-Flux Generator , 2012, IEEE Transactions on Energy Conversion.

[153]  Qinfen Lu,et al.  Performance investigation of multi-tooth flux-switching PM linear motor , 2011, 2011 International Conference on Electrical Machines and Systems.

[154]  L. Encica,et al.  Tooth contour method implementation for the flux-switching PM machines , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[155]  Jian-Xin Shen,et al.  Cogging torque reduction in permanent magnet flux-switching machines by rotor teeth axial pairing , 2010 .

[156]  Cheng-Tsung Liu,et al.  Design and Analysis of a Novel Hybrid Excited Linear Flux Switching Permanent Magnet Motor , 2012, IEEE Transactions on Magnetics.

[157]  Arne Nysveen,et al.  Analytical design of a high-torque flux-switching permanent magnet machine by a simplified lumped parameter magnetic circuit model , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[158]  J.X. Shen,et al.  Comparison and study of 6/5- and 12/10-pole permanent magnet flux-switching motors considering flux-weakening capability , 2008, 2008 International Conference on Electrical Machines and Systems.

[159]  R. Nilssen,et al.  Characteristic investigations of a new three-phase flux-switching permanent magnet machine by FEM simulations and experimental verification , 2009, 2009 International Conference on Electrical Machines and Systems.