Mechanical properties and deformation behaviour of a niobium alloy with different carbon contents

[1]  Ian P. Jones,et al.  Microstructures and mechanical properties of Nb–Ti–C alloys , 2008 .

[2]  I. Jones,et al.  Effect of carbon on the microstructures and mechanical properties of as cast Nb-base alloy , 2008 .

[3]  I. Jones,et al.  Observation of tension/compression asymmetry in an Nb–Al–V alloy , 2004 .

[4]  Jenn‐Ming Yang,et al.  High temperature mechanical behavior of Nb–Mo–ZrC alloys , 2003 .

[5]  S. Hanada,et al.  Effect of carbon on microstructure and high-temperature strength of NbMoTiSi in situ composites prepared by arc-melting and directional solidification , 2003 .

[6]  T. Rong.  Serrated yielding in the B2-ordered Nb–15Al–20V alloy , 2003 .

[7]  Yujun Qin,et al.  Subgrain structure during annealing and creep of the cast martensitic Cr-steel G-X12CrMoWVNbN 10-1-1 , 2003 .

[8]  Jenn‐Ming Yang,et al.  Effect of alloy composition on microstructure and high temperature properties of Nb–Zr–C ternary alloys , 2003 .

[9]  K. Chan.  Alloying effects on fracture mechanisms in Nb-based intermetallic in-situ composites , 2002 .

[10]  S. Forest,et al.  Subgrain formation during deformation: Physical origin and consequences , 2002 .

[11]  M. Aindow,et al.  Microstructure and mechanical behaviour of Nb–Al–V alloys with 10–25 at.% Al and 20–40 at.% V—II: mechanical behaviour and deformation mechanisms , 2002 .

[12]  Won-Yong Kim,et al.  Microstructure and room temperature fracture toughness of Nbss/Nb5Si3 in situ composites , 2001 .

[13]  N. Nomura,et al.  Mechanical Properties of Mo–Nb–TiC In-situ Composites Synthesized by Hot-Pressing , 2000 .

[14]  R. Tanaka.  Research and development of ultra-high temperature materials in Japan , 2000 .

[15]  久男 田中,et al.  Nb-X合金 (X=Ta, V, Mo, W) の固溶強化および高温圧縮特性 , 2000 .

[16]  H. Fraser,et al.  On the discontinuous yielding phenomena observed in a NbTiAl alloy , 1998 .

[17]  M. Aindow,et al.  Microstructures and deformation behaviour in Nb/10–25at.% Al/20–40at.%V alloys , 1997 .

[18]  V. Sikka,et al.  Characteristics of a multicomponent Nb–Ti–Al alloy via industrial-scale practice , 1997 .

[19]  S. Banerjee,et al.  Plastic instability in an omega forming Ti-15% Mo alloy , 1996 .

[20]  A. Heuer,et al.  Slip systems and dislocation emission from crack tips in single crystal TiC at low temperatures , 1996 .

[21]  D. Pope,et al.  In-situ refractory intermetallic-based composites , 1995 .

[22]  H. Fraser,et al.  Pseudo-Twinning in A Deformed Nb-15Al-25Ti B2 Alloy , 1994 .

[23]  D. Shah,et al.  Ductile Phase Toughening of Brittle Intermetallics , 1990 .

[24]  A. van den Beukel,et al.  Theory of the effect of dynamic strain aging on mechanical properties , 1975 .

[25]  G. E. Hollox,et al.  Plastic Behavior of Titanium Carbide , 1966 .

[26]  A. Cottrell,et al.  LXXXVI. A note on the Portevin-Le Chatelier effect , 1953 .