Dielectric properties in microwave remote plasma sustained in argon: Expanding plasma conditions

This work is devoted to the study of the relative permittivity in argon expanding plasma produced below a microwave discharge sustained in a quartz tube and working at 2.45 GHz. We discuss results and explain the microwave propagation within the reactor, outside the quartz tube. It is shown that at low pressures (133 Pa) and at powers ranging from 100 W to 400 W, the wave frequency remains lower than the plasma frequency anywhere in the expanding plasma. Under these conditions, the real part of the relative permittivity is negative and the wave is reflected. Surprisingly, in these conditions, the plasma is produced inside and outside the quartz tube, below the wave launcher. This effect can be explained considering a surface wave propagating at the surface of the quartz tube then into the reactor, on the external surface of the expanding plasma below the quartz tube.

[1]  A. Bessaudou,et al.  Expanding microwave plasma process for thin molybdenum films nitriding: Nitrogen diffusion and structure investigations , 2011 .

[2]  P. Pohl,et al.  Recent achievements in chemical hydride generation inductively coupled and microwave induced plasmas with optical emission spectrometry detection , 2011 .

[3]  Yang Li,et al.  Preparation and Processing of PZT Thin Film by Liquid Mist Microwave Plasma Enhanced Chemical Vapour Deposition , 2011 .

[4]  C. Jiménez-Sanchidrián,et al.  Transformation of light paraffins in a microwave-induced plasma-based reactor at reduced pressure , 2010 .

[5]  I. Jauberteau,et al.  Plasma parameters deduced from cylindrical probe measurements: determination of the electron density at the ion saturation current , 2008 .

[6]  I. Jauberteau,et al.  Determination of the electron energy distribution function in the plasma by means of numerical simulations of multiple harmonic components on a Langmuir probe characteristic—measurements in expanding microwave plasma , 2007 .

[7]  I. Jauberteau,et al.  Electron energy distribution function in plasma determined using numerical simulations of multiple harmonic components on Langmuir probe characteristic: efficiency of the method. , 2007, The Review of scientific instruments.

[8]  A. Forbes,et al.  Radial Variation of Refractive Index, Plasma Frequency and Phase Velocity in Laser Induced Air Plasma , 2006, IEEE Transactions on Plasma Science.

[9]  H. Sugai,et al.  Transition of electron heating mode in a planar microwave discharge at low pressures , 2000 .

[10]  M. Semeria,et al.  Plasma nitriding of thin molybdenum layers at low temperature , 1999 .

[11]  M. J. Cinelli,et al.  A spatially resolved plasma diagnostic in an expanding microwave discharge containing an Ar- gas mixture: uniformity and stability of the discharge , 1999 .

[12]  M. Nagatsu,et al.  High-density flat plasma production based on surface waves , 1998 .

[13]  M. J. Cinelli,et al.  Characterization of a microwave plasma jet containing Ar‐CH4 gas mixture , 1994 .

[14]  P. Leprince,et al.  Distribution radiale de la densité électronique et de la densité des atomes excités dans une colonne de plasma produite par une onde de surface , 1980 .

[15]  C. Selomulya,et al.  Phase reduction of coated maghemite (γ-Fe2O3) nanoparticles under microwave-induced plasma heating for rapid heat treatment , 2012 .

[16]  Boleslav Gross,et al.  Plasma technology , 1968 .