The design of a transmitter with a parabolic conical reflector for a sonar ring

Sonar rings are composed of many ultrasonic receivers arranged in a ring and have in the past used many transmitters. The transmitters have been fired either serially or together and the receivers measure time-of-flight to reflectors in the environment. Serial transmission reduces the measurement rate around the entire ring, whilst parallel transmission incurs interference problems between neighbouring transmitters. This paper describes a new design employing a single high powered transmitter available from Murata (ESTD01 Super Tweeter) and a parabolic conical reflector that overcomes both these issues. The reflector is designed to narrow the vertical beamwidth of the transmitter and to provide good dispersion of the sound around the ring. The paper details the design, TLM simulation and measurements that characterise the performance, such as the intensity compared to previous systems, the elevation beamwidth and the pulse shape.

[1]  A. Ohya,et al.  A fast and accurate sonar-ring sensor for a mobile robot , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[2]  William J. O'Connor,et al.  Transmission line matrix acoustic modelling on a PC , 1997 .

[3]  Lindsay Kleeman,et al.  Sensor design and signal processing for an advanced sonar ring , 2006, Robotica.

[4]  Lindsay Kleeman.  Advanced Sonar with Velocity Compensation , 2004, Int. J. Robotics Res..

[5]  Peter B. Johns,et al.  Numerical solution of 2-dimensional scattering problems using a transmission-line matrix , 1971 .

[6]  Yoram Koren,et al.  Noise rejection for ultrasonic sensors in mobile robot applications , 1992, Proceedings 1992 IEEE International Conference on Robotics and Automation.

[7]  Y. Kagawa,et al.  Discrete Huygens' model approach to sound wave propagation , 1998 .