Comparison of four commercial devices for RapidArc and sliding window IMRT QA

For intensity‐modulated radiation therapy, evaluation of the measured dose against the treatment planning calculated dose is essential in the context of patient‐specific quality assurance. The complexity of volumetric arc radiotherapy delivery attributed to its dynamic and synchronization nature require new methods and potentially new tools for the quality assurance of such techniques. In the present study, we evaluated and compared the dosimetric performance of EDR2 film and three other commercially available quality assurance devices: IBA I'MatriXX array, PTW Seven29 array and the Delta 4 array. The evaluation of these dosimetric systems was performed for RapidArc and IMRT deliveries using a Varian NovalisTX linear accelerator. The plans were generated using the Varian Eclipse treatment planning system. Our results showed that all four QA techniques yield equivalent results. All patient QAs passed our institutional clinical criteria of gamma index based on a 3% dose difference and 3 mm distance to agreement. In addition, the Bland‐Altman analysis was performed which showed that all the calculated gamma values of all three QA devices were within 5% from those of the film. The results showed that the four QA systems used in this patient‐specific IMRT QA analysis are equivalent. We concluded that the dosimetric systems under investigation can be used interchangeably for routine patient specific QA. PACS numbers: 87.55.Qr, 87.56.Fc

[1]  D. Altman,et al.  STATISTICAL METHODS FOR ASSESSING AGREEMENT BETWEEN TWO METHODS OF CLINICAL MEASUREMENT , 1986, The Lancet.

[2]  Inhwan Jason Yeo,et al.  Film dosimetry for intensity modulated radiation therapy: dosimetric evaluation. , 2002, Medical physics.

[3]  D. Albers,et al.  Dosimetric evaluation of a 2D pixel ionization chamber for implementation in clinical routine , 2007, Physics in medicine and biology.

[4]  R Mohan,et al.  Conformal radiation treatment of prostate cancer using inversely-planned intensity-modulated photon beams produced with dynamic multileaf collimation. , 1996, International journal of radiation oncology, biology, physics.

[5]  The value of radiographic film for the characterization of intensity-modulated beams. , 2002, Physics in medicine and biology.

[6]  D. Low,et al.  A technique for the quantitative evaluation of dose distributions. , 1998, Medical physics.

[7]  P. Xia,et al.  Multileaf collimator leaf sequencing algorithm for intensity modulated beams with multiple static segments. , 1998, Medical physics.

[8]  Cedric X. Yu,et al.  Intensity-modulated arc therapy with dynamic multileaf collimation: an alternative to tomotherapy. , 1995, Physics in medicine and biology.

[9]  Karl Otto,et al.  Volumetric modulated arc therapy: IMRT in a single gantry arc. , 2007, Medical physics.

[10]  A. Beckett,et al.  AKUFO AND IBARAPA. , 1965, Lancet.

[11]  Dietrich Harder,et al.  Spatial resolution of 2D ionization chamber arrays for IMRT dose verification: single-detector size and sampling step width , 2007, Physics in medicine and biology.

[12]  Cedric X. Yu,et al.  Guidance document on delivery, treatment planning, and clinical implementation of IMRT: report of the IMRT Subcommittee of the AAPM Radiation Therapy Committee. , 2003, Medical physics.

[13]  F Banci Buonamici,et al.  An intercomparison between film dosimetry and diode matrix for IMRT quality assurance. , 2007, Medical physics.

[14]  D. Huyskens,et al.  On-line quality assurance of rotational radiotherapy treatment delivery by means of a 2D ion chamber array and the Octavius phantom. , 2007, Medical physics.

[15]  Piotr Zygmanski,et al.  Angular dose dependency of MatriXX TM and its calibration , 2010, Journal of applied clinical medical physics.

[16]  A G Haus,et al.  Evaluation of a cassette-screen-film combination for radiation therapy portal localization imaging with improved contrast. , 1997, Medical physics.

[17]  David A Jaffray,et al.  Novel dosimetric phantom for quality assurance of volumetric modulated arc therapy. , 2009, Medical physics.

[18]  Gorgen Nilsson,et al.  Characterization and clinical evaluation of a novel IMRT quality assurance system , 2009, Journal of applied clinical medical physics.

[19]  Wolfgang A. Tomé,et al.  Quality assurance device for four‐dimensional IMRT or SBRT and respiratory gating using patient‐specific intrafraction motion kernels , 2007, Journal of applied clinical medical physics.

[20]  Stefania Pallotta,et al.  Design and implementation of a water phantom for IMRT, arc therapy, and tomotherapy dose distribution measurements. , 2007, Medical physics.

[21]  James L Bedford,et al.  Evaluation of the Delta4 phantom for IMRT and VMAT verification , 2009, Physics in medicine and biology.

[22]  Y. D. Deene,et al.  Validation and application of polymer gel dosimetry for the dose verification of an intensity-modulated arc therapy (IMAT) treatment. , 2004, Physics in medicine and biology.

[23]  Vladimir Feygelman,et al.  Evaluation of a biplanar diode array dosimeter for quality assurance of step‐and‐shoot IMRT , 2009, Journal of applied clinical medical physics.

[24]  A. L. Angelini,et al.  Characterization of a 2D ion chamber array for the verification of radiotherapy treatments , 2005, Physics in medicine and biology.

[25]  C. Ling,et al.  Commissioning and quality assurance of RapidArc radiotherapy delivery system. , 2008, International journal of radiation oncology, biology, physics.