AC coupling technique for Josephson waveform synthesis

We demonstrate a new bias technique that uses low-pass and high-pass filters to separate the current paths of the sampling and signal frequencies in a Josephson waveform synthesizer. This technique enables the output voltage of the array to be directly grounded by removing the low-frequency common mode signal that previously prevented direct measurement of the array voltage with low-impedance instruments. We directly measure the harmonic spectra of 1 kHz and 50 kHz synthesized sine waves. We also use a thermal transfer standard to compare the rms voltages of synthesized sine waves at frequencies from 1 kHz to 50 kHz. Finally, we describe a new circuit that should enable a significant increase in output voltage by allowing several distributed arrays to be biased in parallel at high frequency, while combining their low frequency output voltages in series.