Review of the use of air-coupled ultrasonic technologies for nondestructive testing of wood and wood products

Wood property measurement and defect detection have been summarized.ACU parameters are highly influenced by wood properties and defects.Signal and image processing methods improve the quality of ACU signals or C-scan images.Computer simulation and statistical methods aid to compensate for the background variation.Imaging speed is an obstacle to industrial application. Air-coupled ultrasonic (ACU) is a contactless ultrasonic measurement method which has become increasingly popular for material characterization. This is due to a growing number of advanced materials which cannot be contaminated during the testing processes by coupling agents utilized in conventional ultrasonic testing. This paper provides a review of the applications of ACU to wood and wood products. The ACU fundamentals, including principles, working modes and commercial transducers used for this purpose, is briefly described. The emphasis of this paper is on approaches of inspection and characterization. The applications of ACU to wood characterization with reference to wood quality aspects are summarized. Correlations between the ACU parameters (i. e. amplitude, velocity, and spectrum) and the wood properties (i.e. density, moisture content, strength, and stiffness) as well as the wood defects (i. e. knots, cracks, decay, insect damage, and delamination) are dealt with in detail. Finally, a discussion of apparent future research directions completes this review.

[1]  Peter Niemz,et al.  Air-coupled ultrasound as an accurate and reproducible method for bonding assessment of glued timber , 2011, Wood Science and Technology.

[2]  Junji Matsumura,et al.  Non-Contact Velocity Measurement of Japanese Cedar Columns Using Air-Coupled Ultrasonics , 2016 .

[3]  Zhixiong Lu,et al.  APPLICATION OF AIR-COUPLED ULTRASONIC IMAGING TECHNIQUE FOR NONDESTRUCTIVE TESTING OF SOLID WOOD BOARD , 2015 .

[4]  Renaldas Raisutis,et al.  Investigation of the quality of the surface of wood lamellas using air – coupled ultrasonic technique , 2016 .

[5]  Tomas E. Gomez Alvarez-Arenas,et al.  Air-coupled ultrasonic resonant spectroscopy for the study of the relationship between plant leaves' elasticity and their water content , 2012, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control.

[6]  Raimond Grimberg,et al.  ULTRASOUND AND VISUAL EXAMINATION OF WOOD BASED PRODUCTS , 2005 .

[7]  Erik Blomme,et al.  High speed air-coupled ultrasonic multichannel system , 2014 .

[8]  David K. Hsu,et al.  Non‐Contact Inspection of Composites Using Air‐Coupled Ultrasound , 2003 .

[9]  Bernard Hosten,et al.  Elastic constants measurement of anisotropic Olivier wood plates using air-coupled transducers generated Lamb wave and ultrasonic bulk wave. , 2010, Ultrasonics.

[10]  D A Hutchins,et al.  Air-coupled ultrasonic evaluation of food materials. , 2009, Ultrasonics.

[11]  Koichiro Kawashima,et al.  Development of Non-contact Air Coupled Ultrasonic Testing system for reinforced concrete structure , 2013, 2013 Far East Forum on Nondestructive Evaluation/Testing: New Technology and Application.

[12]  Reijo Lappalainen,et al.  Ultrasound evaluation of lathe check depth in birch veneer , 2009, European Journal of Wood and Wood Products.

[13]  Junji Matsumura,et al.  Nondestructive evaluation of bending strength of wood with artificial holes by employing air-coupled ultrasonics , 2016 .

[14]  Rainer Stößel,et al.  Air-coupled ultrasound inspection as a new non-destructive testing tool for quality assurance , 2004 .

[15]  Hailin Feng,et al.  Accelerated Air-coupled Ultrasound Imaging of Wood Using Compressed Sensing , 2015 .

[16]  Robert J. Ross,et al.  Ultrasonic-Based Nondestructive Evaluation Methods for Wood A Primer and Historical Review , 2014 .

[17]  R. Gr. Maev,et al.  Air-Coupled Imaging Method Applied to the Study and Conservation of Paintings , 2007 .

[18]  Peter Cawley,et al.  Single Sided Inspection of Composite Materials Using Air Coupled Ultrasound , 1998 .

[19]  Lars Hoff,et al.  Air-coupled ultrasonic through-transmission thickness measurements of steel plates. , 2015, Ultrasonics.

[20]  Reijo Lappalainen,et al.  Non-destructive evaluation of checking in thermally modified timber , 2013, Wood Science and Technology.

[21]  D. Schindel,et al.  The design and characterization of micromachined air-coupled capacitance transducers , 1995, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[22]  Roman Furrer,et al.  Air-coupled ultrasound inspection of glued laminated timber , 2011 .

[23]  Ikuo Ihara,et al.  Application of Air-Coupled Ultrasound to Noncontact Evaluation of Paper Surface Roughness , 2014 .

[24]  Mandy Berg,et al.  Nondestructive Characterization and Imaging of Wood , 2003, Holz als Roh- und Werkstoff.

[25]  Tat-Hean Gan,et al.  Air-coupled ultrasonic evaluation of food materials , 2007 .

[26]  Reijo Lappalainen,et al.  Air-coupled ultrasound and electrical impedance analyses of normally dried and thermally modified Scots pine (Pinus sylvestris) , 2016 .

[27]  Erik Blomme,et al.  Air-coupled ultrasonic assessment of wood veneer. , 2010, Ultrasonics.

[28]  R Lappalainen,et al.  Moisture content determination of thermally modified timber by electrical and ultrasound methods , 2011 .

[29]  G. M. Revel,et al.  NON-CONTACT ULTRASONIC SENSOR FOR DENSITY MEASUREMENT AND DEFECT DETECTION ON WOOD , 2004 .

[30]  Manuel Dierick,et al.  Impact of internal structure on water-resistance of plywood studied using neutron radiography and X-ray tomography , 2014 .

[31]  Carlos Fritsch,et al.  Passive focusing techniques for piezoelectric air-coupled ultrasonic transducers. , 2016, Ultrasonics.

[32]  Qinglin Wu,et al.  ULTRASONIC CHARACTERIZATION OF STRUCTURAL PROPERTIES OF ORIENTED STRANDBOARD: A COMPARISON OF DIRECT-CONTACT AND NON-CONTACT METHODS 1 , 2003 .

[33]  Wolfgang Hillger,et al.  Air-coupled Ultrasonic Testing-Method, System and practical Applications , 2014 .

[34]  Mahesh C. Bhardwaj,et al.  Development of Non-contact Ultrasound as a Sensor for Wood Moisture Content , 2006 .

[35]  David K. Hsu,et al.  NDE OF LUMBER AND NATURAL FIBER BASED PRODUCTS WITH AIR COUPLED ULTRASOUND , 2010 .

[36]  Pietro Burrascano,et al.  Coded waveforms for optimised air-coupled ultrasonic nondestructive evaluation. , 2014, Ultrasonics.

[37]  D. E. Chimenti,et al.  Design, Fabrication and Characterization of a Spherically Focused Capacitive Air-Coupled Ultrasonic Transducer , 2006 .

[38]  H. Berndt,et al.  High-resolution ultrasonic imaging of wood , 1999, Wood Science and Technology.

[39]  Gamaliel López,et al.  Estimation of wood density using infrared thermography , 2013 .

[40]  Monlin Kuo,et al.  Detecting Sinker-Stock Lumber with Ultrasound Measurements , 2006 .

[41]  D. Schindel,et al.  The use of broadband acoustic transducers and pulse-compression techniques for air-coupled ultrasonic imaging. , 2001, Ultrasonics.

[42]  Urs Sennhauser,et al.  Modeling and prediction of density distribution and microstructure in particleboards from acoustic properties by correlation of non-contact high-resolution pulsed air-coupled ultrasound and X-ray images. , 2013, Ultrasonics.

[43]  A. M. Siddiolo.  A 2D-FFT signal processing technique to enhance the contrast of air-coupled ultrasonic C-scans , 2006 .

[44]  D.A. Hutchins,et al.  The application of time-frequency analysis to the air-coupled ultrasonic testing of concrete , 2006, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[45]  M. K. Andrews,et al.  Noncontact, high-resolution ultrasonic imaging of wood samples using coded chirp waveforms , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[46]  Robert E. Green,et al.  AIR-COUPLED ULTRASONIC SYSTEM: A NEW TECHNOLOGY FOR DETECTING FLAWS IN PAINTINGS ON WOODEN PANELS , 1996 .

[47]  D E Chimenti,et al.  Review of air-coupled ultrasonic materials characterization. , 2014, Ultrasonics.

[48]  Deborah L. Miller,et al.  Noncontact ultrasound detection of exotic insects in wood packing materials , 2005 .

[49]  Erik Blomme,et al.  Air-coupled ultrasonic NDE: experiments in the frequency range 750 kHz–2 MHz , 2002 .

[50]  John J. Janowiak,et al.  Calibration of non-contact ultrasound as an online sensor for wood characterization: Effects of temperature, moisture, and scanning direction , 2007 .

[51]  K. Pfleiderer,et al.  Nondestructive characterization of wood by monitoring of local elastic anisotropy and dynamic nonlinearity , 2004 .

[52]  Roman Furrer,et al.  Novel slanted incidence air-coupled ultrasound method for delamination assessment in individual bonding planes of structural multi-layered glued timber laminates. , 2013, Ultrasonics.

[53]  Ulrich Hilbers,et al.  Effects of panel density and particle type on the ultrasonic transmission through wood-based panels , 2012, Wood Science and Technology.

[54]  C. M. Fortunko,et al.  Air-coupled Ultrasonic System for Nondestructive Evaluation of Wooden Panel Paintings , 1992 .

[55]  A.M. Siddiolo,et al.  Wooden panel paintings investigation: An air-coupled ultrasonic imaging approach , 2007, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[56]  Rubén Picó,et al.  Application of Ultrasound Phase-Shift Analysis to Authenticate Wooden Panel Paintings , 2014, Sensors.

[57]  Anish Poudel,et al.  Air-coupled Ultrasonic Testing of Carbon-carbon Composite Aircraft Brake Disks , 2013 .

[58]  Roman Furrer,et al.  Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing. , 2015, Ultrasonics.

[59]  Mauri Luukkala,et al.  Paper roughness measurement using airborne ultrasound , 1995 .

[60]  Peter Niemz,et al.  Observation of interference effects in air-coupled ultrasonic inspection of wood-based panels , 2011, Wood Science and Technology.