On the effect of the measurement error on Shewhart t and EWMA t control charts

[1]  James Morrison,et al.  The Lognormal Distribution in Quality Control , 1958 .

[2]  Arthur B. Yeh,et al.  Control Charts for the Lognormal Mean , 2016, Qual. Reliab. Eng. Int..

[3]  Marcel F. Neuts,et al.  Matrix-geometric solutions in stochastic models - an algorithmic approach , 1982 .

[4]  Cédric Heuchenne,et al.  On the performance of CUSUM control charts for monitoring the coefficient of variation with measurement errors , 2019, The International Journal of Advanced Manufacturing Technology.

[5]  Phuong Hanh Tran,et al.  A Synthetic median control chart for monitoring the process mean with measurement errors , 2019, Qual. Reliab. Eng. Int..

[6]  Paul S. Ray,et al.  Control Charts for Monitoring Field Failure Data , 2006, Qual. Reliab. Eng. Int..

[7]  William H. Woodall,et al.  Effect of Measurement Error on Shewhart Control Charts , 2001 .

[8]  Vaidyanathan Ramaswami,et al.  Introduction to Matrix Analytic Methods in Stochastic Modeling , 1999, ASA-SIAM Series on Statistics and Applied Mathematics.

[9]  Rassoul Noorossana,et al.  Effect of measurement error on phase II monitoring of simple linear profiles , 2015 .

[10]  George Nenes,et al.  Optimization of a fully adaptive quality and maintenance model in the presence of multiple location and scale quality shifts , 2018 .

[11]  Kim Phuc Tran,et al.  On the performance of VSI Shewhart control chart for monitoring the coefficient of variation in the presence of measurement errors , 2019, The International Journal of Advanced Manufacturing Technology.

[12]  Philippe Castagliola,et al.  The EWMA median chart with estimated parameters , 2016 .

[13]  N. L. Johnson,et al.  Systems of frequency curves generated by methods of translation. , 1949, Biometrika.

[14]  Giovanni Celano,et al.  Monitoring the ratio of population means of a bivariate normal distribution using CUSUM type control charts , 2016, Statistical Papers.

[15]  Philippe Castagliola,et al.  Measurement errors in statistical process monitoring: A literature review , 2017, Comput. Ind. Eng..

[16]  Michael B. C. Khoo,et al.  The run sum t control chart for monitoring process mean changes in manufacturing , 2014 .

[17]  Philippe Castagliola,et al.  On t and EWMA t charts for monitoring changes in the process mean , 2009, Qual. Reliab. Eng. Int..

[18]  Giovanni Celano,et al.  The Economic Performance of a CUSUM t Control Chart for Monitoring Short Production Runs , 2012 .

[19]  Giovanni Celano,et al.  The economic performance of the Shewhart t chart , 2012, Qual. Reliab. Eng. Int..

[20]  Kim Phuc Tran,et al.  Designing of Run Rules t control charts for monitoring changes in the process mean , 2018 .

[21]  Stelios Psarakis,et al.  EWMA Chart and Measurement Error , 2004 .

[22]  D. A. Evans,et al.  An approach to the probability distribution of cusum run length , 1972 .

[23]  Kim Phuc Tran,et al.  One-Sided Synthetic Control Charts for Monitoring the Coefficient of Variation with Measurement Errors , 2018, 2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM).

[24]  Giovanni Celano,et al.  Comparison of the Xō Chart and the t Chart When the Parameters are Estimated , 2013 .

[25]  H. S. Sichel,et al.  A Chart for Sequentially Testing Observed Arithmetic Means from Lognormal Populations Against a Given Standard , 1968 .

[26]  Anis Chelbi,et al.  Integrated production, statistical process control, and maintenance policy for unreliable manufacturing systems , 2018, Int. J. Prod. Res..

[27]  D. Cox,et al.  An Analysis of Transformations , 1964 .

[28]  Douglas C. Montgomery,et al.  Statistical quality control : a modern introduction , 2009 .

[29]  Narayanaswamy Balakrishnan,et al.  On the performance of coefficient of variation charts in the presence of measurement errors , 2018, Qual. Reliab. Eng. Int..

[30]  S.S. Clheng.  Optimal Replacement Rate of Devices with Lognormal Failure Distributions , 1977, IEEE Transactions on Reliability.

[31]  Xiao Han,et al.  Reliability-oriented design of integrated model of preventive maintenance and quality control policy with time-between-events control chart , 2019, Comput. Ind. Eng..

[32]  Giovanni Celano,et al.  Shewhart and EWMA t control charts for short production runs , 2011, Qual. Reliab. Eng. Int..

[33]  Petros E. Maravelakis,et al.  Measurement error effect on the CUSUM control chart , 2012 .