Preparation and properties of bulk ZnO/MoS2 nanocomposite by cold sintering process with three-component solvent

[1]  Linhui Fu,et al.  A polydiacetylene-based smart cellulose aerogel functionalized by ZnO/MoS2 heterojunction for simultaneous visual detection and photocatalytic degradation of gaseous VOCs , 2023, Separation and Purification Technology.

[2]  E. N. Muhamad,et al.  Synthesis, physicochemical characterization of ZnO and α-MoO3/ZnO heterostructures and their photocatalytic activity for the methylene blue (MB) dye degradation , 2023, Optical Materials.

[3]  Jing Chen,et al.  Cold sintering process assisted sintering for 8YSZ ceramic: A way of achieving high density and electrical conductivity at a reduced sintering temperature , 2023, Ceramics International.

[4]  E. Gomaa,et al.  Promising MoS2 - ZnO Hybrid nanocomposite photocatalyst for antibiotics, and dyes remediation in wastewater applications , 2022, Environmental Nanotechnology, Monitoring & Management.

[5]  C. Randall,et al.  The effect of liquid phase chemistry on the densification and strength of cold sintered ZnO , 2022, Journal of the European Ceramic Society.

[6]  D. Sang,et al.  Research progress of optoelectronic devices based on two-dimensional MoS_2 materials , 2022, Rare Metals.

[7]  Ping Shen,et al.  Densification of oxides via cold sintering of hydrate precursors , 2022, Journal of the European Ceramic Society.

[8]  M. Abdouss,et al.  A comprehensive review of synthesis, structure, properties, and functionalization of MoS2; emphasis on drug delivery, photothermal therapy, and tissue engineering applications , 2022, Journal of Drug Delivery Science and Technology.

[9]  Hao Wang,et al.  Fine-grained ZnO ceramic fabricated by high-pressure cold sintering , 2022, Ceramics International.

[10]  Mupeng Zheng,et al.  Cold sintering co‐firing of (Ca , Bi)(Mo , V)O 4 –PTFE composites in a single step , 2022, Journal of the American Ceramic Society.

[11]  P. Taberna,et al.  Cold Sintering Process characterization by in operando Electrochemical Impedance Spectroscopy , 2022, Journal of the European Ceramic Society.

[12]  A. V. van Duin,et al.  Morphological and chemical evolution of transient interfaces during zinc oxide cold sintering process , 2022, Materials Today Chemistry.

[13]  Yang Wu,et al.  Mussel-Inspired Interfacial Modification for Ultra-Stable MoS2 Lubricating Films with Improved Tribological Behavior on Nano-Textured ZnO Surfaces Using the AACVD Method. , 2022, ACS applied materials & interfaces.

[14]  Mu Ren,et al.  Influence and Mechanism of Polar Solvents on the Retention Time of Short-Chain Fatty Acids in Gas Chromatography , 2022, Separations.

[15]  Weijia Yang,et al.  ZnO@MoS2 Core–Shell Heterostructures Enabling Improved Photocatalytic Performance , 2022, Applied Sciences.

[16]  D. Panda,et al.  Review—Next Generation 2D Material Molybdenum Disulfide (MoS2): Properties, Applications and Challenges , 2022, ECS Journal of Solid State Science and Technology.

[17]  S. S. Khan,et al.  Recent development in MoS2-based nano-photocatalyst for the degradation of pharmaceutical active compounds , 2022, Journal of Cleaner Production.

[18]  C. Randall,et al.  Integration and Characterization of a Ferroelectric Polymer PVDF-TrFE into the Grain Boundary Structure of ZnO via Cold Sintering , 2022, Journal of the European Ceramic Society.

[19]  Hong Wang,et al.  Altering interfacial properties through the integration of C60 into ZnO ceramic via cold sintering process , 2022, Carbon.

[20]  B. Yadav,et al.  Development of 2D based ZnO–MoS2 nanocomposite for photodetector with light-induced current study , 2022, Optical Materials.

[21]  Yuanfeng Li,et al.  Porous TiO2/rGO nanocomposites prepared by cold sintering as efficient electrocatalyst for nitrogen reduction reaction under ambient conditions , 2021, Journal of the European Ceramic Society.

[22]  Rajesh Kumar,et al.  Probing on crystallographic structural and surface morphology of hydrothermally synthesized MoS2 nanoflowers consisting of nanosheets , 2021, Applied Surface Science Advances.

[23]  R. Srivastava,et al.  A Facile Liquid‐Phase, Solvent‐Dependent Exfoliation of Large Scale MoS 2 Nanosheets and Study of Their Photoconductive Behaviour for UV‐Photodetector Application , 2021, ChemistrySelect.

[24]  L. Kollo,et al.  Progress in additive manufacturing of MoS2-based structures for energy storage applications – A review , 2021, Materials Science in Semiconductor Processing.

[25]  Yuchi Fan,et al.  Highly Improved Microwave Absorbing and Mechanical Properties in Cold Sintered ZnO by Incorporating Graphene Oxide , 2021, Journal of the European Ceramic Society.

[26]  V. Sglavo,et al.  The cold sintering process: A review on processing features, densification mechanisms and perspectives , 2021, Journal of the European Ceramic Society.

[27]  J. Kramar,et al.  Dynamic light scattering distributions by any means , 2021, Journal of Nanoparticle Research.

[28]  S. Gierlotka,et al.  Molybdenum disulfide-based hybrid materials as new types of oil additives with enhanced tribological and rheological properties , 2021 .

[29]  V. Stolyarov,et al.  Comparative Study of Cold Sintering Process and Autoclave Thermo-Vapor Treatment on a ZnO Sample , 2021, Crystals.

[30]  M. A. García,et al.  Cold sintering process of ZnO ceramics: Effect of the nanoparticle/microparticle ratio , 2020, Journal of the European Ceramic Society.

[31]  O. Guillon,et al.  Influence of powder characteristics on cold sintering of nano-sized ZnO with density above 99 % , 2020 .

[32]  R. Kumar,et al.  A comprehensive review on synthesis and applications of molybdenum disulfide (MoS2) material: Past and recent developments , 2020, Inorganic Chemistry Communications.

[33]  Sunil Kumar,et al.  Shock wave induced exfoliation of molybdenum disulfide (MoS2) in various solvents: All-atom molecular dynamics simulation , 2020 .

[34]  A. Bianco,et al.  Comparative Effects of Graphene and Molybdenum Disulfide on Human Macrophage Toxicity. , 2020, Small.

[35]  C. Randall,et al.  Roadmap for densification in cold sintering: Chemical pathways , 2020 .

[36]  C. Randall,et al.  A Route towards Fabrication of Functional Ceramic/Polymer Nanocomposite Devices Using the Cold Sintering Process , 2020, ACS Applied Electronic Materials.

[37]  C. Randall,et al.  Thermosetting polymers in cold sintering: The fabrication of ZnO‐polydimethylsiloxane composites , 2020 .

[38]  Saeed Zeinali Heris,et al.  Experimental comparison between ZnO and MoS2 nanoparticles as additives on performance of diesel oil-based nano lubricant , 2020, Scientific Reports.

[39]  A. V. van Duin,et al.  Comparing hydrothermal sintering and cold sintering process: Mechanisms, microstructure, kinetics and chemistry , 2020, Journal of the European Ceramic Society.

[40]  E. Olevsky,et al.  A theoretical analysis of cold sintering , 2019, Advances in Applied Ceramics.

[41]  Xifang Chen,et al.  Fabrication of ZnO@MoS2 Nanocomposite Heterojunction Arrays and Their Photoelectric Properties , 2020, Micromachines.

[42]  Sougata Ghosh,et al.  Enhanced Sunlight-Driven Photocatalytic and Antibacterial Activities of Flower-Like ZnO@MoS2 Nanocomposite , 2020, Journal of Nanoparticle Research.

[43]  S. Pennycook,et al.  Introducing Normalized Centrifugation for a More Accurate Thermodynamic Analysis of Molybdenum Disulfide Dispersions: A Study on Mixed Solvents of Alcohols and Amines with Water. , 2019, ACS applied materials & interfaces.

[44]  Bing Wang,et al.  UV-Visible Photodetector Based on I-type Heterostructure of ZnO-QDs/Monolayer MoS2 , 2019, Nanoscale Research Letters.

[45]  Hua-rui Xu,et al.  Preparation of high density ZnO ceramics by the Cold Sintering Process , 2019, Ceramics International.

[46]  J. Maria,et al.  Cold Sintering: Progress, Challenges, and Future Opportunities , 2019, Annual Review of Materials Research.

[47]  R. Perzynski,et al.  Inversion of thermodiffusive properties of ionic colloidal dispersions in water-DMSO mixtures probed by forced Rayleigh scattering , 2019, The European physical journal. E, Soft matter.

[48]  J. Maria,et al.  Cold sintering with dimethyl sulfoxide solutions for metal oxides , 2019, Journal of Materials Science.

[49]  H. Nalwa,et al.  Flexible Molybdenum Disulfide (MoS2) Atomic Layers for Wearable Electronics and Optoelectronics. , 2019, ACS applied materials & interfaces.

[50]  Changgu Lee,et al.  Comparison of Frictional Properties of CVD-Grown MoS2 and Graphene Films under Dry Sliding Conditions , 2019, Nanomaterials.

[51]  J. Maria,et al.  Mechanical strength of cold-sintered zinc oxide under biaxial bending , 2018, Journal of Materials Science.

[52]  Jing Guo,et al.  Recent Progress in Applications of the Cold Sintering Process for Ceramic–Polymer Composites , 2018, Advanced Functional Materials.

[53]  C. Randall,et al.  Introducing a ZnO–PTFE (Polymer) Nanocomposite Varistor via the Cold Sintering Process , 2018 .

[54]  Y. Gogotsi,et al.  Cold Sintered Ceramic Nanocomposites of 2D MXene and Zinc Oxide , 2018, Advanced materials.

[55]  B. D. Gupta,et al.  Urinary p-cresol diagnosis using nanocomposite of ZnO/MoS2 and molecular imprinted polymer on optical fiber based lossy mode resonance sensor. , 2018, Biosensors & bioelectronics.

[56]  Guillermo González,et al.  Heterostructured layered hybrid ZnO/MoS2 nanosheets with enhanced visible light photocatalytic activity , 2018 .

[57]  O. Guillon,et al.  Unveiling the mechanisms of cold sintering of ZnO at 250 °C by varying applied stress and characterizing grain boundaries by Kelvin Probe Force Microscopy , 2018 .

[58]  J. Nuzillard,et al.  Small Molecule Mixture Analysis by Heteronuclear NMR under Spin Diffusion Conditions in Viscous DMSO-Water Solvent. , 2017, Chemistry.

[59]  S. Mohajerzadeh,et al.  Sequential Solvent Exchange Method for Controlled Exfoliation of MoS2 Suitable for Phototransistor Fabrication. , 2016, ACS applied materials & interfaces.

[60]  Wonbong Choi,et al.  Growth of large-scale and thickness-modulated MoS₂ nanosheets. , 2014, ACS applied materials & interfaces.

[61]  M. Fakhree,et al.  Density, viscosity, and surface tension of water+ethanol mixtures from 293 to 323K , 2012, Korean Journal of Chemical Engineering.

[62]  C. M. Marschoff,et al.  On the density and viscosity of (water + dimethylsulphoxide) binary mixtures , 2007 .

[63]  M. A. Saleh,et al.  Excess molar volume, viscosity and thermodynamics of viscous flow of the system dimethylsulfoxide and acetic acid , 2004 .

[64]  Li-Yuan Wang,et al.  Interface engineering of modified ZnO@MoS2 heterostructure to efficiently enhance charge transfers and carrier regulation , 2023, Journal of Luminescence.

[65]  Niranjana Behera,et al.  Study of wear and friction characteristics of powder lubricants under extreme pressure conditions , 2020 .

[66]  Yongping Dong,et al.  Electrogenerated Chemiluminescence of ZnO/MoS2 Nanocomposite and Its Application for Cysteine Detection , 2019, Journal of The Electrochemical Society.

[67]  C. D. Izarra,et al.  Study of tribological properties of nanolamellar WS 2 and MoS 2 as additives to lubricants , 2014 .

[68]  A. A. Yadav,et al.  Visible light activated MoS2/ZnO composites for photocatalytic degradation of ciprofloxacin antibiotic and hydrogen production , 2022, Journal of Photochemistry and Photobiology A: Chemistry.