Design and fabrication of an electrothermal microactuator for multi-level conveying

During the past years, a variety of microactuators developed for micro-conveyors have been presented. However, such micro-conveyors can only provide conveying motion in a single plane. Here an electrothermally driven microactuator with a capability of adjustable height is proposed, which may act as a basic unit for multi-level conveyors. This microactuator is based on the principle of thermal bimorph actuation with two long conveying fingers to exert out-of-plane bending motions in the transversal direction, which are connected and lifted by an initially curved height adjuster in the longitudinal direction. The devices can provide conveyance of micro-objects between two plane levels of different heights. The testing results show that the two fingers and a height adjuster can be actuated simultaneously and individually with little thermal crosstalk. The proposed device with a dimension of 900×100×4.5 μm3 can provide 5 μm vertical displacements by the height adjuster at 1 V and 18 μm lateral displacements by the conveying finger at 2 V. Simulations by finite-element program ANSYS 5.7 have been performed and widely match with testing results.

[1]  Haruo Nakazawa,et al.  The two-dimensional micro conveyer: principles and fabrication process of the actuator , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[2]  Hiroyuki Fujita,et al.  Two dimensional micro conveyance system with through holes for electrical and fluidic interconnection , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[3]  Hiroyuki Fujita,et al.  A conveyance system using air flow based on the concept of distributed micro motion systems , 1994 .

[4]  H. Fujita,et al.  Array-driven ultrasonic microactuators , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.

[5]  Chih-Ming Ho,et al.  A Micromachined Permalloy Magnetic Actuator Array for Micro Robotics Assembly Systems , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[6]  K. Pister,et al.  A planar air levitated electrostatic actuator system , 1990, IEEE Proceedings on Micro Electro Mechanical Systems, An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots..

[7]  H. Nakazawa,et al.  Two-dimensional micro conveyer with integrated electrostatic actuators , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[8]  Hiroyuki Fujita,et al.  Fabrication and operation of polyimide bimorph actuators for a ciliary motion system , 1993 .

[9]  Ronald S. Fearing,et al.  Powering 3 Dimensional Microrobots: Power Density Limitations , 1998 .