Material strategies for black-to-transmissive window-type polymer electrochromic devices.

Black-to-transmissive switching polymer electrochromic devices (ECDs) were designed using a set of spray-processable cathodically coloring polymers, a non-color-changing electroactive polymer poly(2,2,6,6-tetramethylpiperidinyloxy-4-yl methacrylate) (PTMA) as the charge-compensating counter electrode, and a highly conducting gel electrolyte (6.5 mS cm(-1)). The color "black" was obtained by utilizing (1) individual copolymers absorbing across the visible spectrum, and (2) blends and bilayers of several polymer electrochromes with complementary spectral absorption. Neutral-state black and ink-like dark purple-blue (or "ink-black") donor-acceptor (DA) copolymers composed of the electron-donor 3,4-propylenedioxythiophene (ProDOT) and the electron-acceptor 2,1,3-benzothiadiazole (BTD) building units, which possess relatively homogeneous absorption profiles across the visible spectrum, were chosen for their propensity to switch to transmissive states upon electrochemical oxidation. A blend of magenta and cyan polymers (PProDOT-(CH(2)OEtHx)(2) and P(ProDOT-BTD-ProDOT), respectively) was produced with the goal of generating the same dark purple-blue color as that obtained with the "ink-black" DA copolymer. While the multi-polymer ECDs demonstrate high contrasts (up to 50%T), and switch from a saturated purple-blue color (L*=32, a*=13, b*=-46) to a light green-blue transmissive state (L*=83, a*=-3, b*=-6), devices made with the DA electrochromic copolymers switch more than two times faster (0.7 s to attain 95% of the full optical change) than those involving the polymer blends (1.6 s), and exhibit more neutral achromatic colors (L*=38, a*=5, b*=-25 for the colored state and L*=87, a*=-3, b*=-2 for the bleached state, correspondingly). The results obtained suggest that these materials should prove to be applicable in both transmissive- (window-type) and reflective-type ECDs.

[1]  Evan P. Donoghue,et al.  Color purity in polymer electrochromic window devices on indium-tin oxide and single-walled carbon nanotube electrodes. , 2009, ACS applied materials & interfaces.

[2]  Zhan'ao Tan,et al.  Synthesis and photovoltaic properties of two-dimensional conjugated polythiophenes with bi(thienylenevinylene) side chains. , 2006, Journal of the American Chemical Society.

[3]  U. Bach,et al.  Coloured electrochromic “paper-quality” displays based on modified mesoporous electrodes , 2003 .

[4]  Jaeyoung Lee,et al.  Electrochromic Mechanism of IrO2 Prepared by Pulsed Anodic Electrodeposition , 2004 .

[5]  Levent Toppare,et al.  A neutral state green polymer with a superior transmissive light blue oxidized state. , 2007, Chemical communications.

[6]  Mats Andersson,et al.  Laminated fabrication of polymeric photovoltaic diodes , 1998, Nature.

[7]  David R. Rosseinsky,et al.  Electrochromism and Electrochromic Devices , 2007 .

[8]  Bernard Kippelen,et al.  A high-mobility electron-transport polymer with broad absorption and its use in field-effect transistors and all-polymer solar cells. , 2007, Journal of the American Chemical Society.

[9]  M. Ristova,et al.  Electrochromism of the electroless deposited cuprous oxide films , 2007 .

[10]  N. E. Coates,et al.  Efficient Tandem Polymer Solar Cells Fabricated by All-Solution Processing , 2007, Science.

[11]  N. Kobayashi,et al.  Bi-based electrochromic cell with mediator for white/black imaging , 2009 .

[12]  Fred Wudl,et al.  A red, green, and blue (RGB) polymeric electrochromic device (PECD): the dawning of the PECD era. , 2004, Angewandte Chemie.

[13]  J. Reynolds,et al.  Dual-polymer electrochromic film characterization using bipotentiostatic control , 2008 .

[14]  Benjamin D. Reeves,et al.  Spray Coatable Electrochromic Dioxythiophene Polymers with High Coloration Efficiencies , 2004 .

[15]  D. Bradley,et al.  Organic Photovoltaic Devices Based on Blends of Regioregular Poly(3-hexylthiophene) and Poly(9,9-dioctylfluorene-co-benzothiadiazole) , 2004 .

[16]  G. Sotzing,et al.  All-Organic Electrochromic Spandex , 2010 .

[17]  J. Reynolds,et al.  Influence of the film thickness and morphology on the colorimetric properties of spray-coated electrochromic disubstituted 3,4-propylenedioxythiophene polymers. , 2009, ACS applied materials & interfaces.

[18]  A. Rauh,et al.  Composite Coloration Efficiency Measurements of Electrochromic Polymers Based on 3,4-Alkylenedioxythiophenes , 2002 .

[19]  John R. Reynolds,et al.  Black to Transmissive Switching in a Pseudo Three-Electrode Electrochromic Device , 2009 .

[20]  F. Wudl,et al.  A Processable Green Polymeric Electrochromic , 2005 .

[21]  J. Reynolds,et al.  Spray‐Processable Blue‐to‐Highly Transmissive Switching Polymer Electrochromes via the Donor–Acceptor Approach , 2010, Advanced materials.

[22]  Anders Hagfeldt,et al.  Spectroelectrochemistry of Nanostructured NiO , 2001 .

[23]  Toribio F. Otero,et al.  Contrast limitations of dual electrochromic systems , 2008 .

[24]  R. Nakano,et al.  Electrochromism and Electronic Structures of Nitrogen Doped Tungsten Oxide Thin Films Prepared by RF Reactive Sputtering , 2008 .

[25]  David Y. Liu,et al.  Broadly Absorbing Black to Transmissive Switching Electrochromic Polymers , 2010, Advanced materials.

[26]  J. Reynolds,et al.  Color control in pi-conjugated organic polymers for use in electrochromic devices. , 2010, Chemical reviews.

[27]  Chao Ma,et al.  Smart Sunglasses Based on Electrochromic Polymers , 2008 .

[28]  J. Reynolds,et al.  The donor-acceptor approach allows a black-to-transmissive switching polymeric electrochrome. , 2008, Nature materials.

[29]  J. Reynolds,et al.  Unsaturated Linkages in Dioxythiophene−Benzothiadiazole Donor−Acceptor Electrochromic Polymers: The Key Role of Conformational Freedom , 2009 .

[30]  J. Pomposo,et al.  Synthesis and Spectroelectrochemical Characterization of an Electrochromic Phosphole-EDOT Copolymer: poly([1-phenyl-2,5-bis(2-thienyl)thioxophosphole]0.14 -co- [3,4-ethylendioxythiophene]0.86) , 2008 .

[31]  F. Krebs.  Electrochromic displays: The new black. , 2008, Nature materials.

[32]  J. Pomposo,et al.  Orange to black electrochromic behaviour in poly(2-(2-thienyl)-1H-pyrrole) thin films , 2007 .

[33]  P. Monk,et al.  Electrochromic paper : utility of electrochromes incorporated in paper , 2001 .

[34]  K. Abboud,et al.  Discrete photopatternable pi-conjugated oligomers for electrochromic devices. , 2008, Journal of the American Chemical Society.

[35]  S. Beaupré,et al.  Toward the Development of New Textile/Plastic Electrochromic Cells Using Triphenylamine-Based Copolymers , 2006 .

[36]  J. Reynolds,et al.  Spray Processable Green to Highly Transmissive Electrochromics via Chemically Polymerizable Donor–Acceptor Heterocyclic Pentamers , 2008, Advanced materials.

[37]  Fred Wudl,et al.  Red, Green, and Blue Colors in Polymeric Electrochromics , 2004 .

[38]  K. Oyaizu,et al.  Low-energy driven electrochromic devices using radical polymer as transparent counter electroactive material , 2007 .

[39]  A. L. Dyer,et al.  Orange and Red to Transmissive Electrochromic Polymers Based on Electron-Rich Dioxythiophenes , 2010 .

[40]  J. Reynolds,et al.  Conducting Poly(3,4-alkylenedioxythiophene) Derivatives as Fast Electrochromics with High-Contrast Ratios , 1998 .

[41]  S. Jenekhe,et al.  Efficient Solar Cells from Layered Nanostructures of Donor and Acceptor Conjugated Polymers , 2004 .