Monotonic and cyclic flexural tests on lightweight aggregate concrete beams

Abstract. The work is concerned with an investigation of the advantages stemming from the use of lightweight aggregate concrete in earthquake-resistant reinforced concrete construction. As the aseismic clauses of current codes make no reference to lightweight aggregate concrete beams made of lightweight aggregate concrete but designed in accordance with the code specifications for normal weight aggregate concrete, together with beams made from the latter material, are tested under load mimicking seismic action. The results obtained show that beam behaviour is essentially independent of the design method adopted, with the use of lightweight aggregate concrete being found to slightly improve the post-peak structural behaviour. When considering the significant reduction in deadweight resulting from the use of lightweight aggregate concrete, the results demonstrate that the use of this material will lead to significant savings without compromising the structural performance requirements of current codes.

[1]  Julio A. Ramirez,et al.  Shear Strength of Lightweight Reinforced Concrete Beams , 2004, SP-218: High Performance Structural Lightweight Concrete.

[2]  T. Kang,et al.  Generalized equivalent stress block model considering varying concrete compressive strength and unit weight , 2013 .

[3]  Rafiqul Islam,et al.  Reinforced Lightweight Concrete Beams in Flexure , 2011 .

[4]  R. N. Swamy.  ACI Standard: Standard practice for selecting proportions for structural lightweight concrete: (ACI 211.2-81). Published by the American Concrete Institute, P.O. Box 19150, Redford Station, Detroit, Michigan 48219, USA. Price $7.11 Member Price $5.00 , 1982 .

[5]  Arthur H. Nilson,et al.  Design of concrete structures , 1972 .

[6]  H. Marzouk,et al.  Bond characteristics of high strength lightweight concrete , 2007 .

[7]  J. A. Hanson.  Shear Strength of Lightweight ReinforcedConcrete Beams , 1958 .

[8]  Y. H. Chai,et al.  Seismic response of perforated lightweight aggregate concrete wall panels for low-rise modular classrooms , 2005 .

[10]  Modeling of Direct Load Transmission in Lightweight-Concrete-Core Sandwich Beams , 2009 .

[11]  Afif Hasan,et al.  Optimizing insulation thickness for buildings using life cycle cost , 1999 .

[12]  Jack P. Moehle,et al.  "BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318-11) AND COMMENTARY" , 2011 .

[13]  Shuaib H. Ahmad,et al.  Flexural Behavior of Reinforced High-Strength Lightweight Concrete Beams , 1991 .

[14]  L. Guenduez.  The effects of pumice aggregate/cement ratios on the low-strength concrete properties , 2008 .

[15]  D. Ivey,et al.  Shear Capacity of Lightweight Concrete Beams , 1967 .

[16]  Sung-Gul Hong,et al.  Shear Testing of Steel Fiber-Reinforced Lightweight Concrete Beams without Web Reinforcement , 2011 .

[17]  Eivind Hognestad,et al.  Sheer Strength of Reinforced Structural Lightweight Aggregate Concrete Slabs , 1964 .

[18]  R. Swamy,et al.  Flexural behaviour of reinforced concrete beams made with fly ash coarse aggregates , 1984 .

[19]  Michael J. Boyle,et al.  Standard Practice for Selecting Proportions for Structural Lightweight Concrete (ACI 211.2-98) , 1998 .

[20]  H. Marzouk,et al.  Cyclic Loading of High-Strength Lightweight Concrete Slabs , 2001 .

[21]  Kang Hai Tan,et al.  Effect of Embedment Length of Tension Reinforcement onthe Behavior of Lightweight Concrete Deep Beams , 1996 .

[22]  Mervyn J. Kowalsky,et al.  SHEAR AND FLEXURAL BEHAVIOR OF LIGHTWEIGHT CONCRETE BRIDGE COLUMNS IN SEISMIC REGIONS , 1999 .

[23]  Mohammad Iqbal Khan,et al.  Factors affecting the thermal properties of concrete and applicability of its prediction models , 2002 .

[24]  Shuaib H. Ahmad,et al.  Shear Capacity of Reinforced Lightweight High-Strength Concrete Beams , 1989 .

[25]  Shuaib H. Ahmad,et al.  FLEXURAL BEHAVIOR OF DOUBLY REINFORCED HIGH-STRENGTH LIGHTWEIGHT CONCRETE BEAMS WITH WEB REINFORCEMENT , 1991 .

[26]  A. Neville.  Properties of Concrete , 1968 .

[27]  J. L. Clarke,et al.  Structural lightweight aggregate concrete , 1993 .

[28]  Maurizio Papia,et al.  Steel-concrete bond in lightweight fiber reinforced concrete under monotonic and cyclic actions , 2005 .

[29]  Gerasimos M. Kotsovos.  Seismic design of RC beam-column structural elements , 2011 .

[30]  Ramazan Demirboga,et al.  Thermal conductivity and compressive strength of concrete incorporation with mineral admixtures , 2007 .

[31]  B. G. Rabbat,et al.  Seismic Behavior of Lightweight and Normal Weight Concrete Columns , 1986 .