Optimizing tool orientations for 5-axis machining by configuration-space search method

This paper presents a methodology and algorithms of optimizing and smoothing the tool orientation control for 5-axis sculptured surface machining. A searching method in the machining configuration space (C-space) is proposed to find the optimal tool orientation by considering the local gouging, rear gouging and global tool collision in machining. Based on the machined surface error analysis, a boundary search method is developed first to find a set of feasible tool orientations in the C-space to eliminate gouging and collision. By using the minimum cusp height as the objective function, we first determine the locally optimal tool orientation in the C-space to minimize the machined surface error. Considering the adjacent part geometry and the alternative feasible tool orientations in the C-space, tool orientations are then globally optimized and smoothed to minimize the dramatic change of tool orientation during machining. The developed method can be used to automate the planning and programming of tool path generation for high performance 5-axis sculptured surface machining. Computer implementation and examples are also provided in the paper.

[1]  Bahattin Koc,et al.  Ellipse-offset approach and inclined zig-zag method for multi-axis roughing of ruled surface pockets , 1998, Comput. Aided Des..

[2]  K. Marciniak,et al.  Influence of surface shape in admissible tool positions in 5-axis face milling , 1987 .

[3]  Yuan-Shin Lee,et al.  A shape-generating approach for multi-axis machining G-buffer models , 1999, Comput. Aided Des..

[4]  C. N. Chu,et al.  Effect of cutter mark on surface roughness and scallop height in sculptured surface machining , 1994, Comput. Aided Des..

[5]  Krishnan Suresh,et al.  Constant Scallop-height Machining of Free-form Surfaces , 1994 .

[6]  Yuan-Shin Lee,et al.  2-Phase approach to global tool interference avoidance in 5-axis machining , 1995, Comput. Aided Des..

[7]  Bahattin Koc,et al.  Smoothing STL files by Max‐Fit biarc curves for rapid prototyping , 2000 .

[8]  Gustav J. Olling,et al.  Machining Impossible Shapes , 1999, IFIP — The International Federation for Information Processing.

[9]  Yuan-Shin Lee,et al.  Non-isoparametric tool path planning by machining strip evaluation for 5-axis sculptured surface machining , 1998, Comput. Aided Des..

[10]  J. W. Park,et al.  Cutter-location data optimization in 5-axis surface machining , 1993, Comput. Aided Des..

[11]  C. Ray Asfahl.  Robots and manufacturing automation , 1985 .

[12]  Robert B. Jerard,et al.  5-axis Machining of Sculptured Surfaces with a Flat-end Cutter , 1994, Comput. Aided Des..

[13]  Robert B. Jerard,et al.  Methods for detecting errors in numerically controlled machining of sculptured surfaces , 1989, IEEE Computer Graphics and Applications.

[14]  Radha Sarma,et al.  On local gouging in five-axis sculptured surface machining using flat-end tools , 2000, Comput. Aided Des..

[15]  Chuang-Jang Chiou,et al.  A machining potential field approach to tool path generation for multi-axis sculptured surface machining , 2002, Comput. Aided Des..

[16]  Gershon Elber,et al.  A unified approach to verification in 5-axis freeform milling environments , 1999, Comput. Aided Des..

[17]  Dong-Soo Kim,et al.  A new curve-based approach to polyhedral machining , 2002, Comput. Aided Des..

[18]  Ming-Chuan Leu,et al.  Determination of Flat-End Cutter Orientation in 5-Axis Machining , 1996 .

[19]  Min-Yang Yang,et al.  Verification of NC tool path and manual and automatic editing of NC code , 1995 .

[20]  Min-Yang Yang,et al.  Five-axis CNC milling for effective machining of sculptured surfaces , 1993 .

[21]  Robert B. Jerard,et al.  Sculptured Surface Machining , 1998 .

[22]  Chih-Ching Lo,et al.  Efficient cutter-path planning for five-axis surface machining with a flat-end cutter , 1999, Comput. Aided Des..

[23]  Bert Lauwers,et al.  Optimized NC-toolpath Generation for 5-axis Machining of Complex Surfaces , 1998, SSM.

[24]  Yoshimi Takeuchi,et al.  Five-Axis Control Sculptured Surface Machining Using Conicoid End Mill , 1998, SSM.

[25]  Sanjay E. Sarma,et al.  Generating 5-axis NC roughing paths directly from a tessellated representation , 2000, Comput. Aided Des..

[26]  Yuan-Shin Lee,et al.  Admissible tool orientation control of gouging avoidance for 5-axis complex surface machining , 1997, Comput. Aided Des..

[27]  Yuan-Shin Lee,et al.  Surface interrogation and machining strip evaluation for 5-axis CNC die and mold machining , 1997 .