ICTAC Kinetics Committee recommendations for collecting experimental thermal analysis data for kinetic computations

[1]  Richard Baltensperger,et al.  Determination of thermal hazard from DSC measurements. Investigation of self-accelerating decomposition temperature (SADT) of AIBN , 2014, Journal of Thermal Analysis and Calorimetry.

[2]  Richard Baltensperger,et al.  Prediction of thermal stability of materials by modified kinetic and model selection approaches based on limited amount of experimental points , 2014 .

[3]  N. Koga,et al.  Physico-Geometrical Kinetics of Solid-State Reactions in an Undergraduate Thermal Analysis Laboratory , 2014 .

[4]  Sergey Vyazovkin,et al.  Polymer Melting Kinetics Appears to be Driven by Heterogeneous Nucleation , 2014 .

[5]  M. L. Lorenzo,et al.  Influence of chain structure on crystal polymorphism of poly(lactic acid). Part 1: effect of optical purity of the monomer , 2014, Colloid and Polymer Science.

[6]  M. Abdel-Rahim,et al.  Kinetic analysis of crystallization process of Se-In-Pb glasses—Isoconversion method , 2013 .

[7]  P. Zeman,et al.  Non-isothermal kinetics of phase transformations in magnetron sputtered alumina films with metastable structure , 2013 .

[8]  S. Vyazovkin,et al.  Nucleation‐Driven Kinetics of Poly(ethylene terephthalate) Melting , 2013 .

[9]  R. Androsch,et al.  Crystal Nucleation in Glassy Poly(l-lactic acid) , 2013 .

[10]  M. Eiche,et al.  Heat Exchange Elements in Sample Cells for Thermal Analysis , 2013 .

[11]  M. Pijolat,et al.  Analysis of the kinetic slowing down during carbonation of CaO by CO2 , 2013, Journal of Thermal Analysis and Calorimetry.

[12]  J. Málek,et al.  Crystallization kinetics of amorphous Se , 2013, Journal of Thermal Analysis and Calorimetry.

[13]  Luis A. Pérez-Maqueda,et al.  Kinetic approach to partially overlapped thermal decomposition processes , 2013, Journal of Thermal Analysis and Calorimetry.

[14]  M. L. Lorenzo,et al.  Nonlinear determination of the equilibrium melting temperature from initial nonreorganized crystals of poly(3-hydroxybutyrate) , 2012 .

[15]  S. Stoliarov,et al.  Thermokinetic model of sample response in nonisothermal analysis , 2012 .

[16]  M. Sanchez,et al.  The effect of field-quenching fabrication on the magnetoimpedance response in Co66Fe4Ni1Si15B14 amorphous ribbons , 2012 .

[17]  P. Singh,et al.  Thermodynamical analysis of the glass-forming ability of bulk metallic glasses , 2012, Journal of Thermal Analysis and Calorimetry.

[18]  Pijolat Michele,et al.  From the drawbacks of the Arrhenius-f(α) rate equation towards a more general formalism and new models for the kinetic analysis of solid–gas reactions , 2011 .

[19]  Alan K. Burnham,et al.  ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data , 2011 .

[20]  P. Sajkiewicz,et al.  Optimization of melting conditions for the analysis of crystallization kinetics of poly(3-hydroxybutyrate) , 2009 .

[21]  Sergey Vyazovkin,et al.  Temperature dependence of sol-gel conversion kinetics in gelatin-water system. , 2009, Macromolecular bioscience.

[22]  S. Vyazovkin,et al.  Isoconversional kinetics of glass aging. , 2009, The journal of physical chemistry. B.

[23]  José D. Santos,et al.  Non-isothermal approach to crystallization process of a Co-rich alloy , 2008 .

[24]  Michel Soustelle,et al.  Experimental tests to validate the rate-limiting step assumption used in the kinetic analysis of solid-state reactions , 2008 .

[25]  G. Sui,et al.  Curing kinetics study of epoxy resin/flexible amine toughness systems by dynamic and isothermal DSC , 2008 .

[26]  J. Mathieu,et al.  Evaluating sadt by advanced kinetics-based simulation approach , 2008 .

[27]  K. Chrissafis,et al.  Effect of acid treated multi-walled carbon nanotubes on the mechanical, permeability, thermal properties and thermo-oxidative stability of isotactic polypropylene , 2008 .

[28]  J. M. Salla,et al.  Novel thermosets obtained by UV-induced cationic copolymerization of DGEBA with an spirobislactone , 2007 .

[29]  M. L. Lorenzo,et al.  Poly(butylene terephthalate)/poly(ε-caprolactone) blends : Influence of PCL molecular mass on PBT melting and crystallization behavior , 2007 .

[30]  N. Guigo,et al.  Chemorheological analysis and model-free kinetics of acid catalysed furfuryl alcohol polymerization. , 2007, Physical chemistry chemical physics : PCCP.

[31]  Xiao Hu,et al.  A variable reaction order model for prediction of curing kinetics of thermosetting polymers , 2007 .

[32]  M. Pijolat,et al.  Mechanism of growth of MgO and CaCO3 during a dolomite partial decomposition , 2007 .

[33]  N. Sbirrazzuoli,et al.  Isoconversional kinetic analysis of stoichiometric and off-stoichiometric epoxy-amine cures , 2006 .

[34]  Ammar Khawam,et al.  Solid-state kinetic models: basics and mathematical fundamentals. , 2006, The journal of physical chemistry. B.

[35]  C. Schick,et al.  Verifying the symmetry of differential scanning calorimeters concerning heating and cooling using liquid crystal secondary temperature standards , 2006 .

[36]  P. Sajkiewicz,et al.  Irregularly shaped DSC exotherms in the analysis of polymer crystallization , 2006 .

[37]  Jinwu Wang,et al.  Comparison of model-free kinetic methods for modeling the cure kinetics of commercial phenol-formaldehyde resins , 2005 .

[38]  M. Pijolat,et al.  Experimental test to validate the rate equation "dα/dt = kf (α)" used in the kinetic analysis of solid state reactions , 2005 .

[39]  E. Frykberg,et al.  Triage: Principles and Practice , 2005, Scandinavian journal of surgery : SJS : official organ for the Finnish Surgical Society and the Scandinavian Surgical Society.

[40]  M. Pijolat,et al.  Oxidation kinetics of ZrNbO in steam: differences between the pre-and post-transition stages , 2005 .

[41]  N. Koga,et al.  Kinetic Analyses of Solid‐State Reactions with a Particle‐Size Distribution , 2005 .

[42]  A. Burnham,et al.  Thermal Decomposition Kinetics of HMX , 2004 .

[43]  S. Vyazovkin,et al.  A DSC study of α- and β-relaxations in a PS-Clay system , 2004 .

[44]  M. Vincent,et al.  Curing kinetics and chemorheological analysis of polyurethane formation , 2004 .

[45]  Sergey Vyazovkin,et al.  A Study of Epoxy-Amine Cure Kinetics by Combining Isoconversional Analysis with Temperature Modulated DSC and Dynamic Rheometry , 2003 .

[46]  B. Riedl,et al.  Phenol‐urea‐formaldehyde cocondensed resol resins: Their synthesis, curing kinetics, and network properties , 2003 .

[47]  N. Koga,et al.  Magnetic Temperature Standards for TG , 2003 .

[48]  Michel Soustelle,et al.  Differences in reactivity of oxide growth during the oxidation of Zircaloy-4 in water vapour before and after the kinetic transition , 2003 .

[49]  F. Román,et al.  Vitrification and dielectric relaxation during the isothermal curing of an epoxy–amine resin , 2003 .

[50]  S. Perrin.  Modélisation de la cinétique de transformations non isothermes et (ou) non isobares. Application à la déshydroxylation de la kaolinite et à la réduction de l'octooxyde de triuranium par l'hydrogène , 2002 .

[51]  S. Kaloshkin,et al.  DSC studies of finemet-type glass-coated microwires , 2002 .

[52]  Haruhiko Tanaka,et al.  A physico-geometric approach to the kinetics of solid-state reactions as exemplified by the thermal dehydration and decomposition of inorganic solids , 2002 .

[53]  N. Ariguib,et al.  Nucleation and anisotropic growth model for isothermal kaolinite dehydroxylation under controlled water vapour pressure , 2002 .

[54]  V. L. Zvetkov,et al.  Comparative DSC kinetics of the reaction of DGEBA with aromatic diamines. II. Isothermal kinetic study of the reaction of DGEBA with m-phenylene diamine , 2002 .

[55]  S. Cimmino,et al.  Nonisothermal crystallization of isotactic polypropylene blended with poly(α‐pinene). I. Bulk crystallization , 2001 .

[56]  M. Pijolat,et al.  Kinetic study of the oxidation by oxygen of liquid Al-Mg 5%alloys , 2001 .

[57]  V. L. Zvetkov,et al.  Comparative DSC kinetics of the reaction of DGEBA with aromatic diamines. , 2001 .

[58]  Sergey Vyazovkin,et al.  Thermal Dissociation Kinetics of Solid and Liquid Ammonium Nitrate , 2001 .

[59]  J. Málek.  Kinetic analysis of crystallization processes in amorphous materials , 2000 .

[60]  A. Galwey,et al.  Structure and order in thermal dehydrations of crystalline solids , 2000 .

[61]  E. Gmelin,et al.  Temperature, heat and heat flow rate calibration of differential scanning calorimeters , 2000 .

[62]  Sergey Vyazovkin,et al.  Effect of viscosity on the kinetics of initial cure stages , 2000 .

[63]  N. Koga,et al.  Apparent kinetic behavior of the thermal decomposition of synthetic malachite , 1999 .

[64]  Sergey Vyazovkin,et al.  Kinetic methods to study isothermal and nonisothermal epoxy-anhydride cure , 1999 .

[65]  N. Sbirrazzuoli,et al.  Isothermal and Non-Isothermal Kinetics When Mechanistic Information Available , 1999 .

[66]  H. Bockhorn,et al.  Modelling of isothermal and dynamic pyrolysis of plastics considering non-homogeneous temperature distribution and detailed degradation mechanism , 1999 .

[67]  M. Pijolat,et al.  Reduction by hydrogen of U3O8 into UO2: Nucleation and growth, influence of hydration , 1999 .

[68]  P. K. Gallagher,et al.  Handbook of thermal analysis and calorimetry , 1998 .

[69]  N. Koga,et al.  The influence of mass transfer phenomena on the kinetic analysis for the thermal decomposition of calcium carbonate by constant rate thermal analysis (CRTA) under vacuum , 1998 .

[70]  G. Höhne,et al.  Metrologically based procedures for the temperature, heat and heat flow rate calibration of DSC , 1997 .

[71]  J. Menczel.  Temperature calibration of heat flux DSC's on cooling , 1997 .

[72]  S. Vyazovkin.  Evaluation of activation energy of thermally stimulated solid‐state reactions under arbitrary variation of temperature , 1997 .

[73]  G. Assche,et al.  Modulated differential scanning calorimetry: Non-isothermal cure, vitrification, and devitrification of thermosetting systems , 1996 .

[74]  A. Galwey,et al.  Thermal Dehydration of Crystalline Hydrates: Microscopic Studies and Introductory Experiments to the Kinetics of Solid-State Reactions , 1995 .

[75]  J. Cruz-Pinto,et al.  The isothermal crystallization of engineering polymers — POM and PEEK , 1994 .

[76]  J. Šesták,et al.  Data Treatment in Non-isothermal Kinetics and Diagnostic Limits of Phenomenological Models , 1993 .

[77]  D. Dollimore,et al.  The effect of the reaction heat on kinetic analysis by TG under a rising temperature program. Part 1 , 1993 .

[78]  N. Koga,et al.  Effect of sample mass on the kinetics of thermal decomposition of a solid , 1992 .

[79]  J. N. Hay,et al.  The crystallinity of poly(ether ether ketone) , 1992 .

[80]  N. Koga,et al.  Self-cooling effect on the kinetics of nonisothermal dehydration of lithium sulfate monohydrate , 1990 .

[81]  Günther W. H. Höhne,et al.  The temperature calibration of scanning calorimeters , 1990 .

[82]  U. Ceipidor,et al.  Using thermoanalytical data. Part 2. The dependence of kinetic data available from thermogravimetry on sample and instrument parameters: a method for calculating ‘true’ kinetic parameters , 1990 .

[83]  U. Ceipidor,et al.  Using thermoanalytical data: Part 1. The power of kinetic parameters determined from thermogravimetry to describe the experimental behaviour of the sample , 1990 .

[84]  S. Alves.  Simple estimation of the temperature error in thermogravimetric experiments , 1990 .

[85]  Yoshiharu Doi,et al.  Thermal degradation of microbial copolyesters: poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate) , 1990 .

[86]  K. Ninan,et al.  Thermal decomposition kinetics: Part XVII. Kinetics and mechanism of thermal decomposition of bis(ethylenediamine)copper(II) halide monohydrate , 1989 .

[87]  J. Armand,et al.  Effect of the value of heating rate in DSC on the kinetic parameters, when there is high enthalpy of reaction , 1988 .

[88]  S. Risbud,et al.  Kinetics of phase transformations in amorphous materials by DSC. Part I , 1988 .

[89]  J. Haudin,et al.  Thermal dependence of nucleation and growth rate in polypropylene by non isothermal calorimetry , 1986 .

[90]  K. Ninan.  Thermal decomposition kinetics. XIII. Effect of sample mass on the thermal decomposition kinetics of CaC2O4 · H2O from isothermal mass-loss data , 1984 .

[91]  A. McGhie,et al.  Thermogravimetric apparatus temperature calibration using melting point standards , 1983 .

[92]  G. Várhegyi.  The effects of imperfect temperature programming on the kinetic evaluation of thermoanalytical curves. Part 3. Error bounds for the activation energy and the formal reaction order , 1983 .

[93]  J. N. Hay,et al.  Use of differential scanning calorimetry to study polymer crystallization kinetics , 1982 .

[94]  E. Turi,et al.  Thermal characterization of polymeric materials , 1981 .

[95]  Bernhard Wunderlich,et al.  CHAPTER 2 – The Basis of Thermal Analysis , 1981 .

[96]  D. W. Johnson,et al.  The effects of sample size and heating rate on the kinetics of the thermal decomposition of CaCO3 , 1973 .

[97]  B. Wunderlich,et al.  Annealing during polymerization of crystalline poly(ethylene terephthalate) , 1972 .

[98]  B. Wunderlich,et al.  Etching of crystalline poly(ethylene terephthalate) by hydrolysis , 1972 .

[99]  A. B. Taubman,et al.  Strahlenchemische pfropfung aus der monomerdampfphase von polymeren an der oberfläche von füllstoffen als methode ihrer aktivierung , 1972 .

[100]  B. Wunderlich,et al.  Superheating and reorganization on melting of poly(ethylene terephthalate) , 1972 .

[101]  W. Garner.  Chemistry of the solid state , 1955 .

[102]  J. Hedvall.  Changes in Crystal Structure and Their Influence on the Reactivity and Catalytic Effect of Solids. , 1934 .