Impact of DEM accuracy and resolution on topographic indices

Topography is an important land-surface characteristic that affects most aspects of the water balance in a catchment, including the generation of surface and sub-surface runoff; the flow paths followed by water as it moves down and through hillslopes and the rate of water movement. All of the spatially explicit fully distributed hydraulic and hydrological models use topography (represented by the DEM of the area modelled) to derive bathymetry. DEM is also used to derive some other key information critical in fully distributed hydraulic and hydrological models. With high-resolution DEMs such as LiDAR (Light Detection and Ranging) becoming more readily available and also with the advancements in computing facilities which can handle these large data sets, there is a need to quantify the impact of using different resolution DEMs (e.g. 1 m against 10 m or 25 m) on hydrologically important variables and the loss of accuracy and reliability of the results as we move from high resolution to coarser resolution. The results from statistical analysis carried out to compare field survey elevations with the LiDAR DEM-derived elevations, show that there are small differences between the two data sets but LiDAR DEM is a reasonably good representation of the actual ground surface compared to other commonly used DEMs derived from contour maps. The results from the analysis clearly show that the accuracy and resolution of the input DEM have serious implications on the values of the hydrologically important spatial indices derived from the DEM. The result also indicates that the loss of details by re-sampling the higher resolution DEM to coarser resolution are much less compared to the details captured in the commonly available coarse resolution DEM derived from contour maps. Topographic indices based on contour derived DEMs should be used with caution and where available, the higher resolution DEM should be used instead of the coarse resolution one.