Solar drying of henna (Lawsonia inermis) using different models of solar flat plate collectors: an experimental investigation in the region of Biskra (Algeria)

In this article, an experimental study is presented in two parts: First, the best performing solar dryer is selected between two models of flat plate solar collectors (FPCs). The second part investigates the drying behavior of henna (Lawsonia alba, syn. Lawsonia inermis Linn.) using the best selected FPC. The aim of this study is to get a clean product in a reduced time by using solar FPCs. Therefore, we first present the results of an experimental investigation on the thermal performances and pressure drops of two models of FPCs for indirect drying applications: i) simple-pass collector with trapezoidal obstacles (model I) and ii) double pass collector with trapezoidal obstacles in the air flow duct (model II). In the second part, we compare different methods of henna drying; we have proceeded to the application of the best indirect dryer (model II) for drying of henna under climatic conditions of Biskra, Algeria. As a result, some conclusions are made on the drying behavior of henna by the study of the influence of: drying process, air flow rate and masse of the product on the drying kinetic of the product for the forced convection hot air drying and their temperature dependence.

[1]  Michael Bantle,et al.  A study of the energy efficiency of convective drying systems assisted by ultrasound in the production of clipfish , 2014 .

[2]  Amir Rahimi,et al.  Dynamic Modeling and a Parametric Study of an Indirect Solar Cabinet Dryer , 2011 .

[3]  O. V. Ekechukwu.  Review of solar-energy drying systems I: an overview of drying principles and theory , 1999 .

[4]  Abdul Jabbar N. Khalifa,et al.  Testing of the performance of a fruit and vegetable solar drying system in Iraq , 2007 .

[5]  Abdelhafid Moummi,et al.  Etude théorique et expérimentale des performances d’un capteur solaire plan à air muni d’une nouvelle forme de rugosité artificielle , 2009 .

[6]  Azharul Karim,et al.  Performance investigation of flat plate, v-corrugated and finned air collectors , 2006 .

[7]  N. Moummi,et al.  Effect of Different Parameters on the Solar Drying of Henna; Experimental Investigation in the Region of Biskra (Algeria) , 2015 .

[8]  Riccardo Battisti,et al.  Environmental assessment of solar thermal collectors with integrated water storage , 2005 .

[9]  Christopher J. Koroneos,et al.  Exergy analysis and life cycle assessment of solar heating and cooling systems in the building environment , 2012 .

[10]  Ahmed A. Hassanain,et al.  Unglazed Transpired Solar Dryers for Medicinal Plants , 2010 .

[11]  Turan Çalban,et al.  The Effects of Bed Height and Initial Moisture Concentration on Drying Lignite in a Batch Fluidized Bed , 2006 .

[12]  M. L. Ray,et al.  Experimental study of thermal performance improvement of a solar air flat plate collector through the use of obstacles: application for the drying of ‘yellow onion’ , 1999 .

[13]  Soteris A. Kalogirou,et al.  Solar thermal collectors and applications , 2004 .

[14]  M. Mohanraj,et al.  Performance of a forced convection solar drier integrated with gravel as heat storage material , 2009 .

[15]  Abdelhafid Moummi,et al.  Energy analysis of a solar air collector with rows of fins , 2004 .

[16]  Adel Benchabane,et al.  Experimental investigation of various designs of solar flat plate collectors: Application for the drying of green chili , 2012 .

[17]  I. Chang,et al.  Development of clean technology in wafer drying processes , 2001 .

[18]  M. L. Ray,et al.  Study of a solar air flat plate collector: use of obstacles and application for the drying of grape , 2004 .

[19]  Adel Benchabane,et al.  Thermal performance improvement of solar air flat plate collector: a theoretical analysis and an experimental study in Biskra, Algeria , 2011 .

[20]  Abdelhafid Moummi,et al.  Performance investigation of single- and double-pass solar air heaters through the use of various fin geometries , 2012 .

[21]  Chawki Mahboub,et al.  Systematic forecasts of solar collector's performance in various sites of different climates in Algeria , 2010 .

[22]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[23]  Adel Benchabane,et al.  Applicability of solar desiccant cooling systems in Algerian Sahara: Experimental investigation of flat plate collectors , 2015 .

[24]  A. Al-Jabri,et al.  In-vitro antimicrobial activity of Lawsonia inermis Linn (henna). A pilot study on the Omani henna. , 2005, Saudi medical journal.

[25]  Hikmet Esen,et al.  Experimental energy and exergy analysis of a double-flow solar air heater having different obstacles on absorber plates , 2008 .

[26]  Christopher J. Koroneos,et al.  Life cycle environmental impact assessment of a solar water heater , 2012 .