论文信息 - Novel current-mode all-pass phase shifter using a current conveyor

Novel current-mode all-pass phase shifter using a current conveyor

Using a single second-generation current conveyor (CC II), a current-mode second-order all-pass phase shifter network is proposed. The novelties of the network are the availability of high output impedance, the use of grounded capacitors, and the insensitivity of phase shift relative to the CC II device nonideality. >

Rabindranath Nandi

[1] Brett Wilson. Differential current-follower and conveyor using new mirror formulation , 1986 .

[2] R. Nandi,et al. Novel insensitive lossless inductor simulation through inverse function generation , 1980 .

[3] Yutaka Fukui,et al. Research note Realization of all-pass networks using a current conveyor , 1988 .

[4] Kenneth C. Smith,et al. Biquadratic filter sections employing a single current conveyor , 1986 .

[5] M. A. Tan,et al. Design of a general biquadratic filter section with only transconductances and grounded capacitors , 1988 .

[6] Brett Wilson,et al. Current mode signal processing circuits , 1988, 1988., IEEE International Symposium on Circuits and Systems.

[7] Brett Wilson. High-performance current conveyor implementation , 1984 .

[8] M. Higashimura,et al. Realization of current mode all-pass networks using a current conveyor , 1990 .

[9] Umesh Kumar,et al. Recent developments in current conveyors and their applications , 1985 .

[10] Alain Fabre,et al. High performance current processing allpass filters , 1989 .

[11] Wanlop Surakampontorn,et al. Integrable electronically tunable current conveyors , 1988 .

[12] K. Smith,et al. A second-generation current conveyor and its applications , 1970, IEEE Transactions on Circuit Theory.

[13] José L. Huertas. Circuit implementation of current conveyor , 1980 .

[14] J. A. Svoboda,et al. Current conveyors, operational amplifiers and nullors , 1989 .