A dual crosslinking strategy to tailor rheological properties of gelatin methacryloyl

3D bioprinting is an emerging technology that enables the fabrication of three-dimensional organised cellular constructs. One of the major challenges in 3D bioprinting is to develop a material to meet the harsh requirements (cell-compatibility, printability, structural stability post-printing and bio-functionality to regulate cell behaviours) suitable for printing. Gelatin methacryloyl (GelMA) has recently emerged as an attractive biomaterial in tissue engineering because it satisfies the requirements of bio-functionality and mechanical tunability. However, poor rheological property such as low viscosity at body temperature inhibits its application in 3D bioprinting. In this work, an enzymatic crosslinking method triggered by Ca2+-independent microbial transglutaminase (MTGase) was introduced to catalyse isopeptide bonds formation between chains of GelMA, which could improve its rheological behaviours, specifically its viscosity. By combining enzymatic crosslinking and photo crosslinking, it is possible to tune the solution viscosity and quickly stabilize the gelatin macromolecules at the same time. The results showed that the enzymatic crosslinking can increase the solution viscosity. Subsequent photo crosslinking could aid in fast stabilization of the structure and make handling easy.

[1]  Yongnian Yan,et al.  Direct Construction of a Three-dimensional Structure with Cells and Hydrogel , 2005 .

[2]  Ali Khademhosseini,et al.  Micromolding of shape-controlled, harvestable cell-laden hydrogels. , 2006, Biomaterials.

[3]  Anthony Atala,et al.  3D bioprinting of tissues and organs , 2014, Nature Biotechnology.

[4]  Li Lin,et al.  Rheological study on 3D printability of alginate hydrogel and effect of graphene oxide , 2016 .

[5]  A. Khademhosseini,et al.  Cell-laden microengineered gelatin methacrylate hydrogels. , 2010, Biomaterials.

[6]  F. Lin,et al.  Generation of three-dimensional hepatocyte/gelatin structures with rapid prototyping system. , 2006, Tissue engineering.

[7]  Dong-Woo Cho,et al.  A comparative study on collagen type I and hyaluronic acid dependent cell behavior for osteochondral tissue bioprinting , 2014, Biofabrication.

[8]  Hitomi Shirahama,et al.  Precise Tuning of Facile One-Pot Gelatin Methacryloyl (GelMA) Synthesis , 2016, Scientific Reports.

[9]  Paul N Manson,et al.  Variable cytocompatibility of six cell lines with photoinitiators used for polymerizing hydrogels and cell encapsulation. , 2005, Biomaterials.

[10]  A. Khademhosseini,et al.  Directed assembly of cell-laden microgels for fabrication of 3D tissue constructs , 2008, Proceedings of the National Academy of Sciences.

[11]  Kristi S Anseth,et al.  Advances in bioactive hydrogels to probe and direct cell fate. , 2012, Annual review of chemical and biomolecular engineering.

[12]  B. Duan,et al.  3D bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels. , 2013, Journal of biomedical materials research. Part A.

[13]  Marek Kieliszek,et al.  Microbial transglutaminase and its application in the food industry. A review , 2013, Folia Microbiologica.

[14]  F. Lin,et al.  Three-dimensional Gelatin and Gelatin/Hyaluronan Hydrogel Structures for Traumatic Brain Injury , 2007 .

[15]  Lay Poh Tan,et al.  Efficient and controllable synthesis of highly substituted gelatin methacrylamide for mechanically stiff hydrogels , 2015 .

[16]  Y. Shanjani,et al.  A novel bioprinting method and system for forming hybrid tissue engineering constructs , 2015, Biofabrication.

[17]  Jos Malda,et al.  Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair. , 2016, Trends in biotechnology.

[18]  Daidi Fan,et al.  A novel smart injectable hydrogel prepared by microbial transglutaminase and human-like collagen: Its characterization and biocompatibility. , 2016, Materials science & engineering. C, Materials for biological applications.

[19]  Wim E Hennink,et al.  25th Anniversary Article: Engineering Hydrogels for Biofabrication , 2013, Advanced materials.

[20]  S. Van Vlierberghe,et al.  Bioink properties before, during and after 3D bioprinting , 2016, Biofabrication.

[21]  A. Khademhosseini,et al.  Hydrogels in Biology and Medicine: From Molecular Principles to Bionanotechnology , 2006 .

[22]  Achim Goepferich,et al.  Rational design of hydrogels for tissue engineering: impact of physical factors on cell behavior. , 2007, Biomaterials.

[23]  P. Dubruel,et al.  The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability. , 2014, Biomaterials.

[24]  Wei Sun,et al.  Bioprinting endothelial cells with alginate for 3D tissue constructs. , 2009, Journal of biomechanical engineering.

[25]  S. Hofmann,et al.  Controlled Positioning of Cells in Biomaterials—Approaches Towards 3D Tissue Printing , 2011, Journal of functional biomaterials.

[26]  Ralph Müller,et al.  Tunable hydrogel composite with two-step processing in combination with innovative hardware upgrade for cell-based three-dimensional bioprinting. , 2014, Acta biomaterialia.

[27]  P. R. van Weeren,et al.  Gelatin-methacrylamide hydrogels as potential biomaterials for fabrication of tissue-engineered cartilage constructs. , 2013, Macromolecular bioscience.

[28]  Sanskrita Das,et al.  Enhanced redifferentiation of chondrocytes on microperiodic silk/gelatin scaffolds: toward tailor-made tissue engineering. , 2013, Biomacromolecules.

[29]  P. Gatenholm,et al.  3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications. , 2015, Biomacromolecules.

[30]  H. Park,et al.  Influence of Transglutaminase‐Induced Cross‐Linking on Properties of Fish Gelatin Films , 2006 .

[31]  D. Darby,et al.  Effects of transglutaminase-induced cross-linking on properties of fish gelatin-nanoclay composite film , 2009 .

[32]  Alessandro Giacomello,et al.  Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells. , 2012, Biomaterials.

[33]  T. Scheibel,et al.  Strategies and Molecular Design Criteria for 3D Printable Hydrogels. , 2016, Chemical reviews.

[34]  A. Khademhosseini,et al.  Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels. , 2015, Biomaterials.

[35]  F. Lin,et al.  Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique. , 2005, Biomaterials.

[36]  M. K. McDermott,et al.  Mechanical properties of biomimetic tissue adhesive based on the microbial transglutaminase-catalyzed crosslinking of gelatin. , 2004, Biomacromolecules.

[37]  Akhilesh K. Gaharwar,et al.  Polymers for Bioprinting , 2015 .

[38]  Bon Kang Gu,et al.  3-dimensional bioprinting for tissue engineering applications , 2016, Biomaterials Research.

[39]  G. Abouna.  Organ shortage crisis: problems and possible solutions. , 2008, Transplantation proceedings.