Erosion prediction of industrial conveying pipelines

Abstract In this paper, a new concept of the one-dimensional erosion model (ODEM) is presented, validated, and implemented for a pneumatic conveying system. The ODEM is a combination of a one-dimensional flow model and statistical distribution functions that describe the particle-wall collision characteristics. Computational fluid dynamics/discrete element method (CFD-DEM) simulations serve as a numerical tool for deriving the statistical functions of the collision characteristics and as a basis for ODEM validation. Both the ODEM and the CFD-DEM are implemented for the same pneumatic conveying system in order to compare their performances. The developed statistical functions for straight pipes and bends include collision frequency, circumference angle, impact angle, and impact velocity magnitude. An additional bend angle function is developed for bends. It is found that most of the parameters can be formulated by a single distribution function that describes all the sections of the system. A distinct feature is discovered, i.e., using a non-dimensional form of the impact velocity function (the ratio of the impact velocity magnitude to the median impact velocity) yields similar statistical distributions for all bends and straight sections in the conveying system. Furthermore, the median impact velocity is correlated with particle axial velocity. Therefore, this non-dimensional form can be used in a wide range of applications for estimating the distribution of the impact velocity of particles in dilute pneumatic conveying. The statistical functions describe each parameter independently, which means that they can be measured or computed regardless of one another, thereby facilitating fast and easy erosion prediction. The erosion rate results of the ODEM and the DEM for the entire conveying system are found to be in excellent agreement (straight sections and bends). This validates the ODEM as a tool for predicting the erosion rate in conveying lines, including bends and straight sections, at a much faster rate than 3D CFD-DEM simulations (the computation time ratio is estimated to be 1/54).

[1]  Siamack A. Shirazi,et al.  Development of mechanistic erosion equation for solid particles , 2015 .

[2]  Y. Oka,et al.  Relationship between surface hardness and erosion damage caused by solid particle impact , 1993 .

[3]  Haixiao Liu,et al.  A probability model for solid particle erosion in a straight pipe , 2013 .

[4]  Haim Kalman,et al.  A novel particle attrition model for conveying systems , 2016 .

[5]  Satish Chandra Jain,et al.  Effect of erodent properties on erosion wear of ductile type materials , 2006 .

[6]  Edmund F. Rybicki,et al.  Comparison of computed and measured particle velocities and erosion in water and air flows , 2007 .

[7]  Avi Levy,et al.  Modelling the particles impingement angle to produce maximum erosion , 2016 .

[8]  Xuewen Cao,et al.  Numerical simulation of solid particle erosion in pipe bends for liquid–solid flow , 2016 .

[9]  Krishnaswamy Nandakumar,et al.  A comprehensive phenomenological model for erosion of materials in jet flow , 2008 .

[10]  Haim Kalman,et al.  DEM simulation of particle attrition in dilute-phase pneumatic conveying , 2011 .

[11]  J. Bitter.  A study of erosion phenomena part I , 1963 .

[12]  N. Huber,et al.  Experimental analysis and modelling of particle-wall collisions , 1999 .

[13]  Ronald E. Vieira,et al.  Experimental and computational study of erosion in elbows due to sand particles in air flow , 2016 .

[14]  Chong Y. Wong,et al.  An experimental and numerical analysis of erosion caused by sand pneumatically conveyed through a standard pipe elbow , 2015 .

[15]  W. Tabakoff,et al.  Aerodynamic Effects on Erosion in Turbomachinery , 1977 .

[16]  O. Levenspiel,et al.  Drag coefficient and terminal velocity of spherical and nonspherical particles , 1989 .

[17]  A. Gosman,et al.  Aspects of Computer Simulation of Liquid-Fueled Combustors , 1983 .

[18]  Haim Kalman,et al.  Fragments spawning and interaction models for DEM breakage simulation , 2011 .

[19]  Yutaka Tsuji,et al.  Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe , 1992 .

[20]  C. B. Solnordal,et al.  Predicting the material loss around a hole due to sand erosion , 2012 .

[21]  I. Finnie.  Erosion of surfaces by solid particles , 1960 .

[22]  Mingyan Liu,et al.  A probability model of predicting the sand erosion profile in elbows for gas flow , 2015 .

[23]  J. H. Neilson,et al.  Erosion by a stream of solid particles , 1968 .

[24]  Y. Oka,et al.  Practical estimation of erosion damage caused by solid particle impact: Part 1: Effects of impact parameters on a predictive equation , 2005 .

[25]  Kenneth C. Williams,et al.  Wear mechanisms in dense phase pneumatic conveying of alumina , 2008 .