Fault tolerant control for two collaborative systems using output regulation scheme

In this paper a novel collaborative fault tolerant control scheme is presented. To simplify the presentation, only two collaborative subsystems are considered where the state space model is used. To diagnose the faults, adaptive diagnostic observers are used respectively, and the adaptive tuning rule for estimating the faults have been obtained. Based upon the fault diagnosis, a fault tolerant control strategy has been proposed which is capable of controlling a healthy subsystem so that the two systems can still deliver a common working goal. A simulated example is given and desired results have been obtained.

[1]  Zhiwei Gao,et al.  Descriptor observer approaches for multivariable systems with measurement noises and application in fault detection and diagnosis , 2006, Syst. Control. Lett..

[2]  Andrea Serrani,et al.  Adaptive Robust Output Regulation of Uncertain Linear Periodic Systems , 2009, IEEE Transactions on Automatic Control.

[3]  Zhiwei Gao,et al.  High-gain observer-based parameter identification with application in a gas turbine engine , 2008 .

[4]  Achim Ilchmann,et al.  Non-Identifier-Based High-Gain Adaptive Control , 1993 .

[5]  Mogens Blanke,et al.  Fault-tolerant control systems — A holistic view , 1997 .

[6]  A. Isidori,et al.  Output regulation of nonlinear systems , 1990 .

[7]  Didier Theilliol,et al.  Fault-tolerant control in dynamic systems: application to a winding machine , 2000 .

[8]  Jie Chen,et al.  Robust Model-Based Fault Diagnosis for Dynamic Systems , 1998, The International Series on Asian Studies in Computer and Information Science.

[9]  Jie Huang,et al.  Nonlinear Output Regulation: Theory and Applications , 2004 .

[10]  Zhiwei Gao,et al.  High-Gain Estimator and Fault-Tolerant Design With Application to a Gas Turbine Dynamic System , 2007, IEEE Transactions on Control Systems Technology.

[11]  Marios M. Polycarpou.  Fault accommodation of a class of multivariable nonlinear dynamical systems using a learning approach , 2001, IEEE Trans. Autom. Control..

[12]  Didier Georges,et al.  Robust fault-tolerant control for descriptor systems , 2004, IEEE Transactions on Automatic Control.

[13]  Hong Wang,et al.  Actuator fault diagnosis: an adaptive observer-based technique , 1996, IEEE Trans. Autom. Control..

[14]  Daniel W. C. Ho,et al.  State/noise estimator for descriptor systems with application to sensor fault diagnosis , 2006, IEEE Transactions on Signal Processing.

[15]  C. Byrnes.  Output Regulation of Uncertain Nonlinear Systems , 1997 .

[16]  Ron J. Patton.  Robustness issues in fault-tolerant control , 1993 .

[17]  Damien Koenig,et al.  Unknown input proportional multiple-integral observer design for linear descriptor systems: application to state and fault estimation , 2005, IEEE Transactions on Automatic Control.

[18]  Bin Jiang,et al.  Observer-based Fault Tolerant Control for Constrained Switched Systems , 2007 .

[19]  Lina Yao,et al.  A fault tolerant control scheme for collaborative two sub-systems , 2005, Proceedings of the 2005 IEEE International Symposium on, Mediterrean Conference on Control and Automation Intelligent Control, 2005..

[20]  Rolf Isermann,et al.  Fault-Diagnosis Systems , 2005 .

[21]  S. Ding,et al.  Fault estimation and fault-tolerant control for descriptor systems via proportional, multiple-integral and derivative observer design , 2007 .

[22]  Benjamin C. Kuo,et al.  AUTOMATIC CONTROL SYSTEMS , 1962, Universum:Technical sciences.

[23]  A. Bejczy,et al.  Dynamic coordinated control of two robot manipulators , 1989, Proceedings of the 28th IEEE Conference on Decision and Control,.

[24]  P. Kaboré,et al.  Disturbance attenuation using proportional integral observers , 2001 .

[25]  H. Niemann,et al.  A fault tolerant control approach for descriptor systems , 2005, Proceedings of the 2005, American Control Conference, 2005..

[26]  N. E. Wu,et al.  Concepts and methods in fault-tolerant control , 2001, Proceedings of the 2001 American Control Conference. (Cat. No.01CH37148).

[27]  D. Sauter,et al.  Fault tolerant control using augmented fault detection filter , 2004, 2004 IEEE International Symposium on Industrial Electronics.

[28]  Hong Wang,et al.  Neural-network-based fault-tolerant control of unknown nonlinear systems , 1999 .

[29]  William R. Perkins,et al.  Design of reliable control systems , 1992 .

[30]  Ron J. Patton,et al.  FAULT-TOLERANT CONTROL SYSTEMS: THE 1997 SITUATION , 1997 .

[31]  Karl Johan Åström,et al.  Adaptive Control , 1989, Embedded Digital Control with Microcontrollers.

[32]  Hassan Noura,et al.  Fault diagnosis and reconfiguration of systems using fuzzy logic: application to a thermal plant† , 1993 .

[33]  Halim Alwi,et al.  Fault tolerant control using sliding modes with on-line control allocation , 2008, Autom..

[34]  Riccardo Marino,et al.  Output Regulation for Linear Minimum Phase Systems with Unknown Order Exosystem , 2005, Proceedings of the 44th IEEE Conference on Decision and Control.

[35]  Luigi Villani,et al.  Fault Diagnosis and Fault Tolerance for Mechatronic Systems: Recent Advances , 2003 .

[36]  H. Niemann.  Fault tolerant control based on active fault diagnosis , 2005, Proceedings of the 2005, American Control Conference, 2005..

[37]  S. Lefschetz.  Stability of nonlinear control systems , 1966 .

[38]  Chee Pin Tan,et al.  Fault tolerant control using sliding mode observers , 2004, 2004 43rd IEEE Conference on Decision and Control (CDC) (IEEE Cat. No.04CH37601).

[39]  Stephen Kahne.  Automatic control systems: Benjamin C. Kuo , 1983, Autom..

[40]  Hong Wang,et al.  Design of fault diagnosis filters and fault-tolerant control for a class of nonlinear systems , 2001, IEEE Trans. Autom. Control..