Optimizing the Design Proportion of High-Performance Concrete via Using Response Surface Method

[1]  Yong Zhou,et al.  Effects of nano-SiO2, nano-CaCO3 and nano-TiO2 on properties and microstructure of the high content calcium silicate phase cement (HCSC) , 2022, Construction and Building Materials.

[2]  Jeonghwan Kim,et al.  Response surface methodology to investigate the effects of operational parameters on membrane fouling and organic matter rejection in hard-shell encased hollow-fiber membrane. , 2021, Chemosphere.

[3]  T. Ozbakkaloglu,et al.  Evaluating the Properties of Concrete Pavements Containing Crumb Rubber and Recycled Steel Fibers Using Response Surface Methodology , 2021, International Journal of Pavement Research and Technology.

[4]  Surendra P. Shah,et al.  Comparison on the properties of ITZs in fly ash-based geopolymer and Portland cement concretes with equivalent flowability , 2021 .

[5]  Zhiping Li,et al.  Optimization of mixture proportions by statistical experimental design using response surface method - A review , 2021 .

[6]  Hammad Ahmed Shah,et al.  Air entrainment in fresh concrete and its effects on hardened concrete-a review , 2021 .

[7]  Ayesha Ferdous Mita,et al.  Prediction and optimization of the fresh and hardened properties of concrete containing rice husk ash and glass fiber using response surface methodology , 2021 .

[8]  M. Napiah,et al.  Design optimization and statistical modeling of cementitious grout containing irradiated plastic waste and silica fume using response surface methodology , 2021, Construction and Building Materials.

[9]  Mohammed Majeed Hameed,et al.  Prediction of high-strength concrete: high-order response surface methodology modeling approach , 2021, Engineering with Computers.

[10]  A. Sulaiman,et al.  The effect of fly ash and silica fume on self-compacting high-performance concrete , 2021, Materials Today: Proceedings.

[11]  Wenzhe Li,et al.  Experimental research on durability of high-performance synthetic fibers reinforced concrete: Resistance to sulfate attack and freezing-thawing , 2020 .

[12]  Yunsheng Zhang,et al.  Influence of damage degree on the degradation of concrete under freezing-thawing cycles , 2020 .

[13]  Xudong Chen,et al.  Mix design for recycled aggregate pervious concrete based on response surface methodology , 2020 .

[14]  A. Mousa,et al.  A critical review and gap analysis on the use of coal bottom ash as a substitute constituent in concrete , 2020 .

[15]  Shengwen Tang,et al.  Comparison between the effects of phosphorous slag and fly ash on the C-S-H structure, long-term hydration heat and volume deformation of cement-based materials , 2020 .

[16]  E. Sadiku,et al.  Response Surface Analysis of the Corrosion Effect of Metakaolin in Reinforced Concrete , 2020, Silicon.

[17]  Xiaojian Gao,et al.  Multi-objective optimization of gap-graded cement paste blended with supplementary cementitious materials using response surface methodology , 2020 .

[18]  Xinping Li,et al.  Experimental investigation on the mechanical and rheological properties of high-performance concrete (HPC) incorporating sinking bead , 2020 .

[19]  W. Lin.  Effects of sand/aggregate ratio on strength, durability, and microstructure of self-compacting concrete , 2020 .

[20]  M. Ghrici,et al.  Combined effect of temperature and time on the flow properties of self-compacting concrete , 2020 .

[21]  Peng Wang,et al.  Leachability and adverse effects of coal fly ash: A review. , 2020, Journal of hazardous materials.

[22]  Seyed Jafar Sadjadi,et al.  Optimization of high-strength self-consolidating concrete mix design using an improved Taguchi optimization method , 2020 .

[23]  Z. Shui,et al.  Understanding the porous aggregates carrier effect on reducing autogenous shrinkage of Ultra-High Performance Concrete (UHPC) based on response surface method , 2019, Construction and Building Materials.

[24]  Jize Mao,et al.  Mesoscopic cracking model of cement-based materials subjected to freeze-thaw cycles , 2019, Construction and Building Materials.

[25]  Haiqiu Zhang,et al.  Optimum mix design of geopolymer pastes and concretes cured in ambient condition based on compressive strength, setting time and workability , 2019, Journal of Building Engineering.

[26]  Rui Rao,et al.  Effects of combined usage of GGBS and fly ash on workability and mechanical properties of alkali activated geopolymer concrete with recycled aggregate , 2019, Composites Part B: Engineering.

[27]  Alena Sicakova,et al.  Slump Loss of Concrete Based on RCA and Prepared by Specific Mixing Approach , 2018, Periodica Polytechnica Civil Engineering.

[28]  Xiangming Zhou,et al.  Chloride ion penetration resistance of concrete containing fly ash and silica fume against combined freezing-thawing and chloride attack , 2018 .

[29]  I. Masalova,et al.  The influence of variation in cement characteristics on workability and strength of SCC with fly ash and slag additions , 2018 .

[30]  José Dinis Silvestre,et al.  Effect of incorporation of high volume of recycled concrete aggregates and fly ash on the strength and global warming potential of concrete , 2017 .

[31]  Iman Ferdosian,et al.  Eco-efficient ultra-high performance concrete development by means of response surface methodology , 2017 .

[32]  Zhu-guo Li,et al.  Numerical flow simulation of fresh concrete with viscous granular material model and smoothed particle hydrodynamics , 2017 .

[33]  R. Douglas Hooton,et al.  Workability retention and compressive strength of self-compacting concrete incorporating pumice powder and silica fume , 2017 .

[34]  Zhuguo Li,et al.  Prediction of time-dependent flow behaviors of fresh concrete , 2016 .

[35]  Jeongyun Do,et al.  Cost effective optimal mix proportioning of high strength self compacting concrete using response surface methodology , 2016 .

[36]  R. Siddique,et al.  Effect of coal bottom ash as partial replacement of sand on workability and strength properties of concrete , 2016 .

[37]  Liangcai Cai,et al.  Fracture properties and response surface methodology model of alkali-slag concrete under freeze–thaw cycles , 2015 .

[38]  Mohammad Shekarchi,et al.  Studying effects of chemical admixtures on the workability retention of zeolitic Portland cement mortar , 2014 .

[39]  M. Johari,et al.  Evaluation of ultra-high-performance-fiber reinforced concrete binder content using the response surface method , 2013 .

[40]  Liangcai Cai,et al.  Freeze–thaw resistance of alkali–slag concrete based on response surface methodology , 2013 .

[41]  Hassan El-Chabib,et al.  The performance of high-strength flowable concrete made with binary, ternary, or quaternary binder in hot climate , 2013 .

[42]  Bruce W Russell,et al.  Examining the frost resistance of high performance concrete , 2009 .

[43]  M. Mouret,et al.  Self-compacting concrete paste constituents: Hierarchical classification of their influence on flow properties of the paste , 2009 .

[44]  A. Ćwirzeń,et al.  Aggregate-cement paste transition zone properties affecting the salt-frost damage of high-performance concretes , 2005 .

[45]  P. Aitcin.  The durability characteristics of high performance concrete: a review , 2003 .

[46]  J. Deja.  Freezing and de-icing salt resistance of blast furnace slag concretes , 2003 .

[47]  J. Briegel,et al.  Effects of combined , 2003 .

[48]  Lijiu Wang,et al.  Calculation of sand–aggregate ratio and water dosage of ordinary concrete , 2002 .