On the critical failure mode transition depth for rock cutting

Abstract It has been established that, in rock cutting as well as in indentation, there exist two failure modes. In the case of rock cutting, when the depth of cut is shallow the rock fails in ductile mode, and as the depth of cut increases the failure shifts to brittle mode. The critical depth, at which the failure mode transition sharpens, is proportional to some material characteristic length. This study explored the means by which this critical transition depth could be obtained. Considering the depth of cut as a measure of size and treating rock cutting to be similar in geometry, this study first demonstrated that Bažant's simple size effect equation for quasibrittle material fit rock-cutting data very well. This led to a further exploration of a characteristic length measure that has been widely used in concrete fracture research. With the aid of finite element analysis and few test data points, the critical depth was expressed in terms of the rock characteristic length. Aided by empirical relationships, the critical depth was also shown to be a function of rock uniaxial compressive strength.

[1]  S. Kahraman.  Rotary and percussive drilling prediction using regression analysis , 1999 .

[2]  C. Haberfield,et al.  Relationship between fracture toughness and tensile strength for geomaterials , 1989 .

[3]  Emmanuel M Detournay,et al.  The Scratch Test As A Means To Measure Strength of Sedimentary Rocks , 1998 .

[4]  N. A. Al-Shayea,et al.  Effect of Specimen Geometry and Testing Method on Mixed Mode I–II Fracture Toughness of a Limestone Rock from Saudi Arabia , 2000 .

[5]  A. Hillerborg.  The theoretical basis of a method to determine the fracture energyGF of concrete , 1985 .

[6]  Olgay Yaralı,et al.  The effect of mechanical rock properties and brittleness on drillability , 2011 .

[7]  S. Kahraman,et al.  Correlation of TBM and drilling machine performances with rock brittleness , 2002 .

[8]  B. N. Whittaker,et al.  Rock Fracture Mechanics: Principles, Design and Applications , 1992 .

[9]  Victor C. Li,et al.  Mechanics of shear rupture applied to earthquake zones , 1986 .

[10]  K E Puttick,et al.  The correlation of fracture transitions , 1980 .

[11]  D. F. Howarth.  Review of rock drillability and borability assessment methods , 1986 .

[12]  Z. Bažant,et al.  Fracture and Size Effect in Concrete and Other Quasibrittle Materials , 1997 .

[13]  R. Teale.  The concept of specific energy in rock drilling , 1965 .

[14]  Z. X. Zhang,et al.  An empirical relation between mode I fracture toughness and the tensile strength of rock , 2002 .

[15]  Kamyar C. Mahboub,et al.  Fracture toughness of compacted cohesive soils using ring test , 1994 .

[16]  Cemal Balci,et al.  Prediction of the penetration rate of rotary blast hole drills using a new drillability index , 2000 .

[17]  F. Kulhawy,et al.  A comparative evaluation of rock strength measures , 1984 .

[18]  Emmanuel M Detournay,et al.  Intrinsic Length Scales in Tool-Rock Interaction , 2008 .

[19]  V. Hucka,et al.  Brittleness determination of rocks by different methods , 1974 .

[20]  B. Atkinson,et al.  11 – EXPERIMENTAL FRACTURE MECHANICS DATA FOR ROCKS AND MINERALS , 1987 .

[21]  D. Howarth,et al.  The effect of pre-existing microcavities on mechanical rock performance in sedimentary and crystalline rocks , 1987 .

[22]  Saffet Yagiz,et al.  Assessment of brittleness using rock strength and density with punch penetration test , 2009 .

[23]  Ove Stephansson,et al.  Modification of the G-criterion for crack propagation subjected to compression , 1994 .