Effects of heat treatment on the microstructures and mechanical properties of as-cast Ti-45Al-2Nb-2Cr-(0.2, 0.5) C alloys

[1]  Miaoquan Li,et al.  A Review of Microstructure Control and Mechanical Performance Optimization of γ-TiAl Alloys , 2022, Journal of Alloys and Compounds.

[2]  Yuyong Chen,et al.  Effects of cycle heat treatment on the microstructure and mechanical property of as-cast γ-TiAl alloy , 2022, Materials Science and Engineering: A.

[3]  R. Unal,et al.  Development of Gamma Titanium Aluminide (γ-TiAl) Alloys: A Review , 2022, Journal of Alloys and Compounds.

[4]  T. Čegan,et al.  Microstructure and mechanical properties of Ti–45Al–2W–xC alloys , 2022, Intermetallics.

[5]  Ruirun Chen,et al.  Strengthening effect of blocky phases and γ/γ interface in the directional solidified high-Nb-containing TiAl alloy , 2022, Materials Science and Engineering: A.

[6]  Hui Peng,et al.  High-temperature microstructure stability and fracture toughness of TiAl alloy prepared via electron beam smelting and selective electron beam melting , 2021 .

[7]  Ruirun Chen,et al.  Remarkable improvement in tensile strength of a polycrystalline γ-TiAl-based intermetallic alloy by deformation nanotwins , 2021, Materials Science and Engineering: A.

[8]  Ruirun Chen,et al.  The microstructure and high cycle fatigue performance of as-cast and directionally solidified Ti46Al7Nb alloy under the three-point bending loading , 2021, Materials Science and Engineering: A.

[9]  Ruirun Chen,et al.  The effects of the formation of a multi-scale reinforcing phase on the microstructure evolution and mechanical properties of a Ti2AlC/TiAl alloy. , 2021, Nanoscale.

[10]  T. Kruml,et al.  Kinetics of cyclically-induced mechanical twinning in γ-TiAl unveiled by a combination of acoustic emission, neutron diffraction and electron microscopy , 2021 .

[11]  A. Chiba,et al.  Effect of multi-stage heat treatment on mechanical properties and microstructure transformation of Ti–48Al–2Cr–2Nb alloy , 2021 .

[12]  N. Schell,et al.  An In Situ High‐Energy Synchrotron X‐Ray Diffraction Study of Directional Solidification in Binary TiAl Alloys , 2021, Advanced Engineering Materials.

[13]  Hui Peng,et al.  Effect of heat treatment on the microstructure and anisotropy of tensile properties of TiAl alloy produced via selective electron beam melting , 2020, Materials Science and Engineering: A.

[14]  N. Ratel-Ramond,et al.  Effect of ageing on the properties of the W-containing IRIS-TiAl alloy , 2020, 2012.01760.

[15]  Yuyong Chen,et al.  Influence of nano-Y2O3 addition on microstructure and tensile properties of high-Al TiAl alloys , 2020 .

[16]  T. Kruml,et al.  Effect of heat-treatment on the microstructure and fatigue properties of lamellar γ-TiAl alloyed with Nb, Mo and/or C , 2020, Materials Science and Engineering: A.

[17]  W. Xu,et al.  Effect of Sn addition on the high-temperature oxidation behavior of high Nb-containing TiAl alloys , 2020 .

[18]  M. Cabibbo.  Carbon content driven high temperature γ-α2 interface modifications and stability in Ti–46Al–4Nb intermetallic alloy , 2020 .

[19]  A. Stark,et al.  New insights into high-temperature deformation and phase transformation mechanisms of lamellar structures in high Nb-containing TiAl alloys , 2020 .

[20]  A. Stark,et al.  Microstructure evolution and enhanced creep property of a high Nb containing TiAl alloy with carbon addition , 2019, Journal of Alloys and Compounds.

[21]  Ruirun Chen,et al.  Effects of lamellar orientation on the fracture toughness of TiAl PST crystals , 2019, Materials Science and Engineering: A.

[22]  Ruirun Chen,et al.  High-density deformation nanotwin induced significant improvement in the plasticity of polycrystalline γ-TiAl-based intermetallic alloys. , 2018, Nanoscale.

[23]  A. Weisheit,et al.  Heat treatment of laser metal deposited TiAl TNM alloy , 2018 .

[24]  Sang-Lan Kim,et al.  Advances in Gammalloy Materials–Processes–Application Technology: Successes, Dilemmas, and Future , 2018 .

[25]  N. Chen,et al.  Method for Determining Crystal Grain Size by X‐Ray Diffraction , 2018 .

[26]  Ruirun Chen,et al.  Variations of microstructure and tensile property of γ-TiAl alloys with 0–0.5 at% C additives , 2017 .

[27]  R. Hu,et al.  Understanding the role of carbon atoms on microstructure and phase transformation of high Nb containing TiAl alloys , 2017 .

[28]  H. Clemens,et al.  Modeling concepts for intermetallic titanium aluminides , 2016 .

[29]  T. Pollock,et al.  Alloy design for aircraft engines. , 2016, Nature materials.

[30]  A. Suzuki,et al.  TiAl alloys in commercial aircraft engines , 2016 .

[31]  Svea Mayer,et al.  Carbon distribution in multi-phase γ-TiAl based alloys and its influence on mechanical properties and phase formation , 2015 .

[32]  J. Yi,et al.  Grain refinement by trace TiB2 addition in conventional cast TiAl-based alloy , 2015 .

[33]  M. Siddig,et al.  Structural and Optical Properties of Mg 1-x Zn x Fe 2 O 4 Nano-Ferrites Synthesized Using Co-Precipitation Method , 2015 .

[34]  J. Lewandowski,et al.  Effects of test orientation on fracture and fatigue crack growth behavior of third generation as-cast Ti–48Al–2Nb–2Cr , 2015 .

[35]  P. Staron,et al.  In situ small-angle X-ray scattering study of the perovskite-type carbide precipitation behavior in a carbon-containing intermetallic TiAl alloy using synchrotron radiation , 2014 .

[36]  A. Stark,et al.  Effect of carbon addition on solidification behavior, phase evolution and creep properties of an intermetallic β-stabilized γ-TiAl based alloy , 2014 .

[37]  S. Gong,et al.  Microstructure and composition of cast Ti–47Al–2Cr–2Nb alloys produced by yttria crucibles , 2012 .

[38]  F. Schimansky,et al.  High carbon solubility in a γ-TiAl-based Ti–45Al–5Nb–0.5C alloy and its effect on hardening , 2009 .

[39]  D. Wee,et al.  Directional solidification and creep deformation of a Ti–46Al–1.5Mo–0.2C (at.%) alloy , 2002 .

[40]  Y. S. Lin,et al.  Template-removal-associated microstructural development of porous-ceramic-supported MFI zeolite membranes , 2000 .

[41]  W. Tian,et al.  Effect of carbon addition on the microstructures and mechanical properties of γ-TiAl alloys , 1997 .

[42]  S. Naka,et al.  Phase transformation mechanisms involved in two-phase TiAl-based alloys—I. Lambellar structure formation , 1996 .

[43]  S. Naka,et al.  Phase transformation mechanisms involved in two-phase TiAl-based alloys—II. Discontinuous coarsening and massive-type transformation , 1996 .

[44]  E. Hall,et al.  The Deformation and Ageing of Mild Steel: III Discussion of Results , 1951 .