A novel self-decoupled four degree-of-freedom wrist force/torque sensor

Abstract Haptic based human–computer interaction (HapHCI) system is currently the frontier of robot research, which is widely used in virtual reality, rehabilitation, entertainment, and so on. The measurement of the multi-dimensional interactive force between human hand and interaction device such as hand-controller, joystick, limb rehabilitation device, etc., becomes an important component of the HapHCI. However, the existing commercial 6 degree-of-freedom (DOF) force sensors are too expensive and often over designed for HapHCI not only in axis but also in bandwidth. In this paper, a novel 4 DOF wrist force/torque sensor suitable for HapHCI is developed, which is self-decoupled without calculating the decoupling matrix. Thus this type of wrist force/torque can be called as direct output force sensor, which is quite different from the conventional ones called as indirect output force sensor. Its elastic body has a simple geometry which is easy to fabricate, and half the number of strain gauges compared to the existing commercial 6 DOF force/torque sensor. So the 4 DOF force/torque sensor is much lower in cost. This paper introduces the elastic body structure of the wrist force/torque sensors, and analyses the self-decoupled principle in detail. A prototype sensor is fabricated, and the calibration test results of the 4 DOF force/torque sensor validate the analysis and demonstrate the advantage of such a sensor.