Curve Decomposition for Large Deflection Analysis of Fixed-Guided Beams With Application to Statically Balanced Compliant Mechanisms

Statically balanced compliant mechanisms require no holding force throughout their range of motion while maintaining the advantages of compliant mechanisms. In this paper, a postbuckled fixed-guided beam is proposed to provide the negative stiffness to balance the positive stiffness of a compliant mechanism. To that end, a curve decomposition modeling method is presented to simplify the large deflection analysis. The modeling method facilitates parametric design insight and elucidates key points on the force–deflection curve. Experimental results validate the analysis. Furthermore, static balancing with fixed-guided beams is demonstrated for a rectilinear proof-of-concept prototype.

[1]  Jian Zhao,et al.  Post-buckling and Snap-Through Behavior of Inclined Slender Beams , 2008 .

[2]  M. S. Evans,et al.  Dynamic modeling of compliant constant-force compression mechanisms , 2003 .

[3]  C. Tutum,et al.  A Compliant Bistable Mechanism Design Incorporating Elastica Buckling Beam Theory and Pseudo-Rigid-Body Model , 2008 .

[4]  S. Timoshenko.  Theory of Elastic Stability , 1936 .

[5]  Just L. Herder,et al.  Feasibility Study of a Fully Compliant Statically Balanced Laparoscopic Grasper , 2004 .

[6]  William D. Nix,et al.  Soft films on hard substrates — nanoindentation of tungsten films on sapphire substrates , 2001 .

[7]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[8]  Michael Curt Elwenspoek,et al.  Comb-drive actuators for large displacements , 1996 .

[9]  Just L. Herder,et al.  Negative Stiffness Building Blocks for Statically Balanced Compliant Mechanisms: Design and Testing , 2010 .

[10]  Just L. Herder,et al.  DESIGN OF A GENERIC ZERO STIFFNESS COMPLIANT JOINT , 2010 .

[11]  J. Lang,et al.  A curved-beam bistable mechanism , 2004, Journal of Microelectromechanical Systems.

[12]  Chao-Chieh Lan,et al.  An Adjustable Constant-Force Mechanism for Adaptive End-Effector Operations , 2012 .

[13]  J. F. Dijksman,et al.  A study of some aspects of the mechanical behaviour of cross-spring pivots and plate spring mechanisms with negative stiffness , 1979 .

[14]  Bobji,et al.  Estimation of hardness by nanoindentation of rough surfaces , 1998 .

[15]  B. Jensen,et al.  Modeling and Experiments of Buckling Modes and Deflection of Fixed-Guided Beams in Compliant Mechanisms , 2011 .